K4000 CA/RCA40DD CA/RCA40MM Diaphragm Valve Repair Kit

Product Specification

K4000 Nitrile diaphragm kits CA/RCA40DD CA/RCA40MM Pulse Jet Valves integral piloted

Ordering Code: K4000 (M1182)/K3502(M1591)

Material: Nylon-Nitrile(NBR)

Nitrile is for -20~80°C

K4000 K3502 is used for CA40DD/MM RCA40DD/MM type pulse valve

The pulse valve diaphragm is a high-quality rubber diaphragm which is provided with a rivet head for sealing the air outlet of the compressed air duct or the plugging valve, a venting relief hole and a bolt hole for fixing the support. It is the key control component in the electromagnetic pulse valve. This repair kit has large air - outlet , so the air can get throgh very smoothly. We use high quality material , the collection equipment efficiency can be improved , the energy loss also can be reduced. Its lifespan is about 1 million cycle.

 Details :

Welcome cooperate with new and old customers future!

Installation

For your safety do not pressurise system until all valves and pipes are fully secured. Do not attempt to remove a fitted valve while system is under pressure.
1. Prepare supply and blowtube pipes* to suit valve type and specification. Avoid installing valves underneath the tank.
2. Ensure tank and pipes are free from dirt, rust or other particulate.
3. Ensure supply air is clean and dry.
4. Mount valves to inlet pipes (or flanges, tighten bolts to 10Nm) and blowtube to valves, ensuring no excess thread sealant can enter the valve itself. Ensure blowtube is fully inserted into the valve outlet.
5. Tanks and pipes must be independently restrained from FS and DD valves.
6. Connect RCAC pilot port to remote pilot valve, or install MIP/3DS screw in pilot valve.
7. Apply moderate pressure to system and check for installation leaks.
8. Fully pressurise system.
9. Test fire and listen for proper actuation and crisp pulse noise.
Valve is not a structural component. Do not rely on valve to retain tanks or pipe. Refer to Camlock product specifications for installation details.

Competitive Advantage:

Quality Standards :

The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount , but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance , according to the original quality standards , during warranty with product problems , need confirmation testing by the manufacturer , the supplier to be solved , the demand side due to storage , use, poor maintenance caused by lower-quality product , and not raise objections

Warranty:

All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.

Serves time
0:00 - 23:59
From Monday to Sunday

After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.