Waterproof 12fo 24fo 48fo Optical Fibre Splice Joint Enclosure Box

• Fiber Optic Splice Closures is used for protective connection of two or multiple optical cable and optic fiber distribution.
• It is one of commonly used equipment of user access point.
• This FOSC has 4 cable ports, can do 2 input and 2 output.
• Each cable port can throught diameter 8.0mm to 18.0mm of cable.
• Used for the outdoor connection between optical distribution cable and optical inroom cable.
• KCO-H0448-OF optical fiber splice closure box is design for outdoor application.
• It is suitable for wall-mounting, aerial, pole-mounting, especially used for FTTH fiber distribution.

• Up-down bisection, horizontal type
• 2inlet/outlet
• 48cores max. capacity
• Slide-in-lock design, over 90 opening angle tray
• Elastic integrated seal ensure tightening fit
• Housing provide fire resistant, waterproof, and quakeproof for splices while handing
• Great aging resistant ability
• High mechanical performance
• Excellent sealing performance
• High-strength engineering plastic shell
• Does not require special tools, easy to install and open the duplicate.
• Endure harsh conditions such as vibration, impact, tensile cable distortion and strong temperature changes

• Telecom project
• CATV networks
• Local area networks
• Telecommunication networks
• Data communications networks
• Widely used in FTTH access network
• Aerial, Direct buried, underground, pipeline, hand-holes, duct mountig, wall mounting.

• Stretch: the box body inflated after sealing 60KPa ± 5Kpa, can withstand 1000N axial tension, to maintain 1 min, no change in air pressure;
• Flattening: The box body is sealed and inflated at 60KPa ± 5Kpa, and it can bear the horizontal uniform pressure of 2000N / 10cm. The pipe can withstand 600N / 10cm without change of air pressure.
• Hit: the box after sealing inflatable 60KPa ± 5Kpa, in the box above the 1.6 drop 1 kg steel ball, the impact of three times, the box does not crack, pressure no change;
• Bending: the box after sealing inflatable 60KPa ± 5Kpa, tension load 150N, bending angle ± 45°, 10 cycles, no change in air pressure;
• Reverse: the box after sealing inflatable 60KPa ± 5KPa, torque 50N.m, torsion angle +90°, 10 cycles, no change in air pressure;
• Sealing performance: gas pressure 100kPa ± 5kPa, water bath soak 1 5min, no bubbles to escape, no change after 24hr pressure;
• Insulation resistance: water depth 1.5m, soak 24hr, the insulation resistance ≥ 2 * 104MΩ;
• Resistance to voltage intensity: water depth 1.5m, soak 24hr, 15KV DC 1min without breakdown, no arcing phenomenon;
• High temperature test: the box after sealing inflated 60kPa ± 5kPa, at + 60 ℃ for 2hr, the box without deformation, no leakage;
• Low-temperature test: box sealed inflatable 60kPa ± 5kPa. The temperature at -40 ℃ for 2hr, the box without deformation, no leakage;
• Temperature cycle test: the box after sealing inflatable 60kPa ± 5kPa. -40 ℃ each point constant temperature 2hr, three cycles, the pressure drop amplitude ≤ 5kPa.

If you want to show your own brand LOGO on the goods such as cable, package bag, label or any where. Our OEM and ODM service is always ready to do it. Please contact with our sales team to get best support.

• According to Stardard Export Packing.
• Carton box, wooden box, wooden pallet.

• International express such as UPS, TNT, DHL, etc
• Internatioal air: CA, AA, EA, etc
• By sea
• Standard export sea port: Shenzhen, Hongkong, Ningbo
• Standard export airport: Shenzhen, Hongkong, Hangzhou, Shanghai