Ni Hard 4 Nickel Sand Casting High Chromium Hard Cast Iron Liner Industrial

Product Specification

Industrial liner sets work as an assembly of wear components. A replacement Ni-Hard 4 liner must match its location, neighbouring pieces and fixing arrangement as well as the specified material. This product addresses drawing-based sand cast wear liners for buyers planning a new liner set or replacing individual parts during maintenance.

From an individual casting to a liner set

A liner may look similar to the next part while having a different curvature, edge treatment or hole pattern. The equipment drawing and position number establish which component is needed. Identifying those differences before ordering is especially useful where several parts are delivered together.

For a complete set, list each drawing revision and quantity against the assembly layout. For a single replacement, show the adjacent parts and the supporting surface where they affect fit. The goal is a part definition that the installer can recognize without relying only on a photograph.

Working geometry and wear allowance

The wear face is the surface exposed to the handled material. Behind it, the support and fixing arrangement influence how the liner carries service loads. A drawing should show the required thickness, profile and seating geometry, including any holes or recesses that determine attachment.

Wear distribution can vary across the assembly. Entry zones, changes of direction and exposed edges may lose material differently from the main surface. Existing wear records help explain which geometry is essential and where a redesign may need engineering review.

Material definition and inspection

The product material is specified as Ni-Hard 4, with the NiCr4-600 chemistry shown below. The delivery condition and hardness acceptance should be linked to the selected grade specification. Where ASTM A532 is requested, the order should state the particular class and type rather than rely on the standard name alone.

For a replacement set, inspection can combine dimensional checks with the agreed material records and part identification. A receiving checklist might include drawing revision, quantities, mounting positions and the required certificates. The actual documentation package is defined in the quotation.

Maintenance-focused purchasing

Providing the planned maintenance date is useful for discussing the supply schedule, but delivery depends on the order and production plan. Packing and identification requirements can also be included where multiple similar liners need to be separated by installation position.

For performance review, record the handled material and operating exposure alongside wear measurements. That provides a more useful comparison between replacement campaigns than a general claim that every liner lasts a fixed number of years.

Technical specification overview

NiCr4-600 chemical composition

Composition ranges are expressed as weight percent for the specified material; batch chemistry records are agreed with the order.

Discuss your wear component

Order a liner that belongs in the assembly. Send EB Castings your equipment layout, liner drawings and quantities to discuss a Ni-Hard 4 replacement set.

Product enquiries: cast@ebcastings.com or ebcastings@163.com.

Foundry process and company reference images

The process chart illustrates the casting workflow; the NEWCAST banner is a historical exhibition reference from 2015. Product shapes are shown in the gallery above.