50m2 Outdoor WPC Constructions Prefabricated Termite Resistant For Garden

Product Specification

50m2 Prefabricated Termite Resistant Outdoor WPC Constructions For Garden Decorative
 

Aesthetic landscaping garden is becoming more and more commonly built in constructions from luxury resort hotels to normal private houses. And a prefabricated construction, like outdoor living sun house, cabin, pergola etc. , is playing an very significant role in the whole architecture design.
 
Prefabrication is not just crated in recent age, but dated back to the antient time worldwide, for examples, it is claimed that the world's oldest known engineered roadway, the Sweet Track constructed in England around 3800 BC, employed prefabricated timber sections brought to the site rather than assembled on-site. Another case is located in Sri Lanka. Sinhalese kings of ancient Sri Lanka have used prefabricated buildings technology to erect giant structures, which dates back as far as 2000 years, where some sections were prepared separately and then fitted together, specially in the Kingdom of Anuradhapura and Kingdom of Polonnaruwa.

Specification

WPC is doing very well in many weather durability, Ageing Resistance, Fungi Resistance, Waterproofing ect.
ORSON OUTDOOR WPCs are highly resistance to Ageing. It has been tested by Intertek, following ISO 4892-2:2013 CYCLE standard which actually is an “EXPOSURE CYCLE” test. There are THREE stages during this resist to color fading test.
-1- 500 hours duration
-2- 1000 hours duration
-3- 2000 hours duration
All of those three stages are in the same test condition.

1. 102 min light at(65±3)℃, Black-standard-temperature, relative humidity(50±10)%,Irradiance: 0.51±0.02W/(m².nm) at 340nm.
2. 18 min light and water spray, Irradiance: 0.51±0.02W/(m².nm) at 340nm.

The conclusion is “part showed SLIGHT color change
 
Apart from ageing resistant, fungi resistance is another "have to" essential aspect. Due to our outdoor WPC fencing raw material is significantly consisted of excellent formular polymers. There is too limited feeding sugar for fungi to grow.
 
When come to waterproofing, since our WPC fencing is made from WOOD PLASTIC COMPOSITE ingredients, Orson WPC is born with the supreme property of waterproofing, which naturally leads to an extremely dimensional stability, and to be an essential factor of high durability.
 
To show it in a convincible way, we tested it in a lab, and got a satisfied answer.
 
Test Method: EN 15534-4:2014 Section 4.5.5 and EN 15534-1:2014 Section 8.3.2
Test Condition:
Specimen: 101*146*23.4mm
Immersion condition: Distilled water, 20±1 ℃, 28d

Test Result:

EN15534-4:2014 requirement

 
Then, how can our termite resistant OUTDOOR WPCs meet the requirement of Non-combustibility for a prefabricated termite resistant OUTDOOR WPC CONSTRUCTION?
Proved by a test, our WPCs meet the fire resistance level of Bfl-S1.
Test Methods: EN 13501-1 fire classification of construction products and building elements-Part 1: Classification using test data from reaction to fire test EN ISO 11925-2, EN ISO 9239-1
Test data: Test condition:20±2℃
Reaction to fire-results B_fl Critical heat flux≥8 (kW.m^-2)

 
Classification of the product according to reaction to fire:
On the basis of initial testing results the product shall be declared as class: B_fl
Additional classification according to smoke generation: S1
 
So, basically, our termite resistant OUTDOOR WPC meet the essential concept of Non-combustibility for prefabricated construction.
 
Off-site fabrication is a process that incorporates prefabrication and pre-assembly. The process involves the design and manufacture of units or modules, usually remote from the work site, and the installation at the site to form the permanent works at the site.

In its fullest sense, off-site fabrication requires a project strategy that will change the orientation of the project process from construction to manufacture to installation. Our termite resistant OUTDOOR WPC can flexibly be processed according to an architect’s talented design drawing, and assembled into module groups. After manufacturing all of the prefabricated modules in our factory, those groups can be transport to your garden project site. You can bolt modules as a complete construction. It is easy workability, which will save you a lot time and money.

FAQ

Q: How long is the service lifetime of WPC products?
A: It is about 15-25 years under ideal situations.

Q: Do WPC products need painting?
A: As the difference with the wood, WPC products themselves own color, they need not extra painting.

Q: Is it easy to install WPC product?
A: It is very easy and convenient to install due to it is the profile with standard size, it only need some cropping and necessary appendix to finish the installation, need no further processing.

Q: Does the composite decking have a guarantee?
A: Yes, we believe our product is of a high standard and back that up with a warranty for your peace of mind. The Hollow Domestic Grade boards have a 10 year warranty and the Solid Commercial Grade has a 15 year warranty, provided it has been installed following our installation guidelines.

Q: What the weather temperature is suitable to use our WPC products ?
A: It's from -40°c to 60°c.

Q: Applications of WPC solid decking?
A: The WPC decking can replace wooden decking and wood preservative decking to be long-time used in outdoor, port, dock, seaside, wetlands, water platform, park roads, and many other landscaping and municipal projects.

Q: How long will the texture last?
A: Foot traffic, traffic patterns, objects like furniture dragged on the surface, weather exposure, cleaning products used, frequency of cleaning especially with commercial pressure washers (not recommended), will all affect the factory surface finish of COOWIN WPC decking and others.

Q: Is Advanced Wood Plastic Composite Coextrusion Synthetic Decking child friendly?
A: Yes. Our composite decking has excellent anti-slip qualities and all fixings are concealed, making our boards child and bare foot friendly.