Shenzhen Meisha New Energy Technology Co., LTD
| Burst Discharge | 120C (3 seconds) |
| Configuration | 6S1P |
| Supply Ability | 10000 Pieces per Month |
| Packaging Details | Individual anti-static bag with EPE foam padding, UN38.3-labeled export-grade corrugated carton |
| Battery Weight | Approx. 980g |
| Continuous Discharge | 60C |
| Capacity | 8000mAh |
| Payment Terms | T/T |
| Nominal Voltage | 22.2V |
| Delivery Time | 3-7 working days for stock, 15-25 days for bulk order |
| Certification | CE, RoHS, UN38.3 |
| Brand Name | Maysa |
| Place of Origin | Shenzhen, Guangdong, China |
| Model Number | MS-6S8000-120C |
View Detail Information
Explore similar products
22.8V 6S 12000mAh Lipo Battery 200A RC FPV Drone Agriculture UAV Lithium Polymer
6S 22.2V Drone Battery Pack 6000mAh High Rate LCO Battery For RC Aircraft
30000mAh 22.2V 6S LiPo Battery LCO Aviation Battery Heavy Payload UAV Battery
Cold Resistant 12S 44.4V 12000mAh LCO Drone Battery Pack 20C 532.8Wh For Survey
Product Specification
| Burst Discharge | 120C (3 seconds) | Configuration | 6S1P |
| Supply Ability | 10000 Pieces per Month | Packaging Details | Individual anti-static bag with EPE foam padding, UN38.3-labeled export-grade corrugated carton |
| Battery Weight | Approx. 980g | Continuous Discharge | 60C |
| Capacity | 8000mAh | Payment Terms | T/T |
| Nominal Voltage | 22.2V | Delivery Time | 3-7 working days for stock, 15-25 days for bulk order |
| Certification | CE, RoHS, UN38.3 | Brand Name | Maysa |
| Place of Origin | Shenzhen, Guangdong, China | Model Number | MS-6S8000-120C |
| High Light | 6S 8000mAh Long Endurance Drone Battery ，Smart BMS Fast Charging LiPo Pack ，120C High Discharge FPV Racing Battery | ||
The Maysa MS-6S8000-120C is a premium 6S 22.2V 8000mAh LiPo drone battery engineered for maximum flight endurance and high-discharge performance. Equipped with an intelligent Smart BMS, it supports 5C fast charging and delivers an impressive 120C burst discharge rate, making it an ideal power solution for FPV racing drones, agricultural spraying UAVs, and professional aerial mapping platforms. With UN38.3, CE, and RoHS certifications, this battery meets international safety and transport standards for global export.
With 8000mAh nominal capacity, this battery provides 30-40% longer flight time compared to standard 5000-6000mAh packs. A single charge supports up to 35 minutes of hovering or 25 minutes of aggressive FPV racing, significantly reducing battery swap frequency during critical missions. Ideal for agricultural spraying drones covering large farmlands and long-range mapping operations.
Unlike basic drone batteries, the MS-6S8000-120C integrates a dedicated Smart Battery Management System that continuously monitors individual cell voltage, current, and temperature. Automatic protection against overcharge, over-discharge, over-current, short circuit, and thermal runaway ensures maximum safety during high-stress operations. Real-time data output via balance lead enables flight controller integration for in-flight battery health monitoring.
Delivering 480A instantaneous burst current at 120C rating, this battery handles aggressive throttle punches, rapid ascents, and sudden load changes without voltage sag. 60C continuous discharge (480A sustained) supports heavy-lift agricultural drones carrying 10L+ spray tanks. Stable voltage output throughout the discharge curve ensures consistent motor performance from takeoff to landing.
Supports 5C rapid charging (up to 40A), allowing a full charge in approximately 12-15 minutes when paired with a compatible high-power balance charger. This dramatically reduces ground time between flights, enabling near-continuous operation for commercial drone service providers. Standard 1C charging remains available for routine battery maintenance and longevity optimization.
Pre-installed XT60 gold-plated connector ensures low-resistance, high-current transmission with minimal heat buildup. Compatible with most 6S FPV racing drones, agricultural UAV power distribution boards, and RC aircraft systems. JST-XH 7-pin balance lead supports all mainstream balance chargers on the market.
| Parameter | Specification |
|---|---|
| Battery Type | LiPo (Lithium Polymer) |
| Configuration | 6S1P |
| Nominal Voltage | 22.2V |
| Capacity | 8000mAh |
| Continuous Discharge Rate | 60C (480A continuous) |
| Burst Discharge Rate | 120C (960A burst, 3 seconds) |
| Charging Rate | 1C standard / 5C fast charging supported |
| Connector Type | XT60 (gold-plated) |
| Balance Connector | JST-XH 7-Pin |
| Battery Weight | Approx. 980g |
| Dimensions (L x W x H) | 160 x 54 x 45 mm |
| BMS Protection | Overcharge, Over-discharge, Over-current, Short Circuit, Temperature Protection |
| Cycle Life | 300+ Cycles (at 80% capacity retention) |
| Operating Temperature Range | -10C to 60C |
| Certification | CE, RoHS, UN38.3 |
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2016
Total Annual:
2000USD-3000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Shenzhen Meisha New Energy Technology Co., Ltd. is a comprehensive enterprise mainly engaged in industry-customized battery modules, scheme design, research and development, production and marketing, and its technical level is in the leading position in the industry. Established in July 2016 with a ... Shenzhen Meisha New Energy Technology Co., Ltd. is a comprehensive enterprise mainly engaged in industry-customized battery modules, scheme design, research and development, production and marketing, and its technical level is in the leading position in the industry. Established in July 2016 with a ...
Get in touch with us
Leave a Message, we will call you back quickly!