High Precision PCB Depaneling Equipment with Automatic Board Separation

Product Specification

High Precision PCB Depaneling Equipment with Automatic Board Separation Technology
 
Introduction

This machine(HS-300) is the blade moving PCB separator, using upper circular and down linear blade design,before cutting, put the v-groove onto the linear blade,the upper circular blade moving to finish spearating, the force stress is relative low, the board don't need move will protect the components on the board, avoid damaging.

Automatic board separation function
The equipment adopts automatic board separation technology, which can quickly and accurately cut the whole PCB into individual PCB panels.
By dividing the board by the robot arm and the blade, the efficiency of board separation and production efficiency are greatly improved.

Flexible size adaptability
It can be quickly adjusted according to the size of the PCB board, suitable for PCB boards of various specifications.
The maximum board separation size supported is 600mm×400mm, covering most SMT production needs.

High-precision board separation
The high-precision board separation mechanism and positioning system are adopted to ensure that the accuracy of each board separation is as high as ±0.1mm.
It can effectively avoid damage or burrs to the PCB board during the segmentation process.

Safe and reliable design
The equipment is equipped with safety protection devices, such as emergency stop buttons, etc., which improves the safety of operation.
The fully enclosed design avoids the splashing of debris during the cutting process.

Easy to operate
The equipment is equipped with a touch screen control panel, which can easily set the board separation parameters and monitor the board separation process.
The degree of automation is high, and the operator only needs to simply load the PCB board to complete the board separation.

Features

1, This machine can use for cutting all kinds of boards with v-slot.

2, Durable blade design, balde can be shaped at least twice.

3, Circular blade height can be adjusted to fit the different kinds of PCB with different height components.

4, Blade moving operation,relative low force stress,single motor control the balde, easy and conovenient operation.

5, With induction function, the machine will stop operation if the operator touch the space of balde moving.

6, Security, with double protective device,no need worry about the security production problem.

7, Durable, using high quality good material blade.

Working Principle

Feeding Mechanism
The PCB depaneling machine will first feed the whole board after SMT mounting into the depaneling machine.
The feeding mechanism uses a conveyor belt or a manipulator to feed the PCB board into the depaneling station.

Positioning and fixing
The depaneling machine fixes the PCB board by means of positioning pins or vacuum adsorption to ensure its accurate position.

Cutting Mechanism
The core component of the depaneling machine is the cutting mechanism, which is usually composed of a high-speed rotating cutting blade.
The cutting blade will quickly and accurately cut the PCB board along the preset dividing line.

Collecting depaneling
After cutting, the depaneling machine automatically collects the separated single PCB boards.
These depanels can be further tested, assembled and other processes.

Automated Control
The entire depaneling process is fully automated by the robot control system.
The control system can accurately control the cutting process according to the size and dividing line position of different PCB boards.

Specification

About Packaging