ShenzhenYijiajie Electronic Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, , |
| Supply Ability | 5000pcs |
| Delivery Time | 3-5work days |
| Packaging Details | Paper box |
| Recommended excitation | 10 ± 0.01 Vdc |
| Power consumption | 50 mW |
| Null voltage | 1.00 ± .10 Vdc |
| Repeatability and hysteresis, max. | ± 1.0% reading |
| Maximum Response Time | 3. 0 msec |
| Brand Name | Honeywell |
| Model Number | AWM3150V |
| Place of Origin | USA |
View Detail Information
Explore similar products
AWM92200V Medical Air Flow Sensor For Pressure CPAP Equipment In Air
AWM3300V Flow Sensor Microbridge Industrial Air Flow Sensor Amplified MAF Sensor
AWM42300V Mass Air Flow Sensor Meter Unamplified Amplified Microbridge Dry Gas
AMW3303V Gas Mass Air flow Sensor 3 Pin Heater Control Circuit
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, , | Supply Ability | 5000pcs |
| Delivery Time | 3-5work days | Packaging Details | Paper box |
| Recommended excitation | 10 ± 0.01 Vdc | Power consumption | 50 mW |
| Null voltage | 1.00 ± .10 Vdc | Repeatability and hysteresis, max. | ± 1.0% reading |
| Maximum Response Time | 3. 0 msec | Brand Name | Honeywell |
| Model Number | AWM3150V | Place of Origin | USA |
| High Light | Industrial Air Flow Sensor ，50 mW Air Flow Sensor ，3.0 msec Air Flow Sensor | ||
AWM3150V Air Flow Sensor
GENERAL INFORMATION :
AWM3000 Series Microbridge Mass Airflow Sensors operate on the theory that airflow directed across the surface of a sensing element causes heat transfer. Output voltage varies in proportion to the mass of air or other gas flowing through a given sensor's inlet and outlet ports. Current sink/source. Maximum current ratings are 10 mA sinking and 20 mA sourcing, governed by an LM224 operational amplifier in the final stage of the instrumentation amplifier.
MEDIA CONTAMINATION :
Media flowing through the sensor should be free of condensing moisture and particulate contaminants. An inexpensive 5 micron filter upstream of the sensing element substantially reduces the risk of damage due to contaminants.
CLEANING:
Cover the ends of the ports when cleaning. Certain solvents may attack the epoxy used to seal the chip tubes to the ceramic substrate.
SOL DERING INSTRUCTIONS:
Please note: sensor should be securely attached to pr inted circuit boar d before soldering. Hand soldering: Use temperature controlled s S t m. Use Type R flux r oldering iron with 3,2 mm (1/8 in.) diameter tip. et temperature at 400 °C [750 °F]. Hold tip on erminal for 5 seconds maximu osin core solder and hand cle [4 an after soldering. Wave soldering: Set solder temperature at 250 °C 80 °F) maximum. Run belt at minimum of 1.54 m [5 ft] per minute. Cover tube ends when cleaning.
| Storage Temperature range | -40 °C to 90 °C [-40 °F to 194 °F] |
| Termination | 0,635 mm [0.025 in] square |
| Weight | 10,8 g [0.381 oz] |
| Shock rating (5 drops, ea. of 6 axes) | 100 g peak |
| Maximum Overpressure | 25 psi |
| Output voltage @ laser trim point | 1.5 Vdc @ 5 sccm |
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2006
Total Annual:
900000-1000000
Employee Number:
50~80
Ecer Certification：
Verified Supplier
Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph... Yijiajie Electronics is a full range of silicon pressure sensors from the United States, FREESCALE/, GE, MEAS, SMI, and a full range of sensing and control products from the United States pressure, temperature and humidity, gas flow, current, Hall effect, etc., Japan HAMAMATSU flame, UV sensors, ph...
Get in touch with us
Leave a Message, we will call you back quickly!