China factories

Chat Now Send Email
China factory - TIANJIN CNPETRO HITECH CO.,LTD

TIANJIN CNPETRO HITECH CO.,LTD

  • China,Tianjin ,Tianjin
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill
China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill

  1. China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill
  2. China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill
  3. China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill
  4. China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill
  5. China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill
  6. China Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill

Closed Tubular Heat Shrink Casing and Tubular Heat Shrink Sleeve with Foam Fill

  1. MOQ: 500 sets
  2. Price: Accordingly
  3. Get Latest Price
Abrasion Resistant The Hot-melt Adhesive Layer Ensures Excellent Bonding
Delivery Time 10 days
Elongation Ratio ≥600%
Elongationatbreak 600%
Thickness 2.0mm,2.5mm
Payment Terms TT
Operating Temperature -45℃~65℃
Supply Ability 1000Sets/Day
Key word Heat Shrink Collar
Installation Rapid Installation Using Standard Propane Torches
Adhesive Layer High-performance Hot-melt Adhesive
Packaging Details 37cmX37cmX47cm
Model Number Collar
Brand Name Heatshrink
Certification ISO SGS
Place of Origin China

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Abrasion Resistant The Hot-melt Adhesive Layer Ensures Excellent Bonding Delivery Time 10 days
Elongation Ratio ≥600% Elongationatbreak 600%
Thickness 2.0mm,2.5mm Payment Terms TT
Operating Temperature -45℃~65℃ Supply Ability 1000Sets/Day
Key word Heat Shrink Collar Installation Rapid Installation Using Standard Propane Torches
Adhesive Layer High-performance Hot-melt Adhesive Packaging Details 37cmX37cmX47cm
Model Number Collar Brand Name Heatshrink
Certification ISO SGS Place of Origin China
High Light Closed Tubular Design Heat Shrink Casing ,Foam Fill Compatible Heat Shrink Casing ,Pressure Testable Tubular Heat Shrink Sleeve
Closed-Type (Tubular) Heat Shrink Casing

Field Joint Encapsulation and Sealing for Pre-Insulated Pipelines


Product Overview

Our Closed-Type (Tubular) Heat Shrink Casing is a pre-formed, seamless heat-shrinkable sleeve designed for the encapsulation and sealing of field joints on pre-insulated (jacketed) pipelines. Unlike wraparound sleeves, this casing is supplied as a fully closed tubular structure that is slid over the pipe end before welding and then positioned over the joint after welding is completed.

This product is specifically engineered for pre-insulated pipeline field joints, providing a continuous outer jacket reconstruction that seals the insulation cavity against moisture ingress while delivering mechanical protection equivalent to the parent pipe insulation jacket.


Configuration for 10-Inch Application
Parameter Specification
Nominal Pipe Size 4'',6'',8'',10 inch
Suitable Pipe OD 114,168,273,355 mm
Casing Configuration Closed tubular (seamless)
Casing Thickness 2–4 mm
Width per Part Minimum 600 mm
Parent Pipe Insulation Gap 600 mm
Extension Past Inner Sleeve Edges 60 mm beyond each outer edge of the 1000 mm wide inner sleeve
Overlap Between Casing Parts 80 mm

The two-part configuration allows the casing to span the full insulation gap while providing controlled overlap at the center, ensuring a continuous sealed enclosure over the joint area.


System Function

In a pre-insulated pipeline system, the carrier steel pipe is wrapped with polyurethane foam insulation and protected by an outer jacket (typically HDPE). At field joints, this jacket must be reconstructed after welding to:

Seal the insulation cavity against groundwater and moisture ingress

Provide mechanical protection to the joint insulation equivalent to the parent jacket

Accommodate thermal movement of the carrier pipe without compromising the seal

The Closed-Type Heat Shrink Casing accomplishes this by shrinking down at both ends onto the parent jacket pipe, with a pre-applied or field-applied mastic sealant forming a watertight bond. The central portion remains at full diameter, creating a cavity that is subsequently filled with pour-in-place foam through a fill hole


Construction
Layer Material Function
Backing Radiation cross-linked high-density polyethylene (HDPE) Mechanical protection, UV resistance, shrink memory
Sealant (at ends) Elastomeric mastic / hot-melt adhesive Watertight sealing to parent jacket pipe
Central section Non-shrinking or reduced-shrink tubular section Maintains cavity for subsequent foaming

The cross-linked HDPE backing provides the necessary shrink force and thermal stability to withstand torch application without melting or degrading


