ShenzhenYijiajie Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 2200 |
| Delivery Time | 5-8 days |
| Packaging Details | Box pack |
| Measured Medium | N₂, Air, O₂, Ar, CO₂, etc |
| Range | 0.5–50 SLPM |
| Accuracy | ±(1.5% Reading + 0.2% FS) |
| Repeatability | ≤±0.5%FS |
| Range Ratio | 100:1 |
| Response Time | ≤100ms |
| Starting Flow | Low to 8mm/s |
| Power Supply | 12–24 VDC ±10% |
| Brand Name | YJJ |
| Model Number | MF5006-N2M-E-0.5-50-15-AB-D-A |
| Place of Origin | USA |
View Detail Information
Explore similar products
AWM92200V Medical Air Flow Sensor For Pressure CPAP Equipment In Air
AWM3300V Flow Sensor Microbridge Industrial Air Flow Sensor Amplified MAF Sensor
AWM42300V Mass Air Flow Sensor Meter Unamplified Amplified Microbridge Dry Gas
AMW3303V Gas Mass Air flow Sensor 3 Pin Heater Control Circuit
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 2200 |
| Delivery Time | 5-8 days | Packaging Details | Box pack |
| Measured Medium | N₂, Air, O₂, Ar, CO₂, etc | Range | 0.5–50 SLPM |
| Accuracy | ±(1.5% Reading + 0.2% FS) | Repeatability | ≤±0.5%FS |
| Range Ratio | 100:1 | Response Time | ≤100ms |
| Starting Flow | Low to 8mm/s | Power Supply | 12–24 VDC ±10% |
| Brand Name | YJJ | Model Number | MF5006-N2M-E-0.5-50-15-AB-D-A |
| Place of Origin | USA | ||
| High Light | MEMS thermal gas flowmeter 0.5-50 SLPM ，Medical air flow sensor 1.5MPa ，Gas mass flowmeter with warranty | ||
Product Description:
YJJ MF5006-N2M-E-0.5-50-15-AB-D-A MEMS Thermal Gas Mass Flowmeter 0.5 - 50 SLPM 1.5MPa
Features:
I. Model Disassembly (Detailed Meanings of Each Position)
MF5006-N2M-E-0.5-50-15-AB-D-A
MF5006: Series, DN6 (Inner Diameter 6mm, 1/4" Interface)
N2: Standard Gas = Nitrogen (N₂)
M: MEMS Thermal Mass Flow Principle
E: Aluminum Alloy Shell
0.5: Minimum Range 0.5 SLPM (Standard Liters Per Minute at 20°C / 1 atm)
50: Maximum Range 50 SLPM
15: Maximum Working Pressure 1.5 MPa
AB: Output = 4-20mA + RS485 (Modbus-RTU)
D: With LCD Display (Instantaneous + Cumulative Flow)
A: Standard Configuration (No Special Customization)
II. Core Parameters (MF5006-N2M-E-0.5-50-15-AB-D-A)
1. Measurement Performance
Measured Medium: N₂, Air, O₂, Ar, CO₂, etc. Dry, Clean, Oil-Free, No Condensation Gas
Bore / Interface: DN6, 1/4" Inner Thread (G1/4 or NPT1/4)
Range (N₂, 20°C / 1 atm): 0.5–50 SLPM (Standard Liters / Minute)
Accuracy: ±(1.5% Reading + 0.2% FS)
Repeatability: ≤±0.5%FS
Range Ratio: 100:1 (Wide Range, Low Flow Sensitivity)
Response Time: ≤100ms (Fast Follow Flow Changes)
Starting Flow: Low to 8mm/s (Extremely Small Flow Measurable)
2. Electrical and Output
Power Supply: 12–24 VDC ±10%, Power Consumption < 2W
Analog Output: 4–20mA (Corresponding to 0–50 SLPM)
Communication: RS485 (Modbus-RTU), Networkable Remote Monitoring
Display: LCD Screen, Displays Instantaneous Flow (SLPM) + Cumulative Flow
3. Mechanical and Environment
Shell Material: Aluminum Alloy (E-Type), Lightweight, Corrosion Resistant
Contact Material: 316L Stainless Steel
Working Pressure: ≤1.5 MPa (15bar)
Working Temperature: -20°C to +60°C
Humidity: 0–95% RH (No Condensation)
Protection Grade: IP40 (Dustproof, Indoor / General Industrial Environment)
Installation: Horizontal / Vertical Installation at Will, No Straight Pipe Segment Required (Advantage of MEMS Thermal)
4. Principle Characteristics
MEMS Thermal: Direct Measurement of Mass Flow, No Temperature / Pressure Compensation, AccuracyTemperature / Pressure Fluctuations Affect
Ultra-Low Differential Pressure: Minimal Pressure Loss, Suitable for Low Pressure / Small Flow Systems
High Stability: Zero Point Drift Small, Long-Term Maintenance-Free
III. Main Applications (Precise Measurement of Small Bore, Low Flow Gases)
1. Semiconductor / Electronics (Core Scenario)
High-Purity Nitrogen (N₂), Oxygen (O₂), Argon (Ar), Process Gas Ratio and Flow Monitoring
Small Flow Gas Precise Control in Wafer Processing, Diffusion, Etching, Deposition Equipment
2. Medical / Pharmaceutical
Hospital Oxygen / Nitrogen Delivery Flow Monitoring (Respirators, Anesthesia Machines)
Pharmaceutical Sterile Gas, Protective Gas (N₂/Ar) Precise Measurement
3. Laboratory / Research
Small Flow Ratio, Mixing, Reaction Gas Monitoring of Experimental Gases (N₂/O₂/Ar/CO₂)
Low Flow Gas Measurement for Catalysis, Combustion, Environmental Sampling, etc.
4. Industrial Automation
Small Flow Stable Control of Welding Protective Gas (Ar/CO₂)
Flow Monitoring of Precise Processing, Inspection Equipment Blowout / Protection Gas
Small Branch of Compressed Air / Equipment End Energy Consumption Measurement
5. Environmental / New Energy
Low Concentration Exhaust Gas, Tail Gas Small Flow Sampling Monitoring
Low Concentration Hydrogen Gas Measurement for Hydrogen Fuel Cells
Specifications:
| MF5006 | Series, DN6 |
| N2 | Standard Gas = Nitrogen (N2) |
| M | MEMS Thermal Mass Flow Principle |
| E | Aluminum Alloy Shell |
| 0.5 | Minimum Range 0.5 SLPM |
| 50 | Maximum Range 50 SLPM |
| 15 | Maximum Working Pressure 1.5 MPa |
| AB | Output = 4-20mA + RS485 |
| D | With LCD Display |
| A | tandard Configuration |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!