KOCENT OPTEC LIMITED
| Payment Terms | T/T,L/C |
| Supply Ability | 5,000pcs/week |
| Delivery Time | 5~14 working days |
| Packaging Details | Carton box, wooden pallet |
| Type | Inline type |
| Cable ports | 2 in 2 out |
| Cable diameter | 8.0~22.0mm |
| Min. capacity | 2 cores |
| Max capacity | 48 cores |
| Material | PPR, ABS, PC, PP |
| Brand Name | KCO, Kocent Optec Limited |
| Model Number | KCO-GJS22 |
| Certification | iSO9001, RoHS |
| Place of Origin | Guangdong, China |
View Detail Information
Explore similar products
Madidi 48 Cores 4 Cable Ports Fiber Optic Splice Closure Box Outdoor Water Proof
PC Material IP65 Fiber Optic Splice Closure KCO-H2295 Inline Type 2 In 2 Out
FTTH Drop Cable Fiber Optic Splice Closure For 1x8 Splitter KCO-GJS08 3 inlet 3
Outdoor Water Proof 96 Cores 2 In 2 Out Fiber Optic Splice Closure Madidi-ZT-Z13
Product Specification
| Payment Terms | T/T,L/C | Supply Ability | 5,000pcs/week |
| Delivery Time | 5~14 working days | Packaging Details | Carton box, wooden pallet |
| Type | Inline type | Cable ports | 2 in 2 out |
| Cable diameter | 8.0~22.0mm | Min. capacity | 2 cores |
| Max capacity | 48 cores | Material | PPR, ABS, PC, PP |
| Brand Name | KCO, Kocent Optec Limited | Model Number | KCO-GJS22 |
| Certification | iSO9001, RoHS | Place of Origin | Guangdong, China |
| High Light | fiber optic splice enclosure ，fibre optic splice closure | ||
KCO-1608D splitter splice closure integrates distribution and splitting in one, can realize the direct fusion and branching of the optical cable, and is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection; the unique three-tier design of the box body can be used as a fiber splitter or splice box; the flip board can be flipped≥180°,it is more convenient to install the box or maintenance. If remove the board, it can bed as a splice closure to meet different choices.
| Model | KCO-GJS22-S | KCO-GJS22-F |
| Dimension (mm) | 290*190*110 | 290*190*90 |
| Cable diameter (mm) | Φ7-φ18 | Φ7-φ18 |
| Cable port | 4pcs round ports, 16pcs 2*3mm drop cable ports | 2in 2 out |
| Max. Split ratio | 2pcs 1x8 mini splitter | / |
| Max. Splice tray | 1pc | 3pcs |
| Max. Fusion splice | 24 cores | 72 cores |
| Main body | 1 set |
| L=400mm bare fiber buffer tube | 2 pcs |
| Hoop / clamp | 2 pcs |
| 3x100 nylon tie | 26 pcs |
| Heat shrinkable tube L=60mm | 2-72 pcs (configuration on demand) |
| User manual | 1pc |
| Mechanical | ||
| Air Tightness | No air bubble seen | Put closure under water for 15min with closure's internal air pressure set at 100kPa±5kPa. |
| Remains100kPa±5kPa | Measure the internal pressure 24 hours later | |
| Air Tightness after re-installation | No air bubble seen and pressure remains unchanged | Do re-entry and re-installation 3 times and repeat above Air Tightness Tests. |
| Axial Pulling | Pressure remains unchanged | Pulling force: 1000N Time: 1min Internal air pressure: 60kPa±5kPa |
| Compression | Pressure remains unchanged | Applied pressure: 2000N/100mm Time: 1min Internal air pressure: 60kPa±5kPa |
| Impact | Pressure remains unchanged | Impact energy: 16N.m No. of impacts: 3 Internal air pressure: 60±5kPa |
| Bending | Pressure remains unchanged | Bending angle±45°(in two opposite directions) Tension: 150N No. of bending: 10 Internal air pressure: 60kPa±5kPa |
| Twisting | Pressure remains unchanged | Twisting angle: ±90° Torque: 50N No. of twisting: 10 Internal air pressure: 60kPa±5kPa |
| Thermal | ||
| Temperature Cycling | Pressure drop ≤5kPa | Cycling range: -40 ~ +60°C Time: 2hrs at -40°C, then 2hrs at +60°C No. of cycling: 3 Internal air pressure: 60kPa±5kPa |
| Electrical | ||
| Insulation | Resistance between metal parts:2.0x105MΩ |
Soak closure into water in 1.5m-depth for 24hrs, and measure the insulation resistance after taking it out of water. |
| Resistance between each metal part and ground:2.0x105MΩ | ||
| High Voltage | No voltage break-downs and sparks | Soak closure into water in 1.5m-depth for 24hrs, then apply 15kV DC to the metal parts inside |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company
Year Established:
2007
Total Annual:
4000000-5000000
Employee Number:
20~250
Ecer Certification：
Verified Supplier
.gtr-container-f7h2k9 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; } .gtr-container-f7h2k9 p { margin-bottom: 1em; text-align: left !important; font-size: 14p... .gtr-container-f7h2k9 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; line-height: 1.6; padding: 15px; box-sizing: border-box; } .gtr-container-f7h2k9 p { margin-bottom: 1em; text-align: left !important; font-size: 14p...
Get in touch with us
Leave a Message, we will call you back quickly!