Industrial Engine Cooling Fluid -45℃ Freezing Point 110℃ Boiling Point

Product Specification

PRODUCT DESCRIPTION

Industrial Engine Cooling Fluid is presented through its measurable source data: -45℃ freezing point and 110℃ boiling point. The mother product identifies an ethylene-glycol composition, pH 8.0, specific gravity 1.11, green or pink color and corrosion protection. This version places the temperature data and bulk-order information first, without adding toxicity, biodegradability or equipment-approval claims.

TECHNICAL AND ORDER INFORMATION

Composition: Ethylene glycol based coolant

Freezing point: -45℃

Boiling point: 110℃

pH: 8.0

Specific gravity: 1.11

Available colors: Green or pink

Corrosion protection: Yes, as described in the mother product

Packaging: 9KG, 18KG or 200KG

Minimum order quantity: 100KG

Place of origin: China

Unsupported non-toxic and biodegradability claims are intentionally omitted.

APPLICATIONS

The coolant is supplied for engine and industrial cooling systems requiring heat transfer, freeze protection and corrosion protection. The mother product supports general automotive, diesel-engine, turbine-engine, radiator and industrial cooling directions. The -45℃ freezing point and 110℃ boiling point are source-listed product values, not equipment approvals. Users should follow the engine or equipment manufacturer’s coolant specification, concentration, replacement interval and compatibility requirements.

USE, STORAGE AND MAINTENANCE GUIDANCE

Before filling, inspect the cooling system and remove incompatible residue when required. Do not mix coolants of unknown composition. Maintain the system at the level and concentration specified by the equipment manufacturer, check for leaks and monitor fluid condition during service. Store sealed containers away from contamination and extreme heat. Color is for product identification and should not be used as the only compatibility criterion.

PACKING AND SHIPPING

The mother-product information lists 9KG, 18KG and 200KG packaging. Coolant should be supplied in sealed containers, clearly labeled with product identification and protected with suitable cushioning during transport. The source description also recommends temperature-controlled transportation where required. Final package combination, pallet arrangement, labeling, delivery time and freight method should be confirmed for each order.

SUPPORT AND SERVICES

Support can be provided for product selection, package confirmation, storage, handling and routine cooling-system questions. Maintenance activities may include checking fluid level, inspecting for leaks and following the equipment manufacturer’s replacement procedure. No new certification, toxicity statement, biodegradability statement or equipment approval is claimed in this listing.

FAQ

Q1: What is the coolant composition?

A1: Ethylene glycol based coolant.

Q2: What temperature values are listed?

A2: -45℃ freezing point and 110℃ boiling point.

Q3: What other source values are retained?

A3: pH 8.0, specific gravity 1.11, green or pink color and corrosion protection.

Q4: What packaging and MOQ are listed?

A4: 9KG, 18KG or 200KG packages with a 100KG minimum order quantity.

Q5: Are non-toxic or biodegradability claims included?

A5: No. Those claims are omitted because they were not treated as sufficiently reliable.Package sizes are 9KG, 18KG and 200KG, with a listed MOQ of 100KG. This version emphasizes measurable temperature properties and bulk purchasing intent.