Henan Korigcranes Co.,LTD.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100 set per month |
| Delivery Time | 20 working days |
| Packaging Details | Main beams are packaged by plastic cloth; Electric parts are packaged by fumigation wooden box. |
| product name | Metallurgical Single Girder Electric Overhead Traveling Cranes |
| keywords | metallurgical crane |
| Material | Q235B |
| Type | Metallurgical overhead crane |
| Sapn | 7.5-32m |
| Capacity | 1-20t |
| Power source | 380v 50hz 3phase or customized |
| Color | As your requirement |
| Warranty | 12 months |
| Control model | Pendent line or Remote |
| Brand Name | KORIGCRANES |
| Model Number | LDY |
| Certification | ISO/CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
A5 A6 A7 A8 Double Beam Eot Crane 18m Lifting With Open Winch Trolley
5t~500t Factory In Overhead Travelling Crane With Electric Hoist 380V 50hz 3P
16Ton Workshop Overhead Crane Over Head Travelling Crane Pan 10.5m 13.5m
CMAA70 Standard 20 Ton Bridge Crane Double Girder Overhead Travelling Crane
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100 set per month |
| Delivery Time | 20 working days | Packaging Details | Main beams are packaged by plastic cloth; Electric parts are packaged by fumigation wooden box. |
| product name | Metallurgical Single Girder Electric Overhead Traveling Cranes | keywords | metallurgical crane |
| Material | Q235B | Type | Metallurgical overhead crane |
| Sapn | 7.5-32m | Capacity | 1-20t |
| Power source | 380v 50hz 3phase or customized | Color | As your requirement |
| Warranty | 12 months | Control model | Pendent line or Remote |
| Brand Name | KORIGCRANES | Model Number | LDY |
| Certification | ISO/CE | Place of Origin | CHINA |
| High Light | electric overhead traveling crane 1ton ，Metallurgical electric overhead traveling crane ，Metallurgical 1 ton overhead crane | ||
LDY Metallurgical Single Girder Overhead Traveling Cranes
Metallurgical Single Girder Overhead Cranes Information
LDY Metallurgical Single Girder Overhead Cranes is used for lifting of melting metal sites of metallurgy, casting, its matching lifting mechanism is YHⅡ metallurgy electric hoist, the weight is less than 10 t. The bottom of main beam using special insulated heat . Working ambient temperature is 40℃- 60℃, humidity no more than 50%. Crane design and manufacture meet the State administration of quality supervision, inspection and quarantine of the quality of writing "2007" document No. 375, lifting other molten metal items and lifting hot solid metal location can also refer to the selection.
Metallurgical Single Girder Overhead Cranes Security measures
1) Double limit: Two sets of effective double power-off limiters are set
2) Overhead limiter:
When the hoisted object reaches 90% of the rated load, the limiter will alarm: when it reaches 95%, it will continue to alarm: when it reaches 105%, it will automatically power off and stop working
3) Insulation protection:
Install a double-layer heat insulation (internal heat insulation material) protective layer device on the lower part of the host and hooks.
4) Steel wire rope: The configuration model is 18×7+1WS high temperature resistant steel core steel wire rope.
5) Cable line:
To prevent the occurrence of dangers such as disconnection and loss of control caused by wire aging, adhesion, etc., which are prone to frequent exposure to high temperature environments, install high temperature resistant cables.
6) Distribution box:
To avoid damage to electrical components caused by high temperature and easy failure, the distribution box should be installed far away from direct heat sources and installed at the end of the taxi.
7) Reducer:
The reducer adopts helical gear three-stage reduction, and the gear and shaft are made of alloy steel or high-quality carbon steel.
8) Reel device
The reel is made of cast steel or seamless steel pipe. The spline is used to transmit power, and the drum shell is welded with steel plate
9) Hook device
The hook is made of steel forging, and the thrust ball bearing is used to connect with the shell through the hook beam, so that the hook can run freely.
Metallurgical Single Girder Overhead Cranes Photo
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2006
Total Annual:
1000000000-1500000000
Employee Number:
1500~2000
Ecer Certification：
Active Member
KORIGCRANES ( HENAN KORIGCRANES CO., LTD) located in crane hometown of China (cover more than 2/3 crane market in China), who is a trusted professional industry crane manufacturer and leading exporter. Specialized in design, manufacturing, installation and service of Overhead crane, Gantry crane, Po... KORIGCRANES ( HENAN KORIGCRANES CO., LTD) located in crane hometown of China (cover more than 2/3 crane market in China), who is a trusted professional industry crane manufacturer and leading exporter. Specialized in design, manufacturing, installation and service of Overhead crane, Gantry crane, Po...
Get in touch with us
Leave a Message, we will call you back quickly!