Payment Terms | T/T, Western Union,PayPal |
Delivery Time | 3-5 working days |
Product name | Dash |
Type | Dash3000 Dash4000 Dash5000 |
Application | medical equipment,ICU,hospital device |
Warranty | 90days |
Major material | Plastic, PCB ,etc |
Key Word | speaker |
Apply For | Patient Monitor |
Product Edge | Professional technical team |
Stock | Sufficient stock |
Product State | Working Fine |
Line Voltage | 100 to 240 V |
Current | 1.3 to 0.5 A |
Frequency | 50/60 Hz |
Relative humidity | 5 to 95% at 40°C |
Ambient temperature: | 0 to 40°C (32 to 104°F) |
While charging batteries: | 0 to 35°C (32 to 95°F) |
Capnostat III sensor | 10° to 40° C (50° to 104°F) |
Altitude: | -610 to 4, 570 m (-2,000 to 15,000 ft) |
Brand Name | GE |
Model Number | Dash3000 Dash4000 Dash5000 |
View Detail Information
Explore similar products
Patient Monitor Accessories Goldway UT4000 Monitor Blood Pressure Plate Great
Mindray PM7000 Patient Monitor Accessories Keyboard Silicone 7000-20-24395
Well-chosen Patient Monitor Mainboard Goldway G30 40 60 70 80 UT4000B UT6000
Patient Monitor Repair Parts GE Dash4000 Patient Monitor Flat Cable in ready
Product Specification
Payment Terms | T/T, Western Union,PayPal | Delivery Time | 3-5 working days |
Product name | Dash | Type | Dash3000 Dash4000 Dash5000 |
Application | medical equipment,ICU,hospital device | Warranty | 90days |
Major material | Plastic, PCB ,etc | Key Word | speaker |
Apply For | Patient Monitor | Product Edge | Professional technical team |
Stock | Sufficient stock | Product State | Working Fine |
Line Voltage | 100 to 240 V | Current | 1.3 to 0.5 A |
Frequency | 50/60 Hz | Relative humidity | 5 to 95% at 40°C |
Ambient temperature: | 0 to 40°C (32 to 104°F) | While charging batteries: | 0 to 35°C (32 to 95°F) |
Capnostat III sensor | 10° to 40° C (50° to 104°F) | Altitude: | -610 to 4, 570 m (-2,000 to 15,000 ft) |
Brand Name | GE | Model Number | Dash3000 Dash4000 Dash5000 |
High Light | Dash5000 Patient Monitor Parts ,GE Dash3000 Patient Monitor Parts ,419483-003 Patient Monitor Speaker |
GE Dash3000 Dash4000 Dash5000 patient monitor speaker 419483-003
► Brief Introduction
The speaker is used for audible notification of alarms.
This internal speaker provides sound for audible alarms. For batter sound quality do not block speaker.
Audio tones are generated using a tone generator, an audio amplifier, and an 8Ω, 2.5-in. Speaker. The tone generator have built in D/A converters and a mixer to generate the dual frequency tones.
Frequencies ranging from 150 Hz to 2800 Hz are produced.
► Replace speaker assembly
1. Remove the DAS assembly.
2. Remove the writer assembly/writer flex.
3. Remove the writer bracket from the frame by squeezing the sides together.
4. Disconnect the speaker cable connector from the processor board.
5. Remove the four screw anchoring the speaker to the frame. Remove the speaker from the unit.
6. Install the new speaker in the unit.
7. Fasten the speaker with the four screws.
8. Connect the speaker cable connector the processor board.
9. Reassemble the patient monitor in reverse order.
NOTE:
When securing the thumb screw on the writer flex, first finger tighten the thumb screw, Then, use a flat-head screw driver to tighten the screw an additional 1/4 turn.
► Speaker Test
1. Change the alarm volume of the patient monitor to 100%
2. Verify the speaker volume of the patient monitor changes accordingly.
3. Return the volume of the patient monitor to the level it was previously set to, before you changed it for this test.
► Environmental Specifications
Operating conditions: | |
Ambient temperature: | 0 to 40°C (32 to 104°F) |
While charging batteries: | 0 to 35°C (32 to 95°F) |
Capnostat III sensor | 10° to 40° C (50° to 104°F) |
Relative humidity: | 5 to 95% at 40°C |
Vibration: | MIL-STD 810E, Method 514.4, Category 1 |
Altitude: | -610 to 4, 570 m (-2,000 to 15,000 ft) |
Storage conditions: | |
Maximum: | 70°C (158°F) at 95% relative humidity |
Minimum: | –40°C (–40°F) at 15% relative humidity |
CO2 Sensor: | –30 to 65°C (–22 to 149°F) |
Batteries: | –20 to 60°C (–4 to 140°F) |
► Contact us
In order to successfully conclude the transaction, please contact us in time if you have any questions. If you want to know more information about our company or products, or if you are unclear about our warranty period, or if you have any good suggestions for our products and services, you can contact us to raise them. In short, as long as you need us, we are happy to answer you. Thank you for your cooperation. Looking forward to establishing a long-term good cooperative relationship with you.
All through the way we seek for providing perfect service to the satisfaction of customers. Any inquiry of GE Dash3000 Dash4000 Dash5000 patient monitor speaker 419483-003 will be highly appreciated and thanks for your support. If you have any questions, please feel free to contact us at any time, we are glad to answer them.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification:
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!