| Operating Temperature | -45℃~85℃ |
| Delivery Time | 10 days |
| Elongationatbreak | 600% |
| Installation | Rapid Installation Using Standard Propane Torches |
| Adhesive Layer | High-performance Hot-melt Adhesive |
| Key word | Heat Shrink sleeve |
| Payment Terms | TT |
| Abrasion Resistant | The Hot-melt Adhesive Layer Ensures Excellent Bonding |
| Elongation Ratio | ≥600% |
| Supply Ability | 1000Sets/Day |
| Thickness | 2.0mm,2.5mm |
| Packaging Details | 37cmX37cmX47cm |
| Model Number | Collar |
| Brand Name | Heatshrink |
| Certification | ISO SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
Radiation Cross-Linked PE Heat Shrink Sleeve with Hot-melt Adhesive Layer for
Impact Resistance 15J Heat Shrink Sleeves Heat Shrink Collar Durable Sleeves
Fast-Applied Heat Shrink Collar for Watertight Pipeline Joint Sealing &
3LPP-120 Heat Shrink Sleeves – High-Temperature Field Joint Protection for 3LPP
Product Specification
| Operating Temperature | -45℃~85℃ | Delivery Time | 10 days |
| Elongationatbreak | 600% | Installation | Rapid Installation Using Standard Propane Torches |
| Adhesive Layer | High-performance Hot-melt Adhesive | Key word | Heat Shrink sleeve |
| Payment Terms | TT | Abrasion Resistant | The Hot-melt Adhesive Layer Ensures Excellent Bonding |
| Elongation Ratio | ≥600% | Supply Ability | 1000Sets/Day |
| Thickness | 2.0mm,2.5mm | Packaging Details | 37cmX37cmX47cm |
| Model Number | Collar | Brand Name | Heatshrink |
| Certification | ISO SGS | Place of Origin | China |
| High Light | Two-Layer Heat Shrink Tape ,ISO 21809 Type 14 Heat Shrinkable Wraparound Sleeve ,Direct Adhesion Field Joint Coating | ||
Two-Layer Heat-Shrinkable Field Joint Coating for PE-Coated Pipelines
Our ISO 21809 Type 14 2PE Heat Shrink Tape is a two-layer, heat-shrinkable wraparound sleeve designed for the corrosion protection of field joints on two-layer polyethylene (2PE) coated steel pipelines. Unlike three-layer systems that require a liquid epoxy primer, this 2PE tape relies on a high-performance hot-melt adhesive to bond directly to the prepared steel surface and the adjacent PE plant coating, forming a continuous, watertight seal without the need for a primer layer.
The product is classified under ISO 21809-3 Type 14 for heat-shrinkable coatings and is suitable for buried and submerged pipeline service where a two-layer coating system is specified.
| Layer | Component | Function |
|---|---|---|
| First Layer (inner) | High-performance hot-melt adhesive | Bonds to blast-cleaned steel and PE plant coating; seals the joint against moisture |
| Second Layer (outer) | Radiation cross-linked polyethylene backing | Mechanical protection, moisture barrier, UV resistance, shrink memory |
The absence of an epoxy primer layer distinguishes the 2PE system from 3PE alternatives. The hot-melt adhesive is formulated to achieve strong adhesion directly to steel, making the system suitable for applications where the specified coating type is 2PE.
| Feature | Benefit |
|---|---|
| ISO 21809-3 Type 14 Compliant | Meets international requirements for heat-shrinkable field joint coatings |
| Two-Layer Construction | Eliminates the epoxy primer step, simplifying field application and reducing installation time |
| Direct Adhesion to Steel and PE | Hot-melt adhesive bonds to both the steel weld and the adjacent 2PE plant coating |
| Wraparound Configuration | Installed over completed welds without sliding over the pipe end |
| Cross-Linked PE Backing | Provides mechanical protection, moisture resistance, and long-term UV stability |
| Uniform Shrinkage | Forms a tight, conformable seal around the weld and cutback area |
| Property | Typical Value |
|---|---|
| Backing Material | Radiation cross-linked polyethylene |
| Adhesive Type | Hot-melt adhesive |
| Backing Thickness | 0.8 – 1.5 mm (product-dependent) |
| Adhesive Thickness | 1.0 – 1.3 mm (product-dependent) |
| Total Thickness | 2.0 – 2.5 mm (product-dependent) |
| Width | 300 – 500 mm (customizable) |
| Length | 10 – 30 m per roll |
| Service Temperature | Up to 60°C / 80°C (grade-dependent) |
| Peel Strength to Steel | Per ISO 21809-3 requirements |
| Cathodic Disbondment | Per ISO 21809-3 requirements |
Values are indicative and shall be confirmed against the specific CNPetro product data sheet.
ISO 21809-3 specifies requirements for field joint coatings on buried and submerged pipelines. Type 14 designates heat-shrinkable coatings, with sub-classifications based on system construction and temperature rating. A Type 14 2PE system is a two-layer heat-shrinkable tape without an epoxy primer, suitable for 2PE mainline coatings.
The standard requires qualification testing of the complete applied system, including peel strength, cathodic disbondment resistance, impact resistance, indentation resistance, and thermal ageing at the maximum design temperature. This product is designed to meet the performance requirements of the applicable Type 14 classification.
| Item | Details |
|---|---|
| Configuration | Wraparound tape with closure patch |
| Width | 300 mm, 350 mm, 450 mm, 500 mm (customizable) |
| Length | 10 m, 30 m (customizable) |
| Customization | Project-specific dimensions available on request |
CNPetro — Protecting pipelines. Advancing performance.
For product data sheets, ISO 21809-3 qualification documentation, or technical consultation, please contact our sales team.
Keywords: ISO 21809-3 Type 14, 2PE heat shrink tape, heat shrinkable wraparound sleeve, two-layer field joint coating, PE pipeline corrosion protection, primer-free heat shrink tape
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
2000000-3000000
Employee Number:
36~89
Ecer Certification:
Verified Supplier
TIANJIN CNPETRO HITECH CO.,LTD CNPetro is a renowned high-tech company that specializes in corrosion protection, waterproofing, and sealing products.The company is famous for its innovative solutions for onshore and offshore construction and is committed to providing top-notch corrosion protection ... TIANJIN CNPETRO HITECH CO.,LTD CNPetro is a renowned high-tech company that specializes in corrosion protection, waterproofing, and sealing products.The company is famous for its innovative solutions for onshore and offshore construction and is committed to providing top-notch corrosion protection ...
Get in touch with us
Leave a Message, we will call you back quickly!