Key Features & Benefits
Feature Benefit
Closed Tubular Design No seam or closure patch—inherently more reliable seal than wraparound alternatives
Two-Part Configuration Accommodates the full 850 mm insulation gap with controlled 80 mm center overlap
Extended Coverage 60 mm extension past the inner sleeve edges ensures complete encapsulation of the joint zone
Thick-Wall Construction  Provides mechanical protection comparable to the parent HDPE jacket
Heat-Shrink End Sealing Ends shrink down onto the jacket pipe with mastic, forming a permanent watertight bond
Foam Fill Compatible Central section remains at full diameter, allowing post-installation foam injection through a drilled fill hole
Pressure Testable Joint can be pressure-tested after casing installation and before foaming 1

Application Sequence

Pre-installation: Slide the closed casing sections over one pipe end before welding (or position on the carrier pipe prior to joint assembly).

Pipe Welding: Complete the girth weld and apply any required corrosion protection to the steel joint.

Surface Preparation: Clean and abrade the parent jacket pipe surfaces where the casing ends will seal.

Position Casing: Center the casing over the insulation gap, ensuring the two parts overlap by 80 mm and extend 60 mm past each inner sleeve edge.

Shrink Ends: Apply heat uniformly around each casing end with a propane torch until the backing shrinks down and the mastic sealant flows to form a watertight bond.

Pressure Test: Test the seal at the designated test port.

Foam Injection: Drill a fill hole in the central casing section and inject polyurethane foam to fill the joint cavity.

  1. Seal Fill Hole: Close the foam hole with a plug or welded patch


Typical Properties (Reference)
Property Typical Value
Backing Material Cross-linked HDPE
Backing Thickness 2–4 mm (project-specific)
Tensile Strength (HDPE) ≥ 23 MPa
Elongation at Break ≥ 600%
Hardness 60–67 Shore D
Max Operating Temperature 50–60°C (standard pre-insulated pipe service)
Shrink Ratio (ends) ≥ 25% radial recovery
Sealant Type Elastomeric mastic / hot-melt adhesive

Values are indicative and shall be confirmed against the specific product data sheet and project specification.


Standards & Compliance

Heat-shrinkable materials for pipeline field joint coatings are addressed under ISO 21809-3 (Petroleum and natural gas industries — External coatings for buried or submerged pipelines — Part 3: Field joint coatings), which classifies heat-shrinkable materials and specifies test requirements for peel strength, cathodic disbondment, impact resistance, indentation resistance, and thermal ageing

For pre-insulated district heating and jacketed pipeline systems, relevant product standards and industry practices apply in addition to ISO 21809-3, particularly regarding foam compatibility and pressure testing.


Primary Applications

Pre-insulated district heating pipelines — Field joint jacket reconstruction and sealing

Oil and gas pre-insulated flowlines — Joint encapsulation for temperature-maintained pipelines

Pre-insulated pipeline systems — Specifically configured for 355 mm OD carrier pipe with 850 mm insulation gap

Any jacketed pipeline requiring field joint sealing — Where a closed tubular casing is preferred over wraparound sleeves


CNpetro — Protecting pipelines. Advancing performance.

For project-specific configurations, data sheets, or technical consultation, please contact our sales team.


Keywords: closed type heat shrink casing, tubular heat shrink casing, pre-insulated pipe joint, field joint sealing, 10 inch heat shrink casing, ISO 21809-3, HDPE casing, foam injection joint

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller

  • Year Established:

    2010

  • Total Annual:

    2000000-3000000

  • Employee Number:

    36~89

  • Ecer Certification:

    Verified Supplier

TIANJIN CNPETRO HITECH CO.,LTD CNPetro is a renowned high-tech company that specializes in corrosion protection, waterproofing, and sealing products.The company is famous for its innovative solutions for onshore and offshore construction and is committed to providing top-notch corrosion protection ... TIANJIN CNPETRO HITECH CO.,LTD CNPetro is a renowned high-tech company that specializes in corrosion protection, waterproofing, and sealing products.The company is famous for its innovative solutions for onshore and offshore construction and is committed to providing top-notch corrosion protection ...

+ Read More

Get in touch with us

  • Reach Us
  • TIANJIN CNPETRO HITECH CO.,LTD
  • Yangliuging New Industry Park,Xiging District,Tianjin, 300000 //Dongmajuan industry park,Wuqing Destrict, Tianjin, 300000,,China
  • https://www.petrotape.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement