Qinyang City Haiyang Papermaking Machinery Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 200sets per year |
| Delivery Time | 2-6months |
| Packaging Details | Wooden Case and Plastic Film |
| Name | Carton box production line |
| Finished product | carton board |
| Condition | New |
| Type | Packaging Line |
| Warranty | 1 Year |
| Brand Name | HAIYANG |
| Place of Origin | CE |
View Detail Information
Explore similar products
Fully Automatic 3 5 7 Ply Corrugated Carton Box Making Machine
Single / Double Face Corrugated Paper Board Making Machine 150m/min
1600mm Width 3 Layer Corrugated Carton Box Production Line
Automatic Corrugated Paperboard Production Line 100m/min
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 200sets per year |
| Delivery Time | 2-6months | Packaging Details | Wooden Case and Plastic Film |
| Name | Carton box production line | Finished product | carton board |
| Condition | New | Type | Packaging Line |
| Warranty | 1 Year | Brand Name | HAIYANG |
| Place of Origin | CE | ||
| High Light | 3 Layer Corrugated Paperboard Production Line ，7 Layer Corrugated Cardboard Box Making Machine ，Corrugated Paperboard Production Line 200m/min | ||
High speed 3/5/7 ply corrugated paperboard production line
/packaging machine/carton box making machine price
Production description
FRD150-1600-5-ply Corrugated Board Making plant
A. Main technical parameters
1. Max production width: 1600mm
2. Design Speed: 200m/min
3. Economic speed: 150m/min (3-ply)
120-100/min (5-ply)
Annotation: the Kraft paper for testing of the corrugation plant line should keep the requirements as follows. (The temperature of the surface of the heating parts in the corrugation plant line is above 172 degree)
Kraft paper’s level can not be lower than B level Water content: 11%±2%
Face Paper: 100—250g/m2 Bottom Paper:100--250g/m2 Flute Paper: 100—250g/m2
4. Flutes combinations: A, C, B, E (or choose by the customer)
5. Steam requirements:
Steam cost: 2500—3000Kg/Hr Max pressure: 1.2Mpa
Practical Pressure: 0.8-1.1Mpa
6. Power supply: 380V 50Hz (Three phase four wire system)
7. Total Power: About 219kw
Practical power cost: About 185kw
8. Area of the Production Line covers: About 83m×12m×5m (The specific length is based on the foundation drawing)
9. Corrugated board stacking direction: left or right according to the workshop to make sure the drive in left direction or right direction.
10. Equipment suitability: Kraft paper A, B, C native paper or imported Kraft paper.
B The parts that the customers should buy or prepare by themselves:
1 Steam heating system: suggest buying a 4000kg/hr steam boiler, pressure: 1.25Mpa, steam pipe.
2 Air compressor, air-pipe, and the glue transport pipe.
3 Electric power source, power wires connect from operation counter to power counter, and wire and pipe.
4 Water source, water transport pipe, water bucket
5 Water, electric, gas, ground work and civil work.
6 The material paper and corn starch (potato), caustic soda, borax are used when the 1st testing of the production line.
7 Lubricating oil, consistent lubricant, machine oil, hydraulic oil.
8 Provide food, accommodation of the installer and offer workers when installing
1.Electric Shaftless Mill Roll Stand
Technical Parameters
* Operation style of base paper stand: Electrically mechanical type
* Dia. of clip paper: Φ350mm - Φ1400mm
* Max. weight of one side: 2000kg
* Working pressure of air supply: 0.6-0.9 MPa
* Total power: 5.2kw
Structural Features
A. The symmetric structure can be installed with two bundles of base paper at the same time used to change papers without halt.
B. This machine adopts the electrical driver to finish lifting up or down, clamping, loosening and centering the base paper.
C. This machine adopts the pneumatic tension controller to adjust the tensile force of base paper.
D. The head of clip paper adopts expansion style.
E. The tension control adopts pneumatic braking, which can also be on-line control together with Paper Splicer.
| Max. working width | 1600mm |
| Max working steam pressure: | 1.0-1.3Mpa |
| Steam temperature | 160—210 centigrade |
| Power requirements: | 380V, 50Hz |
| Diameter of heating roller | 400mm |
2.High Speed Fingerless Type Single Facer
Single Facer Specification:
| Max. machine speed | 80m/min |
| Economic speed | 60m/min |
| Max. working width | 1600mm |
| Max working steam pressure: | 1.0-1.3Mpa |
| Steam temperature | 160—210 centigrade |
| Power requirements: | 380V, 50Hz |
| Diameter of corrugated roller | 268mm |
| Diameter of Press roller . | 268mm. |
| Diameter of preheater roller | 280mm |
| Diameter of Glue roller | 215mm |
| Diameter of doctor roller | 105mm |
*Design speed: 80m/min.
*Corrugated rollers made of 48CrMo alloy steel, with heat treatment for hardness HRC58-60, surface plated with chrome treatment.
*corrugating roller: Dia.280mm with a drum.
*Press roller: Dia.320mm. with drum.
* Vacuum suction Fingerless design provides perfect flute formation in high speed manufacturing.
* Gimbal driver system. Individual immersion oil gear type drive box, separating dynamic vibrations improve running stability, easy and fast for maintenance
*Gluing roller: surface is embossed with netting design and chrome plated.
*Adjustment of upper corrugated roller, pressure roller and glue roller controlled by pneumatic system.
*With preheating and preconditioning rollers.
3.Overhead Bridge
Vacuum tension control ,Electric paper way control.
Company Details
Business Type:
Manufacturer
Year Established:
1989
Total Annual:
30000000-50000000
Employee Number:
100~200
Ecer Certification：
Active Member
*********************** WHO WE ARE ******************** ... *********************** WHO WE ARE ******************** ...
Get in touch with us
Leave a Message, we will call you back quickly!