China World Technology Medical Equipment Service Group
| Payment Terms | Full before shipment |
| Delivery Time | 3-5 working days |
| Packaging Details | Canton |
| Product Name | PHiliph MRX M3535A Defibrillator Louder speaker and Microphone Assembly |
| Brand | PHiliph |
| Application | PHiliph MRX M3535A Defibrillator |
| Condition | Used |
| MOQ | One piece |
| Warranty | 90 days |
| Material | Plastic |
| Color | Black |
| Payment Method | T/T ,Western Union ,Paypal ,Alibaba ,eBay |
| Brand Name | PHiliph |
| Model Number | MRX M3535A |
View Detail Information
Explore similar products
REF 4-07-0001 Lithium MnO2 Battery 12V 2,8Ah for defibrillator Fred Easy
Hospital Defibrillator Machine Parts 100-240V Power Supply
Cubtm102A Switching Module Power Supply Battery For CU Lifegain Cu-HD1 Medical
PHiliph Adult AED Electrode Pads M5071A-ABA M5066A HS1 AED Electrode Pads
Product Specification
| Payment Terms | Full before shipment | Delivery Time | 3-5 working days |
| Packaging Details | Canton | Product Name | PHiliph MRX M3535A Defibrillator Louder speaker and Microphone Assembly |
| Brand | PHiliph | Application | PHiliph MRX M3535A Defibrillator |
| Condition | Used | MOQ | One piece |
| Warranty | 90 days | Material | Plastic |
| Color | Black | Payment Method | T/T ,Western Union ,Paypal ,Alibaba ,eBay |
| Brand Name | PHiliph | Model Number | MRX M3535A |
| High Light | PHiliph MRX M3535A Defibrillator Microphone Assembly ，PHiliph MRX M3535A Defibrillator Louder speaker | ||
PHiliphh MRX M3535A Defibrillator Louder speaker and Microphone Assembly
► Audio Problems
| Symptom | Possible Causes | Suggested Solution |
| No audio at all. | • Speaker failure. • Processor PCA failure. | • Check speaker connections. •Replace speaker/microphone assembly • Replace Processor PCA.
|
| Audio is distorted. | • Damage to speaker cover. • Speaker damage or failure. • Processor PCA failure. | • Replace speaker label • Replace speaker/microphone assembly • Replace Processor PCA. |
| Buzzing noise when audio active. | • Damage to speaker label. • Debris between speaker and speaker label. • Speaker hardware loose. • Speaker failure. • Processor PCA failure. | • Replace speaker label. • Remove speaker label, clean out debris, install new speaker label. If debris is behind plastic housing, remove speaker, clean, and replace speaker. • Tighten hardware as needed. • Replace speaker/microphone assembly. • Replace Processor PCA. |
| Tones present but no voice prompt (in AED Mode). | • Software error or failed localization upgrade. • Processor PCA failure | • Reload the language. • Replace Processor PCA. |
| Voice prompt present but no tones. | Processor PCA failure | • Replace Processor PCA. |
► Speaker and Microphone Assembly
The speaker and microphone assembly can be removed without removing any other assembly from the front enclosure.
► Preparation
1. Open the enclosure and remove it.
2. Secure the front enclosure
Place the front cover on the work surface with the display facing down and the printer in the lower left corner.
► Removal
1. Disconnect the speaker and microphone from the PCA. Disconnect the four-wire connector by pulling it upward (1).
2. Remove the screw. Loosen and remove the T-10 screw securing the plastic cover and bracket to the chassis.
3. Remove the shield and bracket. Lift the shield and place it upward (2).
4. Note the position of each speaker, microphone, and cables. The speaker is diagonally forward of the speaker bracket. The microphone fits into a well-formed recess in the enclosure.
5. Remove the speaker and microphone. No one has anything to do with this case; just take them both.
► Replacement
1. Install the speakers and microphone.
To. Place the speaker connectors on the bottom. There are two ribs on the bottom of the speaker stand; the speaker sits on top of the ribs.
B. Place the microphone in the slot. Align the microphone cable with the notch in the slot.
2. Attach the protector and bracket. Make sure the red-black 4-wire harness and the white 2-wire harness go under the bracket.
3. Replace and tighten the screws.
4. Connect the speaker/microphone assembly. Connect the four-wire connector to the processor PCA.
5. Close the case.
Thank you so much for your attention .If you're interested in PHiliphh MRX M3535A Defibrillator Louder speaker and Microphone Assembly ,feel freet to contact us .Thank you .
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2015
Employee Number:
20~50
Ecer Certification：
Verified Supplier
China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te... China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-te...
Get in touch with us
Leave a Message, we will call you back quickly!