kocent optec limited
| Payment Terms | T/T, L/C |
| Supply Ability | 5,000pcs/week |
| Delivery Time | 5~14 working days |
| Packaging Details | Carton box, wooden pallet |
| Type | Inline type |
| Cable ports | 2 in 2 out |
| Cable diameter | 8.0~22.0mm |
| Min. capacity | 2 cores |
| Max capacity | 48 cores |
| Material | PPR, ABS, PC, PP |
| Brand Name | KCO, Kocent Optec Limited |
| Model Number | KCO-GJS22 |
| Certification | iSO9001, RoHS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Waterproof Plastic Fiber Optic Splice Closure Inline Type PC 192 Cores
Madidi 48 Cores 4 Cable Ports Fiber Optic Splice Closure Box Outdoor Water Proof
24 Cores Red Fiber Optic Splice Case / Inline Type Fiber Optic Splicing Joint
High Capacity Horizontal / Inline 144 Core Madidi Fiber Optic Splice Closure
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 5,000pcs/week |
| Delivery Time | 5~14 working days | Packaging Details | Carton box, wooden pallet |
| Type | Inline type | Cable ports | 2 in 2 out |
| Cable diameter | 8.0~22.0mm | Min. capacity | 2 cores |
| Max capacity | 48 cores | Material | PPR, ABS, PC, PP |
| Brand Name | KCO, Kocent Optec Limited | Model Number | KCO-GJS22 |
| Certification | iSO9001, RoHS | Place of Origin | Guangdong, China |
| High Light | fiber optic joint enclosure ，fiber optic junction box | ||
FTTH Nap Outdoor 8Cores Fiber Optic Splitter Splice Closure Junction Box KCO-GJS22 PC+ABS
Features
- KCO-GJS22 Fiber optic splitter closure box is new design to sastify new FTTH demand.
- Meet IP65 water-proof class, it can use for aerial installation for outdoor.
- It can install 1 pc of 1*8 PLC splitter in LGX type or mini tube type.
- Anti-ultraviolet,anti- impact and waterproof function;
- Unique flip board, flip angle ≥ 180 °, fusion area and distribution area is more obvious, reducing the cable crossing;
- Fiber optic cable can go in and out of the box without cut the cable
- Make by high quality plastic material, life time is longer.
Specification:
| Model | KCO-GJS22 |
| Dimension | 290*190*110mm |
| Cable diameter | Φ7-φ18mm |
| Cable port | 4pcs round ports 16pcs 2*3mm drop cable ports |
| Max. Split ratio | 2pcs 1x8 mini splitter |
| Max. Splice tray | 1pc |
| Max. Fusion splice | 24 cores |
Technical parameters:
- Optical fiber radius of curvature: ≥40mm
- Splice tray additional loss: ≤0.1dB
- Temperature range: -40°C ~ +60°C
- Anti side pressure: ≥2000N/10cm
- Impact resistance: ≥20N.m
- Waterproof level: IP65
Packing list:
| Main body | 1 set |
| L=400mm bare fiber buffer tube | 2 pcs |
| Hoop / clamp | 2 pcs |
| 3x100 nylon tie | 26 pcs |
| Heat shrinkable tube L=60mm | 2-72 pcs (configuration on demand) |
| User manual | 1pc |
Product pictures:
Installation way:
Characterictics:
| Characteristics | Value/Performance | Methods and Conditions |
| Mechanical | ||
| Air Tightness | No air bubble seen | Put closure under water for 15min with closure's internal air pressure set at 100kPa±5kPa. |
| Remains100kPa±5kPa | Measure the internal pressure 24 hours later | |
| Air Tightness after re-installation | No air bubble seen and pressure remains unchanged | Do re-entry and re-installation 3 times and repeat above Air Tightness Tests. |
Axial Pulling | Pressure remains unchanged | Pulling force: 1000N Time: 1min Internal air pressure: 60kPa±5kPa |
Compression | Pressure remains unchanged | Applied pressure: 2000N/100mm Time: 1min Internal air pressure: 60kPa±5kPa |
Impact | Pressure remains unchanged | Impact energy: 16N.m No. of impacts: 3 Internal air pressure: 60±5kPa |
Bending | Pressure remains unchanged | Bending angle±45°(in two opposite directions) Tension: 150N No. of bending: 10 Internal air pressure: 60kPa±5kPa |
Twisting | Pressure remains unchanged | Twisting angle: ±90° Torque: 50N No. of twisting: 10 Internal air pressure: 60kPa±5kPa |
| Thermal | ||
Temperature Cycling | Pressure drop ≤5kPa | Cycling range: -40 ~ +60°C Cycling time: 2hrs at -40°C, then 2hrs at +60°C No. of cycling: 3 Internal air pressure: 60kPa±5kPa |
| Electrical | ||
| Insulation | Resistance between metal parts:2.0x105MΩ | Soak closure into water in 1.5m-depth for 24hrs, and measure the insulation resistance after taking it out of water. |
| Resistance between each metal part and ground:2.0x105MΩ | ||
High Voltage | No voltage break-downs and sparks | Soak closure into water in 1.5m-depth for 24hrs, then apply 15kV DC to the metal parts inside |
OEM/ODM Service:
If you want to display your own brand LOGO on the goods such as cable, package bag, label or any where. It is no any problem. Our OEM and ODM service is always ready to do it.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet.
Shipping:
- International express such as UPS, TNT, DHL, etc
- Internatioal air: CA, AA, EA, etc
- By sea
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2007
Total Annual:
2000000-3000000
Employee Number:
10~200
Ecer Certification：
Active Member
KOCENT OPTEC LIMITED connect you to future. KOCENT OPTEC LIMITED is a high-tech company that focus on passive and active fiber optic product series. Established in 2007, we have more than 10 years of experience in optical fiber accessories production. With strong R&D team and close ... KOCENT OPTEC LIMITED connect you to future. KOCENT OPTEC LIMITED is a high-tech company that focus on passive and active fiber optic product series. Established in 2007, we have more than 10 years of experience in optical fiber accessories production. With strong R&D team and close ...
Get in touch with us
Leave a Message, we will call you back quickly!