KOCENT OPTEC LIMITED
| Payment Terms | T/T, L/C |
| Supply Ability | 5,000pcs/week |
| Delivery Time | 5~14 working days |
| Packaging Details | Carton box, wooden pallet |
| Type | Inline type |
| Cable ports | 2 in 2 out |
| Cable diameter | 8.0~22.0mm |
| Min. capacity | 2 cores |
| Max capacity | 48 cores |
| Material | PPR, ABS, PC, PP |
| Brand Name | KCO, Kocent Optec Limited |
| Model Number | KCO-GJS22 |
| Certification | iSO9001, RoHS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Madidi 48 Cores 4 Cable Ports Fiber Optic Splice Closure Box Outdoor Water Proof
PC Material IP65 Fiber Optic Splice Closure KCO-H2295 Inline Type 2 In 2 Out
FTTH Drop Cable Fiber Optic Splice Closure For 1x8 Splitter KCO-GJS08 3 inlet 3
Outdoor Water Proof 96 Cores 2 In 2 Out Fiber Optic Splice Closure Madidi-ZT-Z13
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 5,000pcs/week |
| Delivery Time | 5~14 working days | Packaging Details | Carton box, wooden pallet |
| Type | Inline type | Cable ports | 2 in 2 out |
| Cable diameter | 8.0~22.0mm | Min. capacity | 2 cores |
| Max capacity | 48 cores | Material | PPR, ABS, PC, PP |
| Brand Name | KCO, Kocent Optec Limited | Model Number | KCO-GJS22 |
| Certification | iSO9001, RoHS | Place of Origin | Guangdong, China |
| High Light | fiber optic joint closure ，fibre optic splice closure | ||
FTTH Nap Outdoor 16Cores Fiber Optic Splitter Splice Closure Junction Box KCO-GJS22 PC+ABS
KCO-1608D Fiber optic splitter closure box is new design to sastify new FTTH demand. It can install 1 pc of 1*8 PLC splitter. Make by high quality PC material, life time is longer.
Features
- Can accommodate two 1x8 PLC splitter LGX module or steel tube type;
- Anti-ultraviolet,anti- impact and waterproof function;
- Unique flip board, flip angle ≥ 180 °, fusion area and distribution area is more obvious, reducing the cable crossing;
- Fiber optic cable can go in and out of the box without cut the cable.
Specification:
| Model | KCO-GJS22 |
| Dimension | 290*190*110mm |
| Cable diameter | Φ7-φ18mm |
| Cable port | 4pcs round ports 16pcs 2*3mm drop cable ports |
| Max. Split ratio | 2pcs 1x8 mini splitter |
| Max. Splice tray | 1pc |
| Max. Fusion splice | 24 cores |
Technical parameters:
- Optical fiber radius of curvature: ≥40mm
- Splice tray additional loss: ≤0.1dB
- Temperature range: -40°C ~ +60°C
- Anti side pressure: ≥2000N/10cm
- Impact resistance: ≥20N.m
- Waterproof level: IP65
Packing list:
| Main body | 1 set |
| L=400mm bare fiber buffer tube | 2 pcs |
| Hoop / clamp | 2 pcs |
| 3x100 nylon tie | 26 pcs |
| Heat shrinkable tube L=60mm | 2-72 pcs (configuration on demand) |
| User manual | 1pc |
Product pictures:
Installation way:
Characterictics:
| Characteristics | Value/Performance | Methods and Conditions |
| Mechanical | ||
| Air Tightness | No air bubble seen | Put closure under water for 15min with closure's internal air pressure set at 100kPa±5kPa. |
| Remains100kPa±5kPa | Measure the internal pressure 24 hours later | |
| Air Tightness after re-installation | No air bubble seen and pressure remains unchanged | Do re-entry and re-installation 3 times and repeat above Air Tightness Tests. |
Axial Pulling | Pressure remains unchanged | Pulling force: 1000N Time: 1min Internal air pressure: 60kPa±5kPa |
Compression | Pressure remains unchanged | Applied pressure: 2000N/100mm Time: 1min Internal air pressure: 60kPa±5kPa |
Impact | Pressure remains unchanged | Impact energy: 16N.m No. of impacts: 3 Internal air pressure: 60±5kPa |
Bending | Pressure remains unchanged | Bending angle±45°(in two opposite directions) Tension: 150N No. of bending: 10 Internal air pressure: 60kPa±5kPa |
Twisting | Pressure remains unchanged | Twisting angle: ±90° Torque: 50N No. of twisting: 10 Internal air pressure: 60kPa±5kPa |
| Thermal | ||
Temperature Cycling | Pressure drop ≤5kPa | Cycling range: -40 ~ +60°C Cycling time: 2hrs at -40°C, then 2hrs at +60°C No. of cycling: 3 Internal air pressure: 60kPa±5kPa |
| Electrical | ||
| Insulation | Resistance between metal parts:2.0x105MΩ | Soak closure into water in 1.5m-depth for 24hrs, and measure the insulation resistance after taking it out of water. |
| Resistance between each metal part and ground:2.0x105MΩ | ||
High Voltage | No voltage break-downs and sparks | Soak closure into water in 1.5m-depth for 24hrs, then apply 15kV DC to the metal parts inside |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2007
Total Annual:
4000000-5000000
Employee Number:
20~250
Ecer Certification：
Verified Supplier
KOCENT OPTEC LIMITED is a high-tech company that focus on passive and active fiber optic product series. Established in 2007, we have more than 15 years of experience in optical fiber accessories production. With strong R&D team and close quality process, we get more and more ... KOCENT OPTEC LIMITED is a high-tech company that focus on passive and active fiber optic product series. Established in 2007, we have more than 15 years of experience in optical fiber accessories production. With strong R&D team and close quality process, we get more and more ...
Get in touch with us
Leave a Message, we will call you back quickly!