Ningbo Fly Automation Co.,Ltd
| Payment Terms | T/T , Western Union, PayPal |
| Supply Ability | 1000 pcs /day |
| Delivery Time | within 1-10 working days after payment |
| Packaging Details | Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement |
| Model | HR-1/2-D-MIDI-E |
| Body Color | White |
| Material | Aluminium |
| Regulator lockting | Rotary knob with detent |
| Brand Name | Festo |
| Model Number | HR-1/2-D-MIDI-E |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
SMC Air Preparation Units Techno Pressure Regulator AR2000-01 AR2000-02 AR2500
AC2010-02 Air Pump Compressor Oil Filter Regulator Trap Pressure Manual Drainage
Airtac Air Preparation Units and Accessories, AC2000,BC2000,BC3000,BC4000
Airtac Air Preparation Units Air Filter Regulator AFR2000,BFR2000,BFR3000
Product Specification
| Payment Terms | T/T , Western Union, PayPal | Supply Ability | 1000 pcs /day |
| Delivery Time | within 1-10 working days after payment | Packaging Details | Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement |
| Model | HR-1/2-D-MIDI-E | Body Color | White |
| Material | Aluminium | Regulator lockting | Rotary knob with detent |
| Brand Name | Festo | Model Number | HR-1/2-D-MIDI-E |
| Certification | CE | Place of Origin | CHINA |
| High Light | air preparation unit ，compressed air preparation | ||
HR-1/2-D-MIDI-E Pressure regulators 1/2" White Body With pressure gauge
Description
1.Also suitable for front panel mounting
2.Two pressure gauge connections for different fitting options
3.Good regulating characteristics with minimal pressure hysteresis
4.Two pressure regulation ranges: 0.5 … 7 bar and 0.5 … 12 bar
5.Setting values are secured by locking the rotary knob
6.Return flow option for venting from output 2 to input 1
7.Pressure sensor (optional) → 52
8.High flow rate
Care and maintenance
If a condensate level of approx.10mm below the filter element is reached:
●Open the bleeder screw by turning it in an anti-clockwise direction (see from below).The condensate can then flow out.
●Replace the filter element in time and do as follows:
-Exhaust the system and the regulator.
-Turn the filter bowl in an anti-cdockwise direction.
-Reft the individual parts (hold the new filter element only at the lower end).
Commission again in accordance with the chapter "Commissioning"
●Observe dust prevention,please use covering in the connector while the unitea is free.
●Use only the specified cleaning agents for cleaning:
-Water or soap suds (max.+60℃);
-Petroleum ether (free of aromatic compounds).
Standard Specification
| Size | Micro | Mini | Midi | Maxi |
| Pneumatic connection | M5, M7, G1/8, QS-4,QS-6 | G1/8, G1/4, G3/8 | G1/4, G3/8, G1/2, G3/4 | G1/2,G3/4,G1 |
| Constructional design | Directly actuated diaphragm regulator | Directly actuated diaphragm regulator | Pilot actuated piston regulator | |
| Regulating function | With secondary venting | Output pressure constant, with secondary venting, with primary pressure compensation, with return flow action | Output pressure constant, with secondary venting, with primary pressure compensation, with return flow action | |
| Type of mounting | 1.Via accessories 2.In-line installation 3.Front panel mounting | |||
| Assembly position | Any | |||
| Regulator lock | Rotary knob with detent | |||
| - | Rotary knob with integrated lock | |||
| Pressure regulation range [bar] | 0.5 … 7 | 0.5 … 7 | ||
| 0.5 … 12 | ||||
| Max. hysteresis [bar] | 0.3 | 0.2 | 0.4 | |
| Pressure indication | Via pressure gauge | |||
| M5 prepared | G1/8 prepared | G1/4prepared | G1/4prepared | |
Sectional view
| Size | Micro | Mini/Midi/Maxi | |
| With pressure gauge | Without pressure gauge | ||
| 1.Housing | Die-cast zinc | Die-cast zinc/aluminium | |
| 2.Connecting plates | Wrought aluminium alloy | Die-cast zinc/aluminium | |
| 3.Regulating knob | POM | PA | |
| 4.Knurled nut | – | Aluminium | |
| 5.Plug cap | PC | PC | |
| – Seals | NBR | NBR | |
After-sale service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
Company Details
Business Type:
Manufacturer
Year Established:
2000
Employee Number:
51~200
Ecer Certification：
Verified Supplier
Ningbo Fly Automation/Ningbo Airwolf Automation Co.,Ltd was founded in 2010. We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, ang... Ningbo Fly Automation/Ningbo Airwolf Automation Co.,Ltd was founded in 2010. We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, ang...
Get in touch with us
Leave a Message, we will call you back quickly!