8 Light Crystal Candle Chandelier E14 Brass Arms Clear Crystal Drops Dining

The eight light crystal candle chandelier is the workhorse size in the candle family: big enough to light a dining table for eight, small enough to hang in a room with a standard two point nine metre ceiling. The extra two arms over the six light version change the light distribution more than the raw wattage suggests, because the wider spread reaches the ends of a long table instead of concentrating output in the middle. Brass arms are tube formed and hand polished, carrying clear crystal drops on graduated lengths so the silhouette narrows toward the bottom. The hub houses a single dimmable driver with a service cover, so an electrician can reach the terminal block from below without dismantling the crystal.

• Eight Arm Even Spread: Eight arms across a 700mm hub reach the ends of a long dining table, avoiding the dim corners that six light fixtures leave at either end of a table for eight
• Graduated Clear Crystal: Drops hang on progressively longer wires toward the centre, narrowing the silhouette and concentrating tighter sparkle where guests look across the table
• Service Cover Hub: The driver and terminal block sit behind a removable cover in the hub, so maintenance is done from a step ladder without removing a single crystal drop
• Hand Polished Brass Arms: Tube formed arms are polished by hand before plating, removing tool marks that show under candle light and giving a smooth reflective curve on every arm
• Phase Cut Dimming: A single dimmable driver covers five to one hundred percent output, working with standard trailing edge wall dimmers already installed in most dining rooms
• Rod or Chain Suspension: Suspension can be specified as a rigid rod for a fixed drop or a chain for sloped ceilings, both rated and supplied with matching canopy

Designed for dining rooms with tables for six to eight, and for hotel suites that include a separate dining area. The wider spread also suits long kitchen islands in open plan homes and small restaurant private rooms where a table needs even light along its length. Because the fixture hangs on a single anchor, it is frequently specified in apartments where structural reinforcement is not permitted, and the rod or chain option lets one design cover both flat and sloped ceilings in the same building.

We confirm table dimensions and ceiling height, then recommend diameter and drop so the fixture sits 750 to 850mm above the table surface. A drawing is issued for approval. Custom options include a longer drop for double height dining rooms, crystal colour in champagne or smoke, an eight arm frame on a smaller hub for narrow rooms, and a central switch version for rooms without an existing dimmer circuit.

Arms ship foam blocked in a single carton, with crystal drops in a labelled tray that identifies each hanging position. The canopy, rod or chain and hardware are bagged separately with the assembly card. Plating carries a removable film that stays on until the room is decorated, and the carton is drop tested to one metre before release.

Lead time is 16 to 24 days, with express options for interior fit out deadlines. Crystal spare allowance is six percent, arms and sleeves are stocked as replacement parts, and dimming compatibility guidance is supplied for the wall dimmer already installed in the property.