Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
OM-FH (flush-head) Studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press.The squeezing action embeds the head of the stud into the sheet.The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove creating a flush head assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
OM-FH4 & FHP (flush-head) Studs for Stainless Steel are designed to provide strong threads in stainless steel sheets as thin as .040" / 1 mm.Type FHP studs have high corrosion resistance.Both types are designed for use in stainless steel sheets with a hardness of 92 or less on the Rockwell "B" scale. FHL (low-displacement head) Studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.
OM-TFH (non-flush) Studs are for sheets as thin as .020 inches / 0.51 mm.They may also be used in thicker sheets where flush head studs are not required.TFH studs are installed in the sheets in the same manner as flush-head studs;However, different punches and anvils are required.When installed, the TFH stud will be securely locked into the thin sheet with ample torque-out and push-out resistances.The stud head will not be flush but will project above the sheet surface approximately .025 in./ 0.64 mm.
OM-HFE (high-strength) Studs are designed with an enlarged head diameter to provide maximum pull through in sheets as thin as .040" / 1 mm. OM-HFH (high-strength) Studs replace weld studs with easier installation at lower costs.The large stud head which projects above the sheet material distributes the axial tightening force over a large area thereby improving pull through resistance. OM-HFHB Studs are ideal for applications which demand superior electrical/mechanical attachment points.Phosphor bronze studs offer twice the conductivity of carbon steel studs.
Thread size:#2~#3/8" or M3~M10, or customization Also available unthreaded on special order.
Material and Finishes:
Type FH/FHL/TFH/HFH:Carbon Steel;Zinc Plated
Type FHS/FHLS/TFHS/HFHS:300 Series Stainless Steel;Passivation
Type FH4:400 Series Stainless Steel;Passivation
Type HFHB:Phosphor Bronze QSn4-003;Cleaning
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2000
Total Annual:
20000000-30000000
Employee Number:
>200
Ecer Certification：
Verified Supplier
OMON Group Inc. is a multinational corporation founded in year 2000. It provides a full range of products and services among the various industries globally in a tenet of Customers Satisfaction.We offer high quality standard such as screws, nuts, washers, rivets, precision lathe parts, panel fastene... OMON Group Inc. is a multinational corporation founded in year 2000. It provides a full range of products and services among the various industries globally in a tenet of Customers Satisfaction.We offer high quality standard such as screws, nuts, washers, rivets, precision lathe parts, panel fastene...
