| Thickness | 2.0mm,2.5mm |
| Delivery Time | 10 days |
| DN | 114mm--800mm |
| Elongationatbreak | 600% |
| Installation | Rapid Installation Using Standard Propane Torches |
| Adhesive Layer | High-performance Hot-melt Adhesive |
| Payment Terms | TT |
| Designed for | Designed For The Corrosion Protection Of Pipeline Field Joints |
| Key word | Heat Shrink Collar |
| Supply Ability | 1000Sets/Day |
| Impact Resistance | ≥15J |
| Packaging Details | 37cmX37cmX47cm |
| Model Number | Collar |
| Brand Name | Heatshrink |
| Certification | ISO SGS |
| Place of Origin | China |
View Detail Information
Explore similar products
Radiation Cross-Linked PE Heat Shrink Sleeve with Hot-melt Adhesive Layer for
Impact Resistance 15J Heat Shrink Sleeves Heat Shrink Collar Durable Sleeves
Fast-Applied Heat Shrink Collar for Watertight Pipeline Joint Sealing &
3LPP-120 Heat Shrink Sleeves – High-Temperature Field Joint Protection for 3LPP
Product Specification
| Thickness | 2.0mm,2.5mm | Delivery Time | 10 days |
| DN | 114mm--800mm | Elongationatbreak | 600% |
| Installation | Rapid Installation Using Standard Propane Torches | Adhesive Layer | High-performance Hot-melt Adhesive |
| Payment Terms | TT | Designed for | Designed For The Corrosion Protection Of Pipeline Field Joints |
| Key word | Heat Shrink Collar | Supply Ability | 1000Sets/Day |
| Impact Resistance | ≥15J | Packaging Details | 37cmX37cmX47cm |
| Model Number | Collar | Brand Name | Heatshrink |
| Certification | ISO SGS | Place of Origin | China |
Complete Solution: Epoxy Primer + Heat Shrink Sleeves
Our 3LPE Field Joint Coating System is a fully integrated, three-layer corrosion protection solution designed for the welded joints of three-layer polyethylene (3LPE) coated pipelines. The system combines a two-component epoxy primer and a heat shrink sleeve to reconstruct the factory-applied 3LPE coating at every field joint, delivering performance equivalent to the mainline coating.
This product introduction covers the complete system: the epoxy primer (Part A + Part B) as the first layer, and the heat shrink sleeve as the second and third layers (adhesive + PE backing).
| Layer | Product | Function |
|---|---|---|
| First Layer | Epoxy Primer (A+B) | Bonds to blast-cleaned steel; provides cathodic disbondment resistance and primary corrosion barrier |
| Second Layer | Heat Shrink Sleeve – Adhesive | Bonds to the epoxy primer and adjacent 3LPE plant coating; seals the joint |
| Third Layer | Heat Shrink Sleeve – PE Backing | Mechanical protection, moisture barrier, UV resistance |
The epoxy primer is applied to the prepared steel surface, followed by installation of the heat-shrinkable sleeve. Heat application causes the sleeve to shrink and the adhesive to flow, forming a continuous bond to the steel and the adjacent 3LPE coating.
| Parameter | Specification |
|---|---|
| Type | Two-component, solvent-free or high-solids epoxy |
| Components | Part A (resin) + Part B (curing agent) |
| Color | Black, grey, or as specified |
| Recommended Dry Film Thickness | 150–200 μm |
| Pot Life (23°C) | Approx. 20–30 minutes |
| Application Temperature | ≥ 10°C surface temperature |
| Curing | Ambient or heat-assisted force cure |
| Compatibility | 3LPE, 3LPP, FBE plant coatings |
The epoxy primer provides the critical bond between the steel substrate and the heat shrink sleeve adhesive, while delivering cathodic disbondment resistance at the joint.
