FLY AUTOMATION
| Payment Terms | T/T |
| Supply Ability | 1000 pcs /day |
| Delivery Time | within 1-10 working days after payment |
| Packaging Details | Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement |
| Name | Air Cylinder |
| Model | MHL2-10D2 |
| Body Material | Aluminum Alloy |
| Ambient and fluid temperature | -10℃ to 60℃ |
| Mode of action | Double acting |
| Rubber magnet | Synthetic rubber |
| Brand Name | SMC |
| Model Number | MHL2-10D2 |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
DNC-40-25-PPV-A 163337 Pneumatic Air Cylinders , Silvery Pneumatic Rotary
MHZ2-10D Air Gripper Micro Pneumatic Cylinder SMC MHZ2 Series
Original Festo Spare Parts AEVC-25-5-I-P-A 188160 Silvery Aluminum Standard
Airtac CS1-U CS1-UX Pneumatic Air Cylinders Magnetic Reed Switch Sensor LED
Product Specification
| Payment Terms | T/T | Supply Ability | 1000 pcs /day |
| Delivery Time | within 1-10 working days after payment | Packaging Details | Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement |
| Name | Air Cylinder | Model | MHL2-10D2 |
| Body Material | Aluminum Alloy | Ambient and fluid temperature | -10℃ to 60℃ |
| Mode of action | Double acting | Rubber magnet | Synthetic rubber |
| Brand Name | SMC | Model Number | MHL2-10D2 |
| Certification | CE | Place of Origin | CHINA |
| High Light | pneumatic actuator cylinder ，smc pneumatic cylinder | ||
MHL2-10D2 Double acting 0.1 to 0.6 Mpa Synthetic rubber Rack Staninless Steel Air cylinder
Advantage
1.One unit can handle workpieces withvarious diameters.
2.A large amount of gripping force isprovided through the use of adouble piston mechanism, whilemaintaining a compact design.
3.Double-end type oil-impregnatedresin bearings with a metal backingare used for all shafts.
4.Built-in dust-protection mechanismA high degree of freedom formounting
5.Auto switch mountable
Gripping Point
The workpiece gripping point distance should be within the grippingforce ranges given for each pressure in the effective gripping forcegraphs below.
operated with the workpiece gripping point beyond the indicatedranges, the load that will be applied to the fingers or the guide willbecome excessively unbalanced.
As a result, the fingers couldbecome loosened and adversely affect the service life of the unit.
Effective Gripping Force
Indication of effective gripping force.The gripping force shown in the tablesrepresents the gripping force of onefinger when all fingers and attachmentsare in contact with the work.F = one finger thrust.
How to Mount the Attachment to the Finger
(1) Make sure that the piston rod is retracted so as not to apply undue strain on the piston rod whilean attachment is being mounted to the finger.
(2) Do not scratch or dent the sliding portion of the piston rod. Damage to the bearings or sealsmay cause air leaks or faulty operation.
(3) Refer to the table below for the proper tightening torque on the bolt used for securing theattachment to the finger.
Auto Switch Mounting Brackets: Precautions
When auto switch is set on the mounting side as shown below, allow atleast 2 mm run off space on mounting plate since the auto switch isprotruded from the gripper edge.
Warning
If a workpiece is hooked onto the attachment, make sure that excessive impact willnot be created at the start and the end of the movement.
Failure to observe this precaution may result in shifting or dropping the workpiece,which could be dangerous.
Model
| Model | Bore size (mm) | Max.operating frequency c.p.m | Opening/Closing stroke(mm) (L2-L1) | Width at closing(mm) (L1) | Width at closing(mm) (L2) | Mass (g) |
| MHL2-10D | 10 | 60 | 20 | 56 | 76 | 280 |
| MHL2-10D1 | 40 | 40 | 78 | 118 | 345 | |
| MHL2-10D2 | 60 | 96 | 156 | 425 | ||
| MHL2-16D | 16 | 60 | 30 | 68 | 98 | 585 |
| MHL2-16D1 | 40 | 60 | 110 | 170 | 795 | |
| MHL2-16D2 | 80 | 130 | 210 | 935 | ||
| MHL2-20D | 20 | 60 | 40 | 82 | 122 | 1025 |
| MHL2-20D1 | 40 | 80 | 142 | 222 | 1495 | |
| MHL2-20D2 | 100 | 162 | 262 | 1690 | ||
| MHL2-25D | 25 | 60 | 50 | 100 | 150 | 1690 |
| MHL2-25D1 | 40 | 100 | 182 | 282 | 2560 | |
| MHL2-25D2 | 120 | 200 | 320 | 2775 | ||
| MHL2-32D | 32 | 30 | 70 | 150 | 220 | 2905 |
| MHL2-32D1 | 20 | 120 | 198 | 318 | 3820 | |
| MHL2-32D2 | 160 | 242 | 402 | 4655 | ||
| MHL2-40D | 40 | 30 | 100 | 188 | 288 | 5270 |
| MHL2-40D1 | 20 | 160 | 246 | 406 | 6830 | |
| MHL2-40D2 | 200 | 286 | 486 | 7905 |
Specifications
| Bore size(mm) | 10 | 16 | 20 | 25 | 32 | 40 |
| Fluid | Air | |||||
| Action | Double acting | |||||
| Operating pressure(Mpa) | 0.15 to 0.6 | 0.1 to 0.6 | ||||
| Ambient and fluid temperature | -10 to 60 ℃ | |||||
| Repeatability | ±0.1 | |||||
| Lubrication | Not required | |||||
| Effective gripping force (N) at 0.5 Mpa | 14 | 45 | 74 | 131 | 228 | 396 |
Construction
Component Parts
Samples
You can send a sample to customize the products, we have many engineers can help it; If you want a product of mine, but you are not sure if it's what you want, so you can ask for a sample from me, it will be free.
Products shopping guide
For example: you want to purchase a batch of cylinders but you don't know which type you are really want, so you can tell me all your requirement and I'll recommend to you.
Company Details
Business Type:
Manufacturer
Year Established:
2000
Employee Number:
51~200
Ecer Certification：
Verified Supplier
FLY Automation Co.,Ltd was founded in 2010. We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, angle seat valve, air preparation un... FLY Automation Co.,Ltd was founded in 2010. We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, angle seat valve, air preparation un...
Get in touch with us
Leave a Message, we will call you back quickly!