TOBO STEEL GROUP CHINA
| Payment Terms | D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 500 TONS/MONTH |
| Delivery Time | 20 work-days |
| Packaging Details | wodern |
| Material | Super Duplex Steel |
| Standard | ASTM, GB |
| Packing | Usual in wooden cases |
| Head Shape | Round |
| Length | 0.1-14m |
| Technique | Hot Rolled |
| Type | Round pipe |
| Shape | Round |
| Brand Name | METAL |
| Model Number | ASTM B691 |
| Certification | ISO/PED/TUV |
| Place of Origin | China/Germany |
View Detail Information
Explore similar products
ASTM A798 F53 UNS S32750 6" SCH80 Super Duplex Steel Pipe
ASME B16.5 Threaded Reducing Flange NPT LJ RF Flange For Chemicals And Gas
Nickle Alloy Stainless Steel Seamless Pipe Round Shape Cold Rolled ISO
UNS N10001 Alloy B Nickel Alloy Seamless Pipe Wet Chlorine Resistant High
Product Specification
| Payment Terms | D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 500 TONS/MONTH |
| Delivery Time | 20 work-days | Packaging Details | wodern |
| Material | Super Duplex Steel | Standard | ASTM, GB |
| Packing | Usual in wooden cases | Head Shape | Round |
| Length | 0.1-14m | Technique | Hot Rolled |
| Type | Round pipe | Shape | Round |
| Brand Name | METAL | Model Number | ASTM B691 |
| Certification | ISO/PED/TUV | Place of Origin | China/Germany |
DN11 Diameter Alloy Al6XN UNS N08367 Pipe Nickel Alloy Pipe ASME SB691
Product Description
Specification : EN, ASME, AISI
Standard Specification :ASME SB691
Size : 15NB to 150NB IN
Diameter : 3.17mm to 350mm diameter
Length : 100 mm to 3000 mm Long & Above
Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc
Surface : Hot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
Condition : Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished
ASTM B691 AL6XN Round Bars Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| AL6XN | 1.4529 | N08367 |
Chemical Composition of AL6XN Round Bars
| Grade | C | Mn | Si | S | N | Cr | Ni |
| AL6XN | 0.03 max | 2.00 max | 1.00 max | 0.03 max | 0.18-0.25 | 20.00- 22.00 | 23.50- 25.50 |
Mechanical Properties of AL6XN / N08367 / 1.4529 Round Bars
| Element | Density | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| AL6XN | 8.1 g/cm3 | Psi – 110000, MPa – 760 | Psi – 55100, MPa – 380 | 45 % |
AL-6XN (AL6XN / UNS N08367) Super-Austenitic Stainless Steel
6.3% molybdenum
Over 25 years of proven seawater service
Practical immunity to chloride stress cracking
50% stronger than stainless
ASME coverage up to 800°F
Easily welded
Available in ALL product forms
AL-6XN alloy (UNS N08367) is a low carbon, high purity, nitrogen-bearing "super-austenitic" stainless alloy. The AL-6XN alloy was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments. The high strength and corrosion resistance of the AL6XN alloy make it a better choice than the conventional duplex stainless steels and a cost effective alternative to more expensive nickel-base alloys where excellent formability, weldability, strength and corrosion resistance are essential.
Performance Profile
The levels of chromium, molybdenum and nitrogen in AL-6XN all serve to provide resistance to acidic oxidizing chloride solutions previously achieved only by the nickel base alloys. High nickel (24%) and molybdenum (6.3%) contents make AL-6XN a solution to chloride ion stress corrosion cracking. Because of its nitrogen content, AL-6XN has greater tensile strength than common austenitic stainlesses, while retaining high ductility and impact strength. The ASME allowable stresses for AL-6XN are up to 75% higher than for 316L stainless, and more than twice those for the copper-nickel alloys.
Inventory
Features
Excellent resistance to pitting and crevice corrosion in chloride solutions
Practical immunity to stress corrosion cracking in NaCl environments
High strength and toughness
Applications
Company Details
Business Type:
Manufacturer,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
1998
Total Annual:
3,000,000-10,000,000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
TOBO GROUP sales head offce in Shanghai. We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicia... TOBO GROUP sales head offce in Shanghai. We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area of 6,8,000square meters, existing 260 workers and 45 technicia...
Get in touch with us
Leave a Message, we will call you back quickly!