| Payment Terms | L/C, D/A, D/P, T/T, Western Union |
| Supply Ability | 6,000 sets per month |
| Delivery Time | 20-25 working days |
| Packaging Details | carton/wooden case |
| Dimension | 482.0(W)*350.0(D)*6U(H) |
| Weight | ≤30kg (without rectifiers) |
| Installation | 19 inches rack mount |
| Rectifier Module Quantity | 10 |
| Rectifier Module | 3kw/pcs |
| SNMP | Yes |
| RS485 | Yes |
| Customizable | Yes |
| Brand Name | ESTEL |
| Certification | ISO9001, CE, 3C, FCC |
| Place of Origin | Shenzhen, China (Mainland) |
View Detail Information
Explore similar products
19 Inch Rack Mount 48V DC Power Supply Telecom Rectifier System Solar Module
IP55 Outdoor Power Cabinet Galvanized Steel PDU Battery ODF DCDU With Air
Double Wall Aluminum AL5052 Outdoor Power Cabinet / Outdoor Telecom Cabinet With
Three Bay Telecom Shelter Outdoor Power Cabinet Cooling Base Station Cabinet
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union | Supply Ability | 6,000 sets per month |
| Delivery Time | 20-25 working days | Packaging Details | carton/wooden case |
| Dimension | 482.0(W)*350.0(D)*6U(H) | Weight | ≤30kg (without rectifiers) |
| Installation | 19 inches rack mount | Rectifier Module Quantity | 10 |
| Rectifier Module | 3kw/pcs | SNMP | Yes |
| RS485 | Yes | Customizable | Yes |
| Brand Name | ESTEL | Certification | ISO9001, CE, 3C, FCC |
| Place of Origin | Shenzhen, China (Mainland) | ||
| High Light | customized telecom power system ,SNMP RS232 RS485 power system ,outdoor communication power system | ||
Product Overview of 30kw BTS Cabainet DC Power System
The ET48500 DC rack power system is a high-density, carrier-grade power conversion solution tailored for core telecommunications hubs, enterprise-class data centers, and industrial sites where uninterrupted DC power is non-negotiable. It accepts single-phase 220VAC input via rear copper busbars—with no built-in circuit breaker—and provides a regulated DC output adjustable from –43VDC to –58VDC, nominally set at –53.5VDC. Scalable to a full 30kW output, the system achieves conversion efficiency greater than 96% across its operating range, helping to curb energy waste and lower total cost of ownership.
Built on a fully modular and fault-tolerant platform, the system supports up to ten 3000W rectifier modules in N+1 or enhanced redundancy configurations. Each hot-swappable module weighs less than 2kg and employs forced-air cooling together with active power factor correction (≥0.99) and low total harmonic distortion (THDi ≤5%), ensuring both grid stability and high-fidelity DC output. The entire assembly is contained within a 6U chassis designed for tool-less integration into standard 19-inch cabinets. Front-facing access enables rapid module replacement and service, while rear-side copper busbars support clean, high-current cabling. An IP20-rated enclosure provides basic mechanical protection during installation and operation.
Application Scenarios of 30kw BTS Cabainet DC Power System
Features of 30kw BTS Cabainet DC Power System
| Type | ET48500 | |||
| System | Dimension | 482.0(W)*350.0(D)*6U(H) | ||
| Weight | ≤31kg (without rectifiers) | |||
| Cooling mode | Natural cooling | |||
| Installation mode | Installed on 19-inch rack | |||
| Cabling mode | Top inlet and top outlet | |||
| Maintenance mode | Front maintenance, support module grade change | |||
| Protection level | IP20 | |||
| AC Distribution |
Input mode
|
Single-phase 220V without circuit breaker, rear copper busbar wiring | ||
|
Input frequency |
45~65Hz, rated value: 50Hz/60Hz |
|||
|
AC SPD |
20kA/40kA, 8/20μs | |||
| DC Distribution |
Output voltage | -43~-58VDC, rated value: -53.5VDC | ||
| Maximum capacity | 30kw(10*3000w, N+1 redundancy) | |||
| Battery breakers | 4*125A/1P | |||
| Load breakers |
LLVD: 1*32A/1P+2*40A/1P+2*63A/1P+2*125A/1P BLVD: 2*6A/1P+2*10A/1P+2*16A/1P+2*32A/1P+2*63A/1P |
|||
| DC SPD | 10kA/20kA, 8/20μs | |||
| Rectifier | Input voltage | 85VAC~300VAC, rated 220VAC | ||
| Efficiency | >96% | |||
| Rated power | 3000W(176~300VAC) | |||
| Working temperature | -40℃~+75℃(fully output below 50℃) | |||
| Dimension | 106.5mm(W)×286mm(D)×41.5mm(1U/H) | |||
| Weight | ≤2kg | |||
| Cooling mode | Forced cooling | |||
| Power factor | ≥0.99 | |||
| THD | ≤5% | |||
| DC output | –43 ~ –58VDC, rated –53.5VDC, maximum 55A | |||
| Controller | Signal input | 4 AI(3ambient temp, 1 humidity) ,8 DI | ||
| Alarm output | 8 dry contact | |||
| RS232 | Yes | |||
| RS485 | Yes | |||
| SNMP | Yes | |||
| Display mode | LCD | |||
| Environment | Operating temperature |
-40℃ ~ +65℃ (full output below 50℃) | ||
| Storage temperature | -40℃~+70℃ | |||
| Operating humidity | 5%~95%(non-condensing) | |||
| Altitude | 0~3000m(If the altitude is within the range of 2000m to 3000m, the maximum operating temperature decreases by 1℃ as the altitude increases by 200m.) |
|||
Details of 30kw BTS Cabainet DC Power System
![]()
I/O Board of 30kw BTS Cabainet DC Power System
![]()
Power Stutas of 30kw BTS Cabainet DC Power System
![]()
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter
Year Established:
2002
Total Annual:
15 Million-20 Million
Employee Number:
101~200
Ecer Certification:
Verified Supplier
Introduction ESTEL(GUANGDONG)TECHNOLOGY CO., LTD, located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufa... Introduction ESTEL(GUANGDONG)TECHNOLOGY CO., LTD, located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufa...
Get in touch with us
Leave a Message, we will call you back quickly!