Rogers Duroid 5880 RF Microwave PCB 0.787mm Immersion Gold

Best Rogers duroid 5880/5870 substrate PCB material 

Specification:

Board size: 26*16 cm

Board thickness: 0.787mm

Copper foil: 35UM

Surface: Immersion gold

Material:rogers 5880 0.787mm

Min line width: 6mil

Min hole: 0.4mm

Withour solder mask and silkscreen

Note:Cause rogers 5880 material is glass microfi ber reinforced PTFE,so it is easy contractively,so the min line and hole can’t be small,3mil line or 0.15mm hole,it’s difficult to attach.

Customer questions:

Ask:

I have designed power divider in Rogers RT 5880 substrate
Now I want to find the substrate for fabrication. Can you help me to quote for us and prototype?

Dielectric constant =2.2
Substrate Thickness=0.787mm
Conductor thickness =0.018mm

Answer:

Yes,please kindly provide us gerber file and relevant requirements,we will ask our engineer check file carefully and quote you

Ask:

RT5880 material is so expensive, it is exceed our budget, I wish to know whether i can use any other substrate in place of it and obtain similar results?

Answer:

You can try Arlon Diclad880 or Taconic TLY-5 or Nelco NY9220, Check if they are available with the thickness you need.

Price from high to low: rogers5880→taconic TLY-5→nelco NY9220→arlon Diclad880

Choosing high frequency pcb material :

Selecting a circuit material for a high-frequency printed-circuit board(pcb) is generally a trade-off,often between price and performance. However, PCB materials are also selected by two key factors: how well they meet the needs of an end-use application and what kind of efforts is required to fabricate a desired circuit with a particular material.
These two factors may not mesh:one material may be well suited for a particular application but may pose challenges in terms of circuit fabrication,and vice verse.There is no foolproof,step by step procedure for selecting a PCB material.But by relying on some tangible guildelines designed to evaluate a material in terms of its suitability for circuit fabrication and for meeting the requirements of an application,the process of selecting a PCB for a particaular application can be simplied.

Low dielectric high-frequency multilayer rogers pcb ,improve the rogers 5880 pcb 's conductivity and the high quality make the customer save more costs .

High frequency PCBs with aluminum heat sink for telecommunication and aerospace industries using customer specific electrically and thermally conductive bonding films. Microwave PCB’s: Oneseine has enormous experience and technical expertise in the manufacturing of time critical, high technology RF circuits. The company works closely with its worldwide customers to deliver prototype-to-large volume manufacturing of circuits. During this process our engineering staff discusses with the customers’ staff to come up with the optimized designs for high quality, low cost and speedy delivery.

Welcome to send us email

Rogers PCB applications.

Moreover, since nowadays 5G Technology developments are growing quickly, various devices request high-frequency PCBs and RF PCBs with high performance which need not only low electrical noise but also low signal losses. And Rogers PCB material is a perfect choice to match the technological characteristics, besides it is also cost-effective for this purpose. Some Rogers PCB applications are:

1 .Automotive Radar and Sensors
2. Microwave equipment of all kinds.
3. Cellular Base Station Antennas
4. RF Identification (RFID) Tags
5. 5G Station
6. Microwave point to point (P2P) links
7. LNB’s for Direct Broadcast Satellites