115-043912-00 Patient Monitor Module Mindray N series T Series Co2 Sidestream

Product Specification

Hospital Medical Equipment Module Mindray N series T Series Co2 Sidestream Module 115-043912-00

► Brief Introduction

The Sidestream measurement sample was exhaled from the P airway at a constant sample flow and analyzed using a CO2 sensor built into the CO2 module. For use with Mindray BeneVision N Series / BeneVision T Series
CO2 monitoring is a continuous, non-invasive technique that measures the absorption of infrared (IR) light at specific wavelengths to determine the concentration of CO2 in a patient's body. CO2 has its own absorption carbon, and the amount of light passing through the gas probe depends on the concentration of CO2 being measured. When a sp IR light passes through a breathing gas sample, part of the IR light will be absorbed by the CO2 molecule. The amount of T transmitted by infrared light passing through a breathable gas sample is measured by a PHiliphhilipoto detector. From the measured IR light, the concentration of CO2 was calculated.

► Measurement provided
1. The CO2 waveform
2. End-expiratory CO2 value (EtCO2) : The CO2 value measured at the end of the expiratory PHiliphhilipase.
3. Inhaled CO2 fraction (FiCO2) : The minimum CO2 measured during inhalation.
4. Airway respiration rate (awRR) : Respiration rate per minute, calculated according to CO2 waveform.

► Using a Sidestream CO2 Module
1. Connect the water collector to the module, and then connect the CO2 component.
2. By default, the side-flow CO2 module is in measurement mode. After the CO2 module is inserted, the "CO2 start" message appears on the screen.
3. After startup, it takes some time for the CO2 module to warm up to the operating temperature. Display message [CO2 sensor warm-up]. If CO2 measurements are performed during warm-up, measurement accuracy may be affected
4. After preheating, you can take a CO2 measurement.

► Identifying CO2 Modules

► Delivery Details

As for delivery time, we will do our best to process the order and ship the goods as soon as possible. Please be patient and keep in touch with us. Generally speaking, most orders will be shipped within 3 to 5 working days and arrive on time. However, on busy days, shipment may be delayed by more than 5 working days. If you are in urgent need of your product, please be sure to confirm with us before placing your order. In order to ensure the smooth operation of the business, please pay special attention and carefully arrange the time according to your personal needs. If your order is taking longer than expected, or you would like to know exactly when it will arrive, please feel free to contact us. We are always here to help you.

► After-Sales Guarantee

Please note that both new and used medical machines are dispatched for at least 90 days of warranty period, they are not allowed to leave the workshop completely before our engineers will test each machine with the most care and unit to ensure that they are 100% effective equipment. Of course, we are confident that you will be satisfied with our products and services. But if you are not, please contact us as soon as possible if you find any problems. Our ultimate goal is to strive to develop and sell the best products to customers all over the world. Customer satisfaction is our biggest pursuit.

► Matters Need Attention

To avoid causing unnecessary trouble, please read the following content carefully.
Please look through all the pictures before placing your order to make sure that the product is what you want, as they are also an important part of the product description. In addition, the buyer is responsible for paying all customs charges, including all taxes and fees. Therefore, you must ensure that the equipment you ordered can be imported into your country. Once the packing leaves our factory, the shipper will not be responsible for any delay. So remember to check all relevant information before placing your order.

► Quality Guarantee

"Quality assurance" is our eternal pursuit and promise. We have a professional division of labor, a highly cooperative team, and a strong technical force in medical device development. Our expert team provides fast and reliable solutions for the sales and maintenance of patient monitors, defibrillators, ECG/ECG machines and other accessories or repair parts. We have always focused on producing quality products and providing first-class customer service. It is important to note that there are brand new and second-hand products for sale. Please distinguish them carefully when placing an order. Otherwise it will cause unnecessary trouble. If you have any questions about product quality, please contact us. We will get back to you as soon as possible.

► Some Other Services

As an experienced medical device industry expert, Apart from specializing in selling medical devices, accessories and repair parts such as patient monitor, defibrillator machine, patient monitor printer, ECG machine, EKG machine, main board, batteries and so on, we also engage in providing medical equipments or modules repair service. So if you have any that sort of machine or modules which in need of repair, please feel free to contact us at any time. Moreover, what need to pay attention to is that you have to make sure the repair item is unopened and has never been repaired before. And items lack of component is unacceptable. Accordingly, check out your item before shipping.

Thank you for your time! If you have other questions about our Mindray N series T Series Co2 Sidestream Module 115-043912-00, please feel free to contact us. We are always ready to serve you.