ShenzhenYijiajie Electronic Co., Ltd.
| Matching Load Resistance | 10 Ω |
| Packaging Details | Palletized |
| Zero Output | 0 - +1 ppm |
| Supply Ability | 1500 |
| Sensitivity | 2000 ± 500 nA/ppm |
| Recovery Time | T90 ≤ 180 s |
| Payment Terms | L/C, D/A, D/P, T/T, , |
| Resolution | 0.05 ppm |
| Response Time | T90 ≤ 140 s |
| Delivery Time | 5-8 days |
| Maximum Overload Tolerance | 20 ppm |
| Measurement Range | 0 - 10 ppm ETO |
| Model Number | ETO/M-10 |
| Brand Name | YJJ |
| Place of Origin | Switzerland |
View Detail Information
Explore similar products
Storm Pro 2 Portable Lightning Storm Detector Storm Detection and Early Warning
H2S-AH High Current Hydrogen Sulfide Sensor for Portable Devices 0.03 PPM
NH3-B1 Ammonia Gas Sensors A-Series Four-Electrode Electrochemical
H2S-B4 Hydrogen Sulfide Sensor High Resolution 4-electrode H2S No Condensation
Product Specification
| Matching Load Resistance | 10 Ω | Packaging Details | Palletized |
| Zero Output | 0 - +1 ppm | Supply Ability | 1500 |
| Sensitivity | 2000 ± 500 nA/ppm | Recovery Time | T90 ≤ 180 s |
| Payment Terms | L/C, D/A, D/P, T/T, , | Resolution | 0.05 ppm |
| Response Time | T90 ≤ 140 s | Delivery Time | 5-8 days |
| Maximum Overload Tolerance | 20 ppm | Measurement Range | 0 - 10 ppm ETO |
| Model Number | ETO/M-10 | Brand Name | YJJ |
| Place of Origin | Switzerland | ||
| High Light | ETO/M-10 ethylene oxide gas sensor ，medical sterilization gas sensor ，electrochemical gas sensor 0-10ppm | ||
Product Description:
YJJ ETO/M-10 Ethylene Oxide Electrochemical Gas Sensor 0-10ppm for Medical Sterilization Industry
Features:
I. Basic Information
Model: ETO/M-10
Detected Gas: Ethylene Oxide (Ethylene Oxide, ETO/C₂H₄O, highly toxic disinfectant gas)
Detection Principle: Three-electrode liquid electrochemical sensing, gas permeation membrane undergoes oxidation reaction, outputs microcurrent signal, current is linearly proportional to ETO concentration
Package Specifications: Standard 4-pin cylindrical universal package, compatible with industry 4-series sensor pins, can directly replace City, sensors of the same range for the same range of ETO
II. Core Technical Parameters (Standard Operating Conditions: 20℃, 50% RH, 101.3kPa) Table
Parameter Item Standard Specification Value
Measurement Range 0 - 10 ppm ETO
Maximum Overload Tolerance 20 ppm (no damage during short-term impact)
Sensitivity 2000 ± 500 nA/ppm
Resolution 0.05 ppm (accurate identification of trace and low concentration)
Response Time T90 ≤ 140 s
Recovery Time T10 ≤ 180 s
Zero Output (Clean Air) 0 - +1 ppm equivalent signal
Long-Term Drift signal attenuation < 2%
Recommended Bias Voltage +300 mV
Matching Load Resistance 10 Ω
Operating Temperature Range -40℃ ～ +50℃
Operating Humidity 15% - 90% RH (no condensation)
Air Pressure Compatibility Standard atmospheric pressure ±10%
Expected Service Life 2 years in clean air environment
Original Factory Warranty 12 months
Storage Life (Sealed Original) 6 months, storage temperature 10 - 30℃
Physical Dimensions Φ20mm cylinder, standard 4-pin straight insertion, weight approximately 5.4g
III. Core Product Advantages
High Selectivity: Specific response to ethylene oxide, extremely low cross-interference from ethanol, formaldehyde, and low-concentration CO, significantly reducing false alarms in disinfection workshops；
Ultra-Wide Temperature Range Operation: Stable output even in extremely low temperature environments, suitable for cold storage and low-temperature sterilization equipment；
Ultra-High Resolution: 0.05 ppm resolution capability, meeting extremely low concentration safety monitoring requirements for occupational hygiene；
Universal Standardized Pin: 4-pin universal packaging, no need to modify the board for customers' existing detectors, direct replacement is possible；
Stable Low Drift: Three-electrode structure suppresses temperature and humidity drift, small zero-point offset over long-term use, long calibration cycle.
IV. Main Application Scenarios
1. Medical Sterilization Industry (Core Application)
Hospital ethylene oxide sterilization cabinets, medical dressings / medical equipment disinfection workshops, real-time monitoring of residual ETO leakage after sterilization to protect the safety of medical staff；
2. Pharmaceutical, Medical Device Factory
ETO disinfection workshops for disposable syringes, artificial prostheses, sterile consumables；
3. Laboratories and Quality Inspection Equipment
Portable ETO gas detector, fixed toxic gas alarm, factory ventilation exhaust gas monitoring；
4. Chemical, Textile Industry
ETO raw material storage tanks, pipeline leakage detection； safety monitoring of textile fabric fumigation disinfection workshops；
5. Extension of Your Company's Business
Automation of sterilization equipment, toxic gas security monitoring in fuel cell factory auxiliary disinfection sections.
Specifications:
| Measurement Range | 0 - 10 ppm ETO |
| Maximum Overload Tolerance | 20 ppm |
| Sensitivity | 2000 ± 500 nA/ppm |
| Resolution | 0.05 ppm |
| Response Time | T90 ≤ 140 s |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!