Adjustable Height Crystal Candle Chandelier Telescoping Rod 1200-3000mm Villa

Adjustable height sounds like a small feature until a project reaches installation: ceiling heights are confirmed late, a structural beam is discovered, the floor is finished thicker than planned, and a fixed rod chandelier arrives at the wrong length. This adjustable height crystal candle chandelier uses a telescoping rod that extends continuously from 1200 to 3000mm and locks with a concealed collar, so the final drop is set by the installing electrician on site rather than by a measurement taken months earlier. Cable and cores run inside the rod through a slip joint, so the electrical connection stays legal and invisible at any length. The same feature makes the fixture practical for villa foyers, stairwells and hotel entrances where seasonal decor changes the effective ceiling or where a client wants to adjust the fixture after furniture is placed.

• Continuous Telescoping Rod: The rod extends continuously from 1200 to 3000mm and locks with a concealed collar, so the final drop is set on site instead of relying on a measurement taken months earlier
• Internal Slip Joint Wiring: Cable and cores run inside the rod through a slip joint, keeping the electrical connection concealed and compliant at any extended length
• Late Change Protection: Ceiling height changes, discovered beams and thicker floor finishes no longer require a replacement rod, protecting the project schedule and the final invoice
• Post Installation Tuning: The drop can be adjusted after furniture is placed, letting a designer tune the relation between fixture and table or floor without new parts
• Concealed Collar Lock: The locking collar sits inside the canopy line so no clamp or screw is visible below the ceiling, preserving the clean architectural appearance of the fixture
• Family Styling: Candle arms, crystal dressing and finishes match the standard candle family, so an adjustable version can sit beside fixed drop fixtures in the same building

Designed for villa foyers, stairwells, hotel entrances and gallery landings where ceiling heights or floor levels are not finalised when the fixture is ordered. The adjustable rod also suits retail atriums and exhibition spaces that change their floor build between seasons, and rental or event properties where one fixture must cover several hanging conditions. Designers use it in residential projects where the client wants to fine tune the fixture height after furniture and rugs are in place.

We confirm the planned height range, ceiling construction and access, then specify rod travel and canopy size. A drawing shows the fixture at minimum and maximum extension. Custom options include a 4000mm maximum rod, a chain and rod hybrid for sloped ceilings, a locking collar with a tamper resistant screw for public spaces, and crystal colour or finish variation to match existing interiors.

The rod ships in a protective tube with the canopy and locking collar in a labelled hardware bag. Arms are foam blocked and crystal travels in a labelled tray. An installation card covers rod extension, collar locking torque and the wiring slip joint, and each unit is electrically tested at both ends of the rod travel before packing.

Lead time is 18 to 26 days, with express production for installation deadlines. Replacement rods and collars are stocked, a six percent crystal allowance is included, and a video walkthrough of the rod extension and locking process is supplied for installers. Longer rods are quoted separately if a project needs an extension beyond the standard travel.