Metal Frame 1U 24 Port Patch Panel , Multimode 48 Core Optical Patch Panel

Product Specification

Metal Frame 1U 24 Port Patch Panel , Multimode 48 Core Optical Patch Panel

Rack Mounted Fiber Optic Patch Panel, Fiber Distribution Box, Fiber ODF, 12 Ports,24 ports,36 ports,48 ports,72 ports can be with Fiber Optical Adapter& Pigtail, Fiber patch panel box.
 

1. Features:

Low excess loss & High performance
Retractable splicing tray

Convenience and ease of handling

Applied to various of optical fiber distribution frames, distribution cabinets and optical cable cross-connection cabinets.

With splice trays in the box and integrate heat sealing and wiring into one.

Apply double-sided structured optical fiber splice tray to make full use of the two sides of the board.

It's suitable for ribbon or non-ribbon optical fiber cable.

Every tray can be clamped with 12FC/SC/ST adaptors.

Install adaptors on the face side of optical fiber splice tray in a bayonet way at an oblique angle of 30 degrees to ensure curve radius

2. Application:

Telecommunication
CATV
LAN & WAN
Network

Broadband

3. Product Show:

Preparation before installation

A. Check the structure and type of fiber cables before installation; different fiber cables could not be spliced together;
B. Seal well the connective components to reduce additional loss to fibers caused by dampness; don't apply any pressure on the connective components;
C. Keep a dry and dustless working environment; don't apply any external force to the cables; don't bend or entwine cables;
D. Appropriate tools should be used for splice of cables according to the local standards during the whole
installation process.

The installation procedure of the box

A. Open the front cover of the box or the top (if necessary), take down the fiber splice tray; let in the fibers
from the fiber entry and fix them on the box; the devices for fixation are as follows: the adjustable collet,stainless fiber cable ring & nylon tie;
B. The fixation of steel core (if necessary): thread the steel core through the fixed device (optional) and screw down the bolt;
C. Leave about 500mm-800mm long spare fibers from the peeled point of fiber cable to the entrance of the splice tray, cover it with plastic protective tube, fix it with plastic tie at the T type holes; splice fibers as
usual;
D. Store the spare fibers and pigtails, plug the adapters in the slots on the tray; or first plug in the adapters and then store the spare fibers, please pay attention to the direction of coiling fibers
E. Cover the splice tray, push in the splice tray or fix it with the slot at the edge of the box;
F. Install the box inside 19" standard mounting equipment.
G. Connect the patch cord as usual.

4. Fiber Optic Patch Panel Specification:

Environment temperature:-25ºC~+45ºC
Relative humidity:≤85%(30ºC)
Atmosphere pressure:70~106KPa
Insulated Resistance:≥2×10MΩ/500V(DC)
Intensity≤15KV(DC)/1minno spark-over and no flying arc
Fiber bending radium guaranteed more than 40mm:≥40mm
Application: It is applicable for straight-through connection and diverged
connection in aerial layout , duct and direct buried. It can protect fiber
connectors.

5. FAQ:

1.Are you a trade company or a manufacturer?

We are an manufacturer specialized in Fiber Optic PLC splitter, Patch Cords,Adapter ,Fast connector and other Communication Products. OEM & ODM service are available.

2.What is your delivery date?
The delivery date is about 5-15 days after receipt of payment.

3.Can you send free samples?

Yes, free samples are available; you just need to pay the express fee. You can provide your a/c like DHL,
or you can call your courier to pick up from our office.

4.The cable marking can be as required to printing?
Yes,You have only to give us your marking.

6. Carefiber care our life:

As the specialists in the field of marketing, process development, design, engineering and project implementation, Carefiber focuses on continuous research and development to yield a range of products and service that guarantees technologically advancd solutions. 

Carefiber,as world-class manufacturer of optical fiber, cable and FTTH products, grows together with its employees, establishes strategic partnerships with its customers and gives all its efforts to support the world-wide development of optical fiber communications.

Carefiber Optical Technology Co., Ltd. is one of the leading developers and professional manufacturers of fiber optical technology and high quality fiber optical communication products. We provide Fiber optic patch cord, Fiber optic connector, Fiber optic adaptor, Fiber optic PLC splitter,Fast connector, Fiber optic patch panel,Fiber terminal box,Fiber closure and more. For high-quality patch cord production line equipment, we can also offer insertion and return loss tester, interferometer test machine, connector tip microscope, connector crimping machine, connector polishing machine, connector heating oven, automatic cable cutting machine, etc.

We sincerely invite all interested buyers to visit our company and contact us directly for further information. Carefiber, Care you life.