Winsmart Electronic Co.,Ltd
| Payment Terms | T/T, L/C, Western Union |
| Supply Ability | 100 Sets/Month |
| Delivery Time | 5-10 days |
| Packaging Details | Plywood case |
| Spindle | Optional |
| Advantage | Low cost |
| Cutting Precision | ±0.05mm |
| Max PCB Size | 300x400mm |
| Routing Bit | left-hand |
| Cutting Speed | 1-100mm/s |
| Vacuum Cleaner | Yes |
| Product Name | PCB Depanel Machine |
| Brand Name | Winsmart |
| Model Number | SMTR288 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Precision 0.02mm PCB Depaneling Router Machine Cutting Tab and V-cut Boards
Desktop 40000rpm Mini PCB Depaneling Router Machine PCB Depaneler
Stand Alone PCB Depaneling Router Machine Wind Cooling With Two Tables
Dia 0.8mm Routing Bit PCB Router Machine , PCB Cutting Machine 0.01mm Repeatabil
Product Specification
| Payment Terms | T/T, L/C, Western Union | Supply Ability | 100 Sets/Month |
| Delivery Time | 5-10 days | Packaging Details | Plywood case |
| Spindle | Optional | Advantage | Low cost |
| Cutting Precision | ±0.05mm | Max PCB Size | 300x400mm |
| Routing Bit | left-hand | Cutting Speed | 1-100mm/s |
| Vacuum Cleaner | Yes | Product Name | PCB Depanel Machine |
| Brand Name | Winsmart | Model Number | SMTR288 |
| Certification | CE | Place of Origin | China |
| High Light | Rotary Tables PCB Depaneling Machine ，Manual Feeding PCB Depaneling Machine ，380V PCB Router Machine | ||
PCB Depanel Machine Rotable Tables PCB Router For High Volume Boards
PCB Router Specification:
| Model Number | SMTR288 |
| Machine Size | 1000(L) x 1244(W) x 1400(H)mm |
| Voltage | 380V/50Hz, 3.5KW |
| Max PCB Size | 300x400mm |
| PCB Thickness | 0.4-6mm |
| Feeding Mode | Manual |
| PCB Positioning | Customized fixture |
| Programming | Vision teaching, inline programming |
| Cutting Spindle | SycoTec 60000rpm/min(standard) |
| Cooling Type | Self cooling |
| Dust Collection Mode | Bottom collection |
| Cutting Speed | 1-100mm/s |
| Cutting Accuracy | ±0.01mm |
| Routing Bit | 0.8-3.0 Diameter, left rotation |
| Repeat Accuracy | ±0.02mm |
| Vacuum Cleaner Size | 625(L) x 600(W) x 1160(H)mm |
| Vacuum Cleaner Power | 3HP, 2.2KW |
| Vacuum Cleaner Weight | 130kgs |
| Active Protective Function | Safety light curtain |
| Security Door | Manual door |
| Programming Method | Camera assisted teaching |
PCB Router Features:
1. Full electronic control, no air request
2. High stability, easy maintenance
3. Simple operation, short changeover time
4. Design for small and middle size PCBA
5. Rotary working tables
Warranty Period and Service Scope:
The equipment has been debugged and checked before leaving the factory, and the company will guarantee its use within the following conditions.
1. Warranty period
One year after leaving the factory, the main shaft runs 3500 hours.
2. Service scope
During the warranty period, the company will repair the fault free of charge, but the following conditions will not be covered by the warranty.
Suggestion: please check the instruction manual or contact our company if you encounter any problem that you don't understand in the actual process
Environment setting
1. The equipment should be installed in a ventilated and dry place. Do not install it in a place that is easy to corrode or flammable.
2. The equipment should not be installed in places exposed to sunlight and high heat.
3. Do not place the equipment in the place with strong vibration and easy collision.
Mechanical installation
1. Place the equipment in the designated position.
2. Adjust the level of the equipment with a level instrument, and then tighten the foot cup screw.
3. Connect the hose of the dust collector to the dust collecting port of the equipment.
4. Connect the power plug of the dust collector with the equipment to confirm the operation direction and dust collection effect. If it is reversed, replace any two of the three power lines.
5. Grounding requirements: please connect the equipment to the ground wire of distribution box separately, and do not connect with other equipment in series.
Power supply configuration
1. The standard input of the equipment is single-phase 220 V AC.
2. The equipment input 3-phase 380V AC needs to be equipped with transformer.
PCB Router Packaging:
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Total Annual:
400,000.00-500,000.00
Employee Number:
40~60
Ecer Certification：
Verified Supplier
Factory established in 2005, has built and maintained its reputation as a source of technical and professional excellence. Winsmart has a driven, experienced, and knowledgeable team, providing extensive array of solutions for PCB depaneling and soldering. Above all, it takes pride i... Factory established in 2005, has built and maintained its reputation as a source of technical and professional excellence. Winsmart has a driven, experienced, and knowledgeable team, providing extensive array of solutions for PCB depaneling and soldering. Above all, it takes pride i...
Get in touch with us
Leave a Message, we will call you back quickly!