E345 C13 293-0818 3520205 352-0205 High Quality Excavator Engine Spare Parts

Product Specification

E345 C13 293-0818 3520205 352-0205 High Quality Excavator Engine Spare Parts Water Pump

Product Description

Product advantages

1. The water pump impeller adopts the raw material Seiko pure aluminum leaf
2. Using imported high-quality bearings
3. Use high quality seals to ensure no water leakage
4. Original 1:1 mold opening design and manufacture, no deviation in size, accurate hole position
5. The water pump shaft adopts VG drill steel, pure fluorine rubber oil seal
6. Using high-strength materials, corrosion resistance, wear resistance, and long service life
7. 100% inspection of each product before shipment, stable quality and superior performance

How the product works

In the upper water outlet of the engine, there is a water pump, which passes through the belt
to drive, pump out the hot water in the water channel of the engine block, and pump the cold water
enter.
The water pump bearing and impeller are driven to rotate by the pulley, and the
The coolant is driven by the impeller to rotate together, and is thrown away under the action of centrifugal force
to the edge of the pump casing, while generating a certain pressure, and then from the outlet
Outflow from water channel or water pipe. At the center of the impeller, the coolant is thrown out
The pressure is reduced, and the coolant in the water tank is between the pump inlet and the center of the impeller.
Under the action of pressure difference, it is sucked into the impeller through the water pipe to realize the reciproion of the coolant
cycle.

Water pump failure performance

1. Unstable idle speed:
The failure of the water pump can cause the rotational resistance of the water pump to increase.

2. There will be noise in the engine part:
This sound is a rolling friive, similar to the sound of "boom boom boom".
This sound can be accelerated as the engine rotates and changes in volume
change. This noise generally increases with the severity of the fault
increasingly obvious.

3. Cooling system failure
1) Hot air is not hot
The most overlooked phenomenon caused by lack of flow. Engine water in winter
After warming up,
The hot wind cannot blow out, and inexperienced people even think that
The car is dead, it's time for a replacement. In fact, just replace a small water pump.
All can solve the problem.

2) Engine water temperature is unstable:
The performance is that the engine water temperature indior needle fluctuates within a certain range. The reason is
The water temperature in the small cycle is inconsistent due to the lack of circulation. On the one hand, it leads to
The opening temperature of the thermostat increases, on the other hand, after the high temperature water flows out, the low temperature
The water quickly flows to the thermostat, causing the thermostat to close quickly. Under normal conditions
After warming up, the water temperature of the engine will remain at a relatively constant
level, approximately at 93°C.

3) The cooling water is reduced, the large circulation is not smooth, and the engine is high temperature:
At this point, the pump has been relatively serious damage. If you continue
Driving will directly lead to increased engine damage.

The five-star service we give you

1. We have advanced technoledge and 100% testing before delivery.

2. Quick delivery and competitive price.

3. The larger quantity you order, the better price and faster delivery we can supply.

4. We have a professional team to offer professional service for you.

5. We can offer used and new, oem, good quality, made in china parts to you.

6. The parts will give weight, price when quotation.

352-0205 Part Number Product alog

Aggregates comprising the spare part 2930818 PUMP GROUP-WATER

More related products you are looking for

 
 


FAQ
 

Q1. Which shipment can you supply?

A1: By sea, by air or by express(DHL, Fedex, TNT, EMS, UPS, etc).

Q2. What is your terms of packing?

A2: Generally, we pack our goods in neutral cartons or wooden boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting

your authorization letters.

Q3. What payments are available?

A3: T/T , Western Union, Trade assurance, L/C.

Q4. What is your terms of delivery?

A4: EXW, FOB, CFR, CIF.

Q5. How about your delivery time?

A5: Generally, it will take 1 to 3 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. What is your sample policy?

A6: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample fee and the courier cost.

Q7. Do you test all your goods before delivery?

A7: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

A8:1. We keep good quality and competitive price to ensure our customers benefit .

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q9: How can i trace my order?

A9: We'll send you the Bill of Lading or express tracking number once it comes out.