Changzhou TIANNIU Transmission Equipment Co., Ltd
| Payment Terms | T/T, Western Union, MoneyGram, L/C, D/A, D/P |
| Supply Ability | 10000 per month |
| Delivery Time | 5-7 working days |
| Packaging Details | Cartons by sea shipping by airplane |
| Name | Oldham Shaft coupling |
| Material | Aluminium Steel |
| Inner Diameter | 16-70mm |
| Model | GHC series |
| Structure | Oldham Clamping type |
| Warranty | 12 months |
| Surface Treatment | Anodic oxidation treatment |
| Flexible or Rigid | Flexible |
| Brand Name | Tianniu |
| Model Number | GHC 40*50 |
| Certification | ISO 9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
16mmX18mm Oldham Shaft Coupling Mechanism Connection M3 Aluminum Alloy
Oldham Coupling Used To Connect Two Shafts Cross Slider Type 70X77mm M8
5/8" 3/8" 1/2 Flexible Shaft Coupling 25mm Oldham Joint Aluminium Servo Motor
20mmX25mm Oldham Shaft Coupling Clamp Sintered Aluminum Jaw M4
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram, L/C, D/A, D/P | Supply Ability | 10000 per month |
| Delivery Time | 5-7 working days | Packaging Details | Cartons by sea shipping by airplane |
| Name | Oldham Shaft coupling | Material | Aluminium Steel |
| Inner Diameter | 16-70mm | Model | GHC series |
| Structure | Oldham Clamping type | Warranty | 12 months |
| Surface Treatment | Anodic oxidation treatment | Flexible or Rigid | Flexible |
| Brand Name | Tianniu | Model Number | GHC 40*50 |
| Certification | ISO 9001 | Place of Origin | China |
| High Light | oldham flange coupling flexible ，oldham flange coupling 40X50mm ，flange coupling flex | ||
GHC 32X45 Flexible Oldham Clamping Shaft Cross Slider Coupling For Mechanism
Products Introduction
The Oldham type shaft coupling are designed to clamp evenly around the shaft and provide greater retention than fixed screw couplings without damaging shaft. Then tighten the clamping screws to secure. These are Oldham couplings. We are the manufactures of producing all kinds of shaft coupling. Customized couplings are also acceptable.
its shape is light and convenient to install, which saves time for the processing and production of enterprises. Secondly, it is resistant to oil corrosion and can be electrically insulated. Different slider elastomers are available. The sliding between the shaft sleeve and the intermediate piece can allow large radial and angular deviations. The special bump design in the middle can play a supporting role and allow large angular deviations without bending moment, so as to minimize the axial load
it has the advantages of simple structure, wide size range, small moment of inertia, convenient use and convenient visual inspection. Super oil corrosion resistance and electrical insulation minimize the axial load caused by deviation. The sliding between the shaft sleeve and the middle can allow large radial and angular deviation.
Assembly
1) During assembly, remove burrs and clean all parts
2) During assembly, ensure that the center lines of the two welding fork bearing holes in the middle are on the same plane, and the allowable difference shall not exceed 1 °. The spline part shall slide freely and the joint shall rotate flexibly
3) Clean the surface. Except that the flange end face and end face key are coated with antirust grease, the rest are brushed with antirust primer and then painted (paint is not allowed).
4) Regular lubrication. It is recommended to inject oil once a week and once a day under high temperature conditions.
