Neoprene Material Titanium Coated CR Closed Cell Foam Superior Stretch

Product Specification

Product name: Titanium-Coated CR Neoprene Sheets for Premium Swimwear and Wetsuit Panels

Overview:
A B2B-engineered neoprene laminate designed specifically for titanium-coated swimwear, triathlon suits, and high-performance wetsuits. The core is genuine CR (chloroprene) closed-cell foam for superior insulation, elasticity, and compression resistance. One or both faces can be finished with a silver titanium coating that reflects body heat and sheds water, delivering a warm, low-drag surface with a sleek metallic appearance. Consistent thickness and clean, defect-free skins make this material production-friendly for OEM factories.

Key selling points:

• Titanium thermal boost: Vapor-deposited Ti layer reflects radiant heat back to the body, increasing warmth without adding thickness.
• Hydrophobic, fast-dry surface: Ti skin repels water, reduces wind chill, and minimizes water absorption.
• True CR performance: Excellent stretch, durability, and long-term compression set resistance for multi-season use.
• Factory-ready quality: Tight thickness tolerances, smooth cross-sections, and stable lamination for accurate cutting and strong seams.
• Custom build options: Ti on one or both sides, jersey/Ti combinations, printed outer jerseys, abrasion panels, and seam-taping compatibility.

Recommended applications:

• Titanium-coated swimwear and swim skins for training and open water
• Triathlon and surf wetsuits: chest/back thermal panels, shoulders, thighs
• Freedive and spearfishing suits: core warmth zones with low water exchange
• Thermal accessories: tops, vests, hoods, gloves, boots, and liners
• Hybrid garments: Ti inner lining for warmth + fabric outer for durability/branding

Technical specifications:

Why OEMs choose this Ti-CR platform:

• Warmer at the same thickness compared with standard jersey linings
• Sleek, premium look for consumer appeal on front panels and swimwear
• Reduced surface drag and water retention for lighter feel out of water
• Flexible configurations to balance warmth, stretch, and durability in each panel of the suit

Manufacturing guidance:

• Use Ti skin on the inside for warmth and low water uptake; use jersey outside for durability and printing.
• For swimwear/tri skins, consider Ti outside for hydrophobic effect and signature metallic finish.
• Recommended adhesives: low-VOC neoprene cements; roughen Ti edge areas lightly before glue-up if specified by your process.
• Seam options: blind-stitch and tape for watertight panels; flatlock where breathability and flexibility are prioritized.
• Cutting: keep blades sharp; Ti skin cuts cleanly—optimize nest orientation to align stretch with body movement.

Available upgrades:

• Inner plush or thermal brushed jersey for added comfort
• Printed outer jersey for branding and seasonal graphics
• Stair-weave or aramid-blend reinforcement fabrics for knees/elbows/seat
• DWR or PU micro-coating on jersey face for extra water repellency
• Recycled RPET jerseys for sustainability programs

Care recommendations for finished garments:

• Rinse with fresh water after salt or chlorine exposure
• Air dry in the shade; avoid prolonged direct sunlight and high-heat tumble
• Do not use solvents or harsh detergents; store flat or rolled away from heat/ozone

Notes referencing the image:

• The material shown features a smooth silver titanium skin with uniform sheen and clean edges, indicating even coating and foam density—ideal for high-end swimwear/wetsuit panels with a premium metallic aesthetic.

Contact for sampling and quotes:

• Thickness/face configuration, target stretch, and color requirements
• Intended application (swimwear, triathlon, surf, dive) and performance priorities
• Annual volume and packaging preferences to optimize cost and lead time