Payment Terms | T/T |
Supply Ability | 100000 pcs / Month |
Delivery Time | 1-4 weeks |
Packaging Details | Cassette / Jar, put in a carton with PE foam. |
Product | Single Crystal Quartz |
Diameter | 2inch, 3inch |
Cut | X, Y, Z, AT, ST |
Thickness | 0.1mm, 0.2mm |
Surface Finish | SSP, DSP, lap |
Application | SAW, BAW |
Flat | Primary Flat |
TTV | <5um |
Brand Name | BonTek |
Model Number | Single Crystal Quartz |
Certification | ISO:9001 |
Place of Origin | China |
View Detail Information
Explore similar products
Customized Cuts Single Crystal Quartz Wafer
Piezoelectric Single Crystal Quartz Wafer 2inch c 4inch 6inch 8inch Per Request
Different Angle Cuts Of Single Crystal Quartz Customized Wafers
Seedless Single Crystal Quartz IRE Standard In X Cut , Y Cut , Z Cut
Product Specification
Payment Terms | T/T | Supply Ability | 100000 pcs / Month |
Delivery Time | 1-4 weeks | Packaging Details | Cassette / Jar, put in a carton with PE foam. |
Product | Single Crystal Quartz | Diameter | 2inch, 3inch |
Cut | X, Y, Z, AT, ST | Thickness | 0.1mm, 0.2mm |
Surface Finish | SSP, DSP, lap | Application | SAW, BAW |
Flat | Primary Flat | TTV | <5um |
Brand Name | BonTek | Model Number | Single Crystal Quartz |
Certification | ISO:9001 | Place of Origin | China |
High Light | Single Crystal Quartz Wafer Seedless ,BAW 3 inch wafer ,2inch Single Crystal Quartz Wafer |
Ultra-thin Single Crystal Quartz Wafer seedless or withseed SAW use BAW use
Quartz used in the manufacture of frequency control products is mono-crystalline of an asymmetric hexagonal form. Chemically, Quartz is Silicon Dioxide, SiO2. In its basic chemical form silicon dioxide cannot be used for frequency control and must be of the mono crystalline structure in which it exhibits usable piezoelectric qualities due to its asymmetric form. BonTek can fabricate any cut type single crystal quartz wafer.
Standard Quartz Wafer Specifications | |
Quartz Crystal Orientation | Y, X, Z, AT or ST cut. The cut angle can be rotated to any value in the in the range of 30 deg ~ 42.75 deg upon request. Primary flat: orientation specified by customer Secondary Flat: orientation specified by customer. Seed: located in the center with width < 5mm and height > 66mm |
Polished surface | Epi-ready polished on one side or two sides to Ra < 1 nm Working Area: Wafer diameter minus 3 mm (edge exclusion) BOW: < 20 um for 3" wafer and 30 um for 4" wafer No chips out on the working area. At the edge, chip width < 0.5 mm Pits and scratches: < 3 per wafer or < 20 per 100 wafers |
Standard Thickness | 0.5 mm +/- 0.05 mm TTV < 5 µm |
Standard Diameter | dia. 2 inch (50.8mm ) diam. 3 inch (76.2mm) dia. 4 inch (100mm) +/-0.2 mm Primary Flat: 22 +/- 1.5 mm (dia. 3¨ ) 32 +/- 3.0 mm ( dia. 4¨ ) Secondary Flat: 10 mm +/-1.5 mm |
Production Capacity | >1,000 wafers per month |
FAQs:
A: We look at ourselves as the piezo wafer specialist. We are the very first to work with Single Crystal Quartz in China about 30 years ago. Then gradually we step in the field of LiNbO3, LiTaO3, Quartz glass, LGS, CTGS etc. Especially, if you are looking for a piezo quartz supplier, we are the ultimate choice! We export millions of quartz blanks each year because we master the AT, SC and IT cuts with superior angle precision.
A: Yes, of course. We can fabricate as per your request. In addition, we are so experienced with piezo wafers that we can provide you relevant suggestions if you are not 100% sure about your choice. Besides, we do have some standard wafers in stock, please check with us.
A: Yes, we would suggest you go with the courier agent you are most familiar with (DHL, FedEX, UPS etc.). We can ship via your account. And, of course, we will pack the products safely in acceptable size to help you save the shipping cost. If you need us to take care of the freight, it’s also not a problem. We also have good discount with the international courier companies.
A: The wafer products are fragile and sometimes expensive. The last thing, as the manufacturer, we want to see is the products we make were damaged during courier. As a result, we will pack the wafers adequately and put them in a proper carton filled with buffer sponge. However, accidents are inevitable sometimes. So, please follow the “Acceptance check” steps shown in the drawings below. If the unwanted happened, we will either give the replenishment or refund if you follow the checking steps.
A: Sure. Factory inspection is important for large quantity purchase and long-term cooperation. Face to face discussion is what we mostly confident with. During the past years, big names around the world have witnessed our progress in factory build-up. These days, due to the Covid-19 pandemic, we also had the experience of videoconferencing with global buyers.
Acceptance Check
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
1999
Total Annual:
800M-1500M
Employee Number:
10~99
Ecer Certification:
Verified Supplier
Founded in 1999, Hangzhou Freqcontrol Electronic Technology Ltd. is a China leading manufacturer of piezoelectric crystal wafers, substrates, components and single crystal growth. We, known as the "CQT Group" in global market, headquartered in Hangzhou, China, empowered by its manufacturin... Founded in 1999, Hangzhou Freqcontrol Electronic Technology Ltd. is a China leading manufacturer of piezoelectric crystal wafers, substrates, components and single crystal growth. We, known as the "CQT Group" in global market, headquartered in Hangzhou, China, empowered by its manufacturin...
Get in touch with us
Leave a Message, we will call you back quickly!