RS485 Signal 4000NTU Turbidity Electrode For Waste Water Measuring

Product Specification

RS485 Signal 4000NTU Turbidity Electrode For Waste Water Measuring

Turbidity is mainly understood as the cleanliness of the transparent medium, which refers to the suspension or uniform dispersion of tiny insoluble particulate matter in the transparent medium. The scattering and absorption of the incident light by the suspended matter results in the attenuation of the light. Turbidity is usually expressed by measuring changes in parameters such as the intensity of scattered light and the intensity of transmitted light. It is an optical effect expressed as the degree to which light is hindered from passing through a layer of water.

The turbidity calibration adopts the standard solution prepared by formazin, 1L of water contains 1mg of this substance, and the measurement result obtained by the principle of scattered light is called 1NTU (also called FNU). Turbidity is a physical quantity that characterizes an optical phenomenon and does not fully represent the actual concentration of suspended particulate matter. Because different particle sizes have an effect on turbidity, the same turbidity value does not represent the same particle concentration.

Specification:

Please click the user manual of RS485 turbidity controller here:

OPTU85 User Manual.pdf

Features＆ Advantages

● Based on the infrared absorption scattered light method, use ISO7027 method to determine the turbidity continuously and accurately;
● Not affected by sample chromaticity;
● Stable wavelength, stable data;
● Simple installation and calibration;
● Protection grade IP68, can work continuously and stably under water for
a long time;
● Self-diagnosis function, built-in humidity sensor and light source self-checker, effectively ensuring that the sensor issues maintenance prompts when necessary;
● Self-cleaning function can be selected according to the use environment to ensure the accuracy of the data.

Aplication:

Water treatment monitoring

Drinking water,surface water,water quality analyze,ground water,ect.

Industrial process monitoring and dosing control

Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.

FAQ

Q1. What is the measuring principle of the turbidity sensor?
A: The turbidity sensor is based on the infrared absorption scattered light method, use ISO7027 method to determine the turbidity continuously and accurately;

Q2. What is the advantage of digital turbidity sensor?
A: The digital turbidity sensor is conducive to long-distance signal transmission without serious signal attenuation. The sensor has RS485 interface, standard Modbus RTU communication protocol.

Q3. Can the conductivity sensor connector be detachable type?

Our conductivity sensor has three options: Undetachable by default, detachablt, wateproof and detachable. Can be flexibly selected according to the needs of the site.

Q4: Are you the final manufacturer? And can we visit your factory? 

A: Yes, We are manufacturer located in suzhou city, welcome to visit at any time.

Q5: Do you offer the OEM order ?

A: Yes, we can offer OEM service and label according to your requirements

Q6: How to make payment?

A: We accept T/T , credit card and West Union