Restaurant Crystal Candle Chandelier Warm Candle Bulbs Brass Frame Dining Room

This restaurant crystal candle chandelier is engineered around the practical realities of a dining room: low ceilings, airborne cooking grease, and the need to feel intimate at seven in the evening without turning dark at lunch. The frame is deliberately open, with arms spaced so a cloth can pass between them during nightly cleaning, and the finish is a baked brass lacquer that resists the dulling that plated surfaces suffer in kitchen-adjacent rooms. Candle lamps run at 2700K with a low-glare diffuser ring above each holder, so guests seated beneath the fixture are not staring into a bare bright source. Everything hangs from a 500mm shallow profile for ceilings between 2.6 and 3.2 metres, and the dimmable circuit drops to five percent for late service, when the room needs to feel smaller and quieter.

• Open Cleaning Layout: Arms are spaced so a cloth can pass between them, letting staff dust the fixture during nightly close-down without removing crystal or using ladders in service areas.
• Baked Brass Lacquer: A heat-cured lacquer over brass resists the dulling and tackiness that plated finishes develop in dining rooms where cooking grease reaches the ceiling.
• Low-Glare Candle Holders: A diffuser ring above each candle lamp blocks direct view of the source, so guests seated under the fixture are not exposed to a bare bright point.
• Shallow 500mm Profile: A shallow overall depth suits dining rooms with ceilings between 2.6 and 3.2 metres, keeping sight lines open across the floor to the bar and kitchen pass.
• Late Service Dimming: Five percent dimming lets the room shift from a bright lunch service to an intimate late dinner without changing lamps or adding separate circuits.
• Warm Candle Colour: 2700K lamps with CRI above 85 keep plated food, wine and wood finishes looking correct — an important detail for restaurants photographing their menu.

Designed for restaurant dining rooms, private dining suites, wine rooms and brasserie interiors with moderate ceiling heights. The shallow profile and open arm layout also suit hotel breakfast rooms and club dining areas where the fixture must sit above tables without blocking conversation or service sight lines. Multiple smaller units are commonly specified along a banquette run, hanging over tables in a line, which lets a long dining room read as a series of intimate bays rather than one large space.

We work from the floor plan and table layout, then propose diameters, hang spacing and drop height for each row. A reflected ceiling drawing shows anchor positions relative to tables and service routes. Custom options include bronze and matte black finishes for industrial schemes, a two-tone frame, crystal-free versions for minimal interiors, and a central dimming module that lets a restaurant control a whole row of fixtures from one wall plate.

Each chandelier ships in a compact carton with foam-blocked arms and a separate crystal tray. Protective film stays on the finish until the room is decorated. Hardware is bagged and labelled, and an assembly card shows the arm sequence. Because restaurant projects often install in phases, cartons are sized to fit through standard service doors and can be stored in a back-of-house area before hanging.

Lead time is 18 to 25 days for standard sizes, with express production available for refurbishment deadlines. Replacement candle sleeves and diffuser rings are stocked, a six percent crystal allowance is included, and we supply a cleaning and re-lacquering guide for housekeeping teams. Multi-unit orders ship together on consolidated pallets to reduce freight cost and simplify site storage.