HUATEC GROUP CORPORATION
| Payment Terms | T/T,Paypal |
| Supply Ability | 10sets/Month |
| Delivery Time | 7-10 working days after receipt of your payment |
| Packaging Details | Carton packing box |
| Number of embedded samples | More than 10 (with a 30mm diameter mounting mold) |
| Vacuum chamber size | 300Lx 300W x 300H mm |
| Maximum vacuum degree | 0.06 MPa (60 kpa) |
| Pumping time | Less than 1 minute |
| Power supply | 220V, 50/60Hz, 200W |
| Brand Name | HUATEC |
| Model Number | HSM-V6000 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
NDT Non Destructive Testing Equipment , TG4500 Series Ultrasonic Thickness Gauge
Black NDT Non Destructive Testing Equipment , High Voltage Porosity Detector
SPY Holiday Detector Test / Non Destructive Testing Equipment for Pipe Corrosion
Non Destructive Testing Equipment , Wire Rope Inspection Steel Rope Flaw
Product Specification
| Payment Terms | T/T,Paypal | Supply Ability | 10sets/Month |
| Delivery Time | 7-10 working days after receipt of your payment | Packaging Details | Carton packing box |
| Number of embedded samples | More than 10 (with a 30mm diameter mounting mold) | Vacuum chamber size | 300Lx 300W x 300H mm |
| Maximum vacuum degree | 0.06 MPa (60 kpa) | Pumping time | Less than 1 minute |
| Power supply | 220V, 50/60Hz, 200W | Brand Name | HUATEC |
| Model Number | HSM-V6000 | Certification | CE |
| Place of Origin | China | ||
| High Light | high vacuum cold mounting press ，automatic vacuum inlay machine ，metallographic sample preparation equipment | ||
HSM-V6000 High Vacuum Cold Mounting Press Automatic Vacuum Inlay Machine for Metallographic Sample Preparation
The HSMV-6000 fully automatic vacuum cold setting machine, with PLC control, high-strength vacuum chamber and built-in vacuum pump, can complete the entire setting process with one click, including multiple vacuuming, maintaining vacuum, venting, etc.
Sample mounting, by removing air from the sample and the cold mounting material, the liquid mounting material fills the gaps in the sample, eliminating the gaps between the sample and the mounting material, thus achieving tight bonding between the sample and the mounting material. The sample is also well protected and supported during grinding and polishing.
I, Main functions
1. High vacuum: -0.06MPa(-60 kpa)
2. One click to complete the entire setting process including multiple vacuuming, holding vacuum, venting cycles, etc.
3. The process parameters such as vacuum degree, vacuum holding time, venting, cycle number, and setting completion reminder can all be set;
4. 999 sets of process parameters, set according to different materials and samples, password-protected for easy access;
5. Quickly reach the set high vacuum.
6. Large volume, transparent vacuum chamber;
7. Built-in vacuum pump, low noise, oil-free, pollution-free, maintenance-free
8. Both the inlaid sample and the liquid inlay can be pre-evacuated;
9. Using the rotating cup holder in the vacuum container, multiple samples can be poured into the mold in a vacuum at one time for vacuum mounting;
10. Special vent valves are available for multiple cycles of vacuuming and venting insert processes.
II, Technical Parameters
|
Name |
Specification |
|
Number of embedded samples |
More than 10 (with a 30mm diameter mounting mold) |
|
Vacuum chamber size |
300Lx 300W x 300H mm |
|
Maximum vacuum degree |
0.06 MPa (60 kpa) |
|
Pumping time |
Less than 1 minute |
|
Mold |
Molds for all shapes: Diameter 20,40,50mm, or rectangular molds, or disposable molds |
|
External dimensions |
Vacuum container: 300Lx 300W x 300H mm Main cabinet: L230×W300×H230mm |
|
Power supply |
220V, 50/60Hz, 200W |
|
Weight |
Vacuum chamber: 1.15kg Main cabinet: 10Kg |
III, How to use
1. Place the inlay mold in a vacuum chamber;
2. Mix the cold inlay in proportion, pour it into a disposable plastic cup, and place the plastic cup on the cup holder in the container; Cover the top lid of the vacuum chamber;
3. Perform pre-vacuuming as needed;
4. Pour the inlay into the inlay mold;
5. Select the sequence number of the required inlay process parameters by name and press the "Start" button to begin the fully automatic inlay process;
6. Wait until the machine gives a prompt sound to complete the entire process of setting.
IV, Standard Configuration
|
Name |
Quantity |
Name |
Quantity |
|
Embed the main cabinet of the machine |
1 set |
Vacuum chamber |
1 set |
|
Vacuum tube |
1 tube |
Quick Epoxy King |
1 set |
|
Product Instruction Manual |
1 copy |
|
|
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2007
Total Annual:
500000-1000000
Employee Number:
35~50
Ecer Certification：
Verified Supplier
HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified... HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified...
Get in touch with us
Leave a Message, we will call you back quickly!