ShenzhenYijiajie Electronic Co., Ltd.
| Current Sensitivity | 75±25 nA/ppm |
| Supply Ability | 1500 |
| Repeatability Error | <±2% FS |
| Payment Terms | L/C,D/A,D/P,T/T, |
| Linearity | 0-10000 ppm |
| T90 Response Time | <40s |
| Packaging Details | Palletized |
| Acidic Gas Filtration Capacity | >200000 ppm |
| Delivery Time | 5-8 days |
| Polarization Bias Voltage | 0V |
| Standard Measurement Range | 0-10000 ppm |
| Clean Air Zero Point Drift | ±5ppm CO Equivalent Offset |
| Model Number | GS+A5CO |
| Place of Origin | Britain |
| Brand Name | DDS |
View Detail Information
Explore similar products
Storm Pro 2 Portable Lightning Storm Detector Storm Detection and Early Warning
H2S-AH High Current Hydrogen Sulfide Sensor for Portable Devices 0.03 PPM
NH3-B1 Ammonia Gas Sensors A-Series Four-Electrode Electrochemical
H2S-B4 Hydrogen Sulfide Sensor High Resolution 4-electrode H2S No Condensation
Product Specification
| Current Sensitivity | 75±25 nA/ppm | Supply Ability | 1500 |
| Repeatability Error | <±2% FS | Payment Terms | L/C,D/A,D/P,T/T, |
| Linearity | 0-10000 ppm | T90 Response Time | <40s |
| Packaging Details | Palletized | Acidic Gas Filtration Capacity | >200000 ppm |
| Delivery Time | 5-8 days | Polarization Bias Voltage | 0V |
| Standard Measurement Range | 0-10000 ppm | Clean Air Zero Point Drift | ±5ppm CO Equivalent Offset |
| Model Number | GS+A5CO | Place of Origin | Britain |
| Brand Name | DDS | ||
| High Light | electrochemical carbon monoxide sensor 0-4000ppm ，carbon monoxide sensor for smoke detection ，gas sensor with electrochemical technology | ||
Product Description:
YJJ GS+A5CO Carbon Monoxide Sensor with a of 0-4000ppm Suitable for Smoke Emission Detection
Features:
I. Basic Information
Model: GS+A5CO
Package Specification: 5-Series, 4-pin pin interface
Detected Gas: Carbon Monoxide (CO)
Sensing Principle: Four-electrode electrochemistry, hydrogen compensation electrode, extremely low hydrogen cross-interference
Compliance Standard: EN50379-1 (Special Standard for Smoke Gas Analyzer)
II. Core Performance Parameters (Test Environment: 20℃, 50% RH, Standard Atmospheric Pressure)
Standard Measurement Range: 0-10000 ppm (10000 ppm); Commonly used calibration range is 0-4000 ppm
Maximum Tolerable Overload Concentration: 20000 ppm
Current Sensitivity: 75±25 nA/ppm, typical 60-70 nA/ppm
T90 Response Time: <40s
Clean Air Zero Point Drift: ±5ppm CO Equivalent Offset
Acidic Gas Filtration Capacity: >200000 ppm·h
Linearity: Output is linear within the 0-10000 ppm range
Repeatability Error: <±2% FS
Recommended Sampling Load Resistance: 10 Ω
Polarization Bias Voltage: 0V, No External Polarization Voltage Required
Hardware Resolution: Typical <1ppm (Dependent on the Back-end Circuit Board ADC)
III. Environmental Operating Conditions Parameters
Long-term Working Temperature: -20℃ ~ +50℃
Air Pressure Compatibility: 800-1200mbar
Applicable Humidity: 15%-90% RH, Prohibit Sensor Internal Condensation and Water Infiltration
Storage Temperature: -30℃ ~ +50℃
IV. Lifespan and Hardware Specifications
Original Factory Warranty Duration: 24 Months
Regular Operating Life: 2-3 Years
Probe Outer Diameter: Φ28.5mm, Standard 5-Series Cylindrical Packaging
V. Core Product Advantages
Built-in Hydrogen Compensation Electrode, Solving the Problem of High CO Values Caused by H₂ in Boiler Smoke Gas
Resistant to Acidic Exhaust Gases, Suitable for High Temperature Flue, Combustion Tail Gas Harsh Environments
Can Independently Detect CO and Hydrogen Signals
High Stability, Small Temperature Drift, Fast Recovery, Can Directly Replace City A5F Carbon Monoxide Probe
VI. Application Scenarios
Portable Boiler Smoke Gas Analyzer, Combustion Efficiency Detector
Motor Vehicle Exhaust, Emission Monitoring Equipment
Basement, Garage, Power Distribution Room Carbon Monoxide Alarm
Metallurgical Factory, Chemical Plant Toxic Gas Transmitter
Wall-mounted Boiler, Gas Equipment Combustion Tail Gas Monitoring
Specifications:
| Package Specification | 5-Series, 4-pin pin interface |
| Detected Gas | CO |
| Sensing Principle | Four-electrode electrochemistry |
| Compliance Standard | EN50379-1 |
| Environment | 20℃, 50% RH |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!