| Parameter | Specification |
|---|---|
| Type | Heat shrinkable wraparound sleeve |
| Backing Material | Radiation cross-linked polyethylene (PE) |
| Adhesive Type | High-performance hot-melt adhesive |
| Backing Thickness | 0.8 – 1.5 mm (product-dependent) |
| Total Thickness | 2.0 – 3.0 mm (product-dependent) |
| Width | Customized to joint length and pipe diameter |
| Service Temperature | 60°C / 80°C / 110°C (grade-dependent) |
| Configuration | Wraparound with closure patch |
The heat shrink sleeve reconstructs the 3LPE coating structure at the field joint, providing the same mechanical protection and moisture barrier as the factory-applied coating.
| Feature | Benefit |
|---|---|
| Complete 3LPE System | Epoxy primer + heat shrink sleeve supplied as an integrated solution |
| Mainline-Coating Equivalent | Reconstructs the 3LPE structure at the joint for monolithic corrosion protection |
| Epoxy Primer A+B | Two-component system provides superior adhesion and cathodic disbondment resistance |
| Heat Shrink Sleeve | Cross-linked PE backing and hot-melt adhesive deliver mechanical protection and moisture sealing |
| ISO 21809-3 Compliant | Meets international requirements for 3LPE field joint coatings |
| Temperature Grades Available | 60°C, 80°C, and 110°C options to match pipeline design temperature |
| Field-Proven | Suitable for buried, submerged, and above-ground pipeline service |
| Property | Test Reference | Typical Value |
|---|---|---|
| Peel Strength to Steel (23°C) | ISO 21809-3 | ≥ 5 N/mm |
| Peel Strength to Steel (Tmax) | ISO 21809-3 | ≥ 1.5 N/mm |
| Cathodic Disbondment | ISO 21809-3 | ≤ 10 mm radius (28 days) |
| Impact Resistance | ISO 21809-3 | ≥ 5 J/mm |
| Indentation Resistance | ISO 21809-3 | Pass at Tmax |
| Hot Water Immersion | ISO 21809-3 | Adhesion retained |
Values are indicative and shall be confirmed against the specific CNPetro product data sheet and project specification.
ISO 21809-3 specifies requirements for field-joint coatings on buried and submerged pipelines. The complete 3LPE system—epoxy primer + heat shrink sleeve—is qualified to the applicable Type 14 classification for heat-shrinkable coatings on 3LPE mainline pipelines. The standard requires testing of the complete applied system, including peel strength, cathodic disbondment, impact resistance, indentation resistance, and thermal ageing.
3LPE-coated pipeline field joints – Girth welds, tie-ins, and repair areas
Buried and submerged pipelines – Onshore and offshore environments
Oil and gas transmission lines – External corrosion protection
Water and sewerage pipelines – Joint protection and sealing
Pipeline rehabilitation – Restoration of damaged field-joint coatings on 3LPE lines
For a complete 3LPE field joint coating quotation, please provide:
| Information Required | Details |
|---|---|
| Pipeline size | Pipe OD and wall thickness |
| Joint length | Weld cutback width and required sleeve width |
| Design temperature | To select appropriate sleeve grade (60°C / 80°C / 110°C) |
| Quantity | Number of joints or total length of pipeline |
| Plant coating | 3LPE specification (standard or project-specific) |
We will provide a detailed quotation covering:
Epoxy Primer A+B (volume calculated per joint)
Heat Shrink Sleeves (dimensions per pipe size and joint length)
Closure patches and installation accessories
Technical documentation and compliance certificates
| Item | Details |
|---|---|
| Epoxy Primer | A+B kit, volume per joint requirement |
| Heat Shrink Sleeves | Wraparound configuration with closure patch |
| Customization | Sleeve dimensions, temperature grade, and primer volume customized per project |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
2000000-3000000
Employee Number:
36~89
Ecer Certification:
Verified Supplier
TIANJIN CNPETRO HITECH CO.,LTD CNPetro is a renowned high-tech company that specializes in corrosion protection, waterproofing, and sealing products.The company is famous for its innovative solutions for onshore and offshore construction and is committed to providing top-notch corrosion protection ... TIANJIN CNPETRO HITECH CO.,LTD CNPetro is a renowned high-tech company that specializes in corrosion protection, waterproofing, and sealing products.The company is famous for its innovative solutions for onshore and offshore construction and is committed to providing top-notch corrosion protection ...
Get in touch with us
Leave a Message, we will call you back quickly!