5) In order to increase the service life of the cross slider type axle device, adjust the cross shaft 180 degrees each time to make the cross shaft journal used alternately
Products Parameters
Production Drawings
Production Datasheet
| model parameter | common bore diameter d1,d2 | ΦD | L | LF | LP | F | M | tightening screw torque (N.M) |
| GHC-16X21 | 4,5,6,6.35 | 16 | 21 | 8.6 | 11.6 | 2.5 | M2.5 | 1 |
| GHC-16X30 | 4,5,6,6.35 | 16 | 30 | 13.1 | 11.6 | 3 | M2.5 | 1 |
| GHC-20X22 | 5,6,6.35,7,8 | 20 | 22 | 8.6 | 12.7 | 2.5 | M2.5 | 1 |
| GHC-20x33 | 5,6,6.35,7,8 | 20 | 33 | 14.1 | 12.7 | 3 | M2.5 | 1 |
| GHC-25x28 | 5,6,6.35,8,9,9.525,10,11,12 | 25 | 28 | 11.7 | 16.65 | 3 | M3 | 1.5 |
| GHC-25X39 | 5,6,6.35,8,9,9.525,10,11,12 | 25 | 39 | 17.2 | 16.65 | 4.2 | M3 | 1.5 |
| GHC-32X33 | 5,6,8,9,9.525,10,11,12.12.7,14,15,16 | 32 | 33 | 14 | 19.5 | 3 | M4 | 2.5 |
| GHC-32X45 | 5,6,8,9,9.525,10,11,12,12.7,14,15,16 | 32 | 45 | 20 | 19.5 | 4.5 | M4 | 2.5 |
| GHC-40X50 | 8,9,9.525,10,11,12,14,15,16,17,18,19 | 40 | 50 | 23 | 18.4 | 7 | M5 | 7 |
| GHC-45X46 | 8,9,9.525,10,11,12,14,15,16,17,18,19,20,22 | 45 | 46 | 21 | 18.4 | 7 | M5 | 7 |
| GHC-50X53 | 10,11,12.7,14,15,16,17,18,19,20,22,24 | 50 | 53 | 24 | 15 | 7.5 | M6 | 12 |
| GHC-50X58 | 10,11,12.7,14,15,16,17,18,19,20,22,24 | 50 | 58 | 26.5 | 17.5 | 8 | M6 | 12 |
| GHC-55X57 | 10,11,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32 | 55 | 57 | 26 | 17.5 | 7.8 | M6 | 12 |
| GHC-63X71 | 14,15,16,17,18,19,20,22,24,25,28,30,32 | 63 | 71 | 33 | 24 | 10 | M8 | 20 |
| GHC-70X77 | 14,15,16,17,18,19,20,22,24,25,28,30,32,35,38 | 70 | 77 | 29.5 | 25 | 12 | M8 | 20 |
| model parameter | Rated torque (N.M)* | allowable eccentricity (mm)* | allowable deflection angle (°)* | allowable axial deviation (mm)* | maximum speed rpm | static torsional stiffness (N.M/rad) | moment of inertia (Kg.M2) | Material of shaft sleeve | Material of shrapnel | surface treatment | weight (g) |
| GHC-16X21 | 0.7 | 0.8 | 3 | ±0.2 | 8500 | 30 | 5.5x10-7 | High strength aluminum alloy | P A 6 6 | Anodizing treatment | 8 |
| GHC-16X30 | 0.7 | 0.8 | 3 | ±0.2 | 9000 | 30 | 5.9x10-7 | 12 | |||
| GHC-20X22 | 1.2 | 1.2 | 3 | ±0.2 | 6500 | 58 | 1.3x10-6 | 13 | |||
| GHC-20x33 | 1.2 | 1.2 | 3 | ±0.2 | 7000 | 58 | 1.5x10-6 | 19 | |||
| GHC-25X28 | 2 | 1.6 | 3 | ±0.2 | 5500 | 130 | 4.0x10-6 | 24 | |||
| GHC-25X39 | 22 | 1.6 | 3 | ±0.2 | 6000 | 130 | 4.5x10-6 | 35 | |||
| GHC-32X33 | 4.5 | 2 | 3 | ±0.2 | 4500 | 270 | 1.3x10-5 | 48 | |||
| GHC-32X45 | 4.5 | 2 | 3 | ±0.2 | 4800 | 270 | 1.5x10-5 | 67 | |||
| GHC-40X50 | 9 | 2.4 | 3 | ±0.2 | 3600 | 520 | 4.2x10-5 | 114 | |||
| GHC-45X46 | 12 | 2.5 | 3 | ±0.2 | 3500 | 800 | 4.5x10-5 | 140 | |||
| GHC-50X53 | 19 | 2.6 | 3 | ±0.2 | 3000 | 800 | 1.0x10-4 | 190 | |||
| GHC-50X58 | 19 | 3 | 3 | ±0.2 | 3000 | 800 | 1.1x10-4 | 215 | |||
| GHC-55X57 | 25 | 3.2 | 3 | ±0.2 | 3000 | 900 | 1.3x10-5 | 260 | |||
| GHC-63X71 | 33 | 3 | 3 | ±0.2 | 2550 | 1200 | 3.5x10-4 | 455 | |||
| GHC-70X77 | 56 | 3.5 | 3 | ±0.2 | 2500 | 1260 | 4.1x10-5 | 520 |
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller,Other
Year Established:
2007
Total Annual:
8,000,000-10,000,000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Changzhou Tianniu Transmission Equipment Co., Ltd Changzhou TIANNIU Transmission Equipment Co., Ltd is a professional one way clutch bearing supplier, the primary products are micro electromagnetic clutch, torque limiter coupling, sliding shaft coupling, flex... Changzhou Tianniu Transmission Equipment Co., Ltd Changzhou TIANNIU Transmission Equipment Co., Ltd is a professional one way clutch bearing supplier, the primary products are micro electromagnetic clutch, torque limiter coupling, sliding shaft coupling, flex...
Get in touch with us
Leave a Message, we will call you back quickly!