Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly

Product Specification

Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly

Introduction of Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly

The Nihon Kohden TEC-5602 Defibrillator Hook Support Plate Assembly is a replacement part for the Nihon Kohden TEC-5602 Defibrillator. Includes a support plate with hook to attach the defibrillator to a mounting bracket or cart for easy access and storage.

The set is made from durable materials to ensure long-lasting performance and reliability. It is easy to install and compatible with the Nihon Kohden TEC-5602 defibrillator, providing a safe and convenient way to store and access the device in a medical environment.

It is important to periodically inspect and replace any damaged or worn parts of medical equipment to maintain optimal operation and safety. The Nihon Kohden TEC-5602 Defibrillator Hook Support Plate Assembly is an essential component to ensure proper operation of the defibrillator and effective use in emergency situations.

Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly Specification

General operating precautions of Nihon Kohden TEC-5602 Defibrillator

1. To use the instrument safely and effectively, you must fully understand its operation.

2. When installing or storing the instrument, take the following precautions:

(1) Avoid moisture or contact with water, extreme atmospheric pressure, excessive humidity and temperature, poorly ventilated areas, and dusty, salty or sulfuric acid air.

(2) Place the instrument on a flat ground. Avoid vibrations and mechanical shocks, even during transportation.

(3) Avoid placing it in areas where chemicals are stored or where there is a risk of gas leakage.

(4) The frequency and voltage of the power cord source to be applied to the instrument must meet the product specifications and have sufficient current capacity.

(5) Select a room with adequate grounding facilities.

3. Before the operation

(1) Verify that the instrument is in perfect working order.

(2) Check that the instrument is properly grounded.

(3) Check that all cables are connected correctly.

(4) When the instrument is used in combination with other instruments, take special care to avoid misdiagnosis or other problems.

(5) All circuits used for direct connection to the patient must be carefully checked.

(6) When using a battery-operated model, check that the battery charge is acceptable and the battery condition is good.

4. During operation

(1) Maintain constant and careful monitoring of the instrument and the patient.

(2) Turn off the power or remove electrodes and/or sensors as necessary to ensure patient safety.

(3) Avoid direct contact between the instrument case and the patient.

5. Turn off after use

(1) Turn off the power and return all controls to their original positions. (2) Gently disconnect the cables; do not disconnect them forcefully.

(3) Clean the instrument and all its accessories for next use.

Thank you so much for your attention.If you're interested in  Nihon Kohden TEC-5602 Defibrillator Hook Bracket Plate Assembly,feel free to contact us .Thank you .