ShenzhenYijiajie Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 1500 |
| Delivery Time | 5-8 days |
| Packaging Details | Palletized |
| Size specification | Length 23mm, Height 0.78mm, Width 10.15mm |
| Operating temperature | When bonding with protective |
| Temperature | +10℃ to +40℃ |
| Storage temperature | -40℃ to +125℃ |
| Brand Name | YJJ |
| Model Number | LMM-H03 LMM-H04 |
| Place of Origin | USA |
View Detail Information
Explore similar products
AWM92200V Medical Air Flow Sensor For Pressure CPAP Equipment In Air
AWM3300V Microbridge Industrial Air Flow Sensor , Amplified MAF Sensor For
AWM42300V Mass Air Flow Sensor Meter Unamplified Amplified Microbridge Dry Gas
AMW3303V Gas Mass Air flow Sensor 3 Pin Heater Control Circuit
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 1500 |
| Delivery Time | 5-8 days | Packaging Details | Palletized |
| Size specification | Length 23mm, Height 0.78mm, Width 10.15mm | Operating temperature | When bonding with protective |
| Temperature | +10℃ to +40℃ | Storage temperature | -40℃ to +125℃ |
| Brand Name | YJJ | Model Number | LMM-H03 LMM-H04 |
| Place of Origin | USA | ||
| High Light | medical bidirectional gas flow sensor ，YJJ LMM-H03 air flow sensor ，medical air flow sensor with warranty | ||
Product Description:
LMM-H03 And LMM-H04 Bidirectional Gas Flow Sensors Are Used In Medical Applications
Features:
LMM-H03/04 gas flow sensor (hot-wire air mass flow) is one of the important sensors for electronic fuel injection engines. It converts the intake air flow into an electrical signal and transmits it to the electronic control unit (ECU). The circuit of the hot-wire mass air flow (MAF) sensor consists of a sensor, a control module, and the wires connecting them. The LMM-H03 sensor outputs a direct current voltage signal to the power control module (ECM), and the amplitude of this signal is proportional to the intake air volume of the engine.
The basic structure of the LMM-H03/04 hot-wire air flow sensor consists of a platinum heating wire (electrical heating wire) for sensing air flow, a temperature compensation resistor (cold wire) for calibration based on intake temperature, and a control circuit. The board that controls the hot-wire current and generates an output signal is composed of components such as the air flow sensor housing. The LMM-H03/04 bidirectional gas flow sensor is suitable for applications with high reliability requirements, such as medical or industrial gas flow applications.
LMMH03/04 is directly installed in the flowing medium and is highly sensitive to heat transfer within the micrometer range. This heat transfer is detected by the micro-processed silicon device, which is installed on the ceramic substrate with the shape of the sensing element already determined.
The functional principle of LMM-H03/04 is a thermal film anemometer, which is the membrane version of the hot wire anemometer. The heating element (heater) of the film is heated to create a specific temperature difference with the air. When the flow rate is zero, the thermal conductivity of the air causes heat dissipation.
When the airflow passes through, the heat dissipation increases gradually with the increase of the flow velocity. The sensing element can operate in a constant power and constant pressure mode. However, it is recommended to use LMM-H03/04 in the described constant temperature difference (CTD) mode.
In the CTD mode, electronic components can quickly detect any changes in thermal equilibrium and compensate for them by adjusting the power setting with the help of a heater. This enables very reliable measurement of gas flow within an extremely short time constant (at the millisecond level).
Advantages
Thermal film anemometer element
High reliability, good long-term stability
Bidirectional airflow measurement
Fast response time
Compliant with ISO TS16949 manufacturing standards
Adaptable to various geometric structures of airflow channels
Can be used for almost all types of gases and volatile substances Application
Engine control
Industrial airflow measurement
Leak detection in compressed air systems
Respiratory flow meter
Gas flow sensor, application, intake port of internal combustion engine, pulmonary function meter and industrial gas flow.
CPAP ventilator device
How can gas flow sensors be applied in the medical field?
In applications such as continuous positive airway pressure (CPAP) devices, gas flow sensors can measure the oxygen input level entering the system, ensuring adequate air supply. Understand how these sensors and other technologies are integrated with CPAP devices.
Specifications:
| Operating Voltage | 3.3V |
| Operating Current | 1.5mA |
| Temperature Range | -40°C to 125°C |
| Range | 5 - 6000G |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!