FLY AUTOMATION
| Payment Terms | T/T , Western Union |
| Supply Ability | 1000 pcs |
| Delivery Time | within 1-30 working days after payment |
| Packaging Details | Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement |
| Model code | MG8 MG10 MG25 MG40 MG50 MG80 MG100 |
| Make | AIRWOLF,GEMU |
| Material | EPDM |
| Color | Black |
| Size | 1/4" 3/8" 1/2" 3/4" 1" 1.5" 2" 2.5 " 3" 4" |
| Original | China Germany |
| Brand Name | FLY, AIRWOLF |
| Model Number | MG8 MG10 MG25 MG40 MG50 MG80 MG100 |
| Place of Origin | CHINA GERMANY |
View Detail Information
Explore similar products
Long Life K10200 Integral Piloted Pulse Jet Valves CA102MM RCA102MM
Autel Pulse Jet Valves Diaphragm Repair 846003002 Large Air Outlet
Autel fluororubber White 3 Inch Pulse Valve Diaphragm Repair Kit
DB120 3" Diaphragm Repair Kits for Mecair Pulse Jet Valves VNP220 VEM220
Product Specification
| Payment Terms | T/T , Western Union | Supply Ability | 1000 pcs |
| Delivery Time | within 1-30 working days after payment | Packaging Details | Plastic bags,Boxes, Cartons, Pallets,or according to customer's requirement |
| Model code | MG8 MG10 MG25 MG40 MG50 MG80 MG100 | Make | AIRWOLF,GEMU |
| Material | EPDM | Color | Black |
| Size | 1/4" 3/8" 1/2" 3/4" 1" 1.5" 2" 2.5 " 3" 4" | Original | China Germany |
| Brand Name | FLY, AIRWOLF | Model Number | MG8 MG10 MG25 MG40 MG50 MG80 MG100 |
| Place of Origin | CHINA GERMANY |
| DN(mm) | Port Size | Item code |
| 4-15 | 1/4“-1/2" | MG8 |
| 10-20 | 3/8"-3/4" | MG10 |
| 15-25 | 1/2 "-1" | MG25 |
| 32-40 | 1 1/4"-1 1/2" | MG40 |
| 50 | 2" | MG50 |
| 65 | 2 1/2" | MG65 |
| 80 | 3" | MG80 |
| 100 | 4" | MG100 |
Soft elastomer diaphragms consist of EPDM rubber mixtures,
which are peroxidically cross-linked (vulcanised) with each
other. This enables the diaphragms to be used safely, even at
high media temperatures. The diaphragms are provided with
diff erent technical features dependent on the mixture used
and on the processing conditions such as the duration of the
cross-linking process, the vulcanisation temperature as well as
the vulcanisation pressure. The following statement applies in
principle to soft elastomer materials: the higher the temperature
load capability, the lower the service life is in relationship to the
mechanical stress. Therefore both the temperature load and
the deformability of diaphragms must be optimally adjusted to
the application. Diff erent constructional designs are available
to achieve this. Soft elastomer diaphragms are characterised
by a high insensitivity in the case of mechanically contaminated
working media, e.g. cellular lumps, solid matter or catalytic solid
matter. Slurries usually do not aff ect the function of the valve or
the seal on the valve weir. Diff erent EPDM rubber mixtures can
be selected according to the operating/sterilisation temperatures
and the chemical characteristics or the working media.
Construction:
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, UPS will be normal ways. If you require use of a courier, we can do it.
Competitive Advantage
| Our product features | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
The installment introduction:
1. First, Confirm the pulse valve in good condition and then installed
2. Pulse valve will be installed directly the outer wall of flange of gas manifold. The spray pipe across the gas manifold. According to the drawing and manual, the pulse valve matching appropriate spray pipe and installation. To avoid the valve install in the air manifold bottom. If the pulse valve matched trachea and connector, the connector will be used for sealing purpose only. It can not as structural support components. It can not rely on the straight connector fixed spray torch and package. The spray pipe and air manifold must be fixed independent.
3. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. To ensure that provide compressed air clean and dry. The air manifold system provides moderate pressure and check for leaks installation. ( it can brush on soap and water, check whether the interface is bubble). Pressure was carried out on the air bag inflated (pressure of the valve is around 0.03 ~ 0. 86 mpa), recommend for air pressure 0.8 mpa maximum
6. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.
After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
The exhaust chamber volume of improved DMF pulse valve is increased. The permeability magnetic material of pulse valve is increased, and also, the materials of structure of diaphragm and pressure spring are improved, so that the exhaust volume of valve is increased to raise the magnetic strength and sensitivity as well as the element reliability and operation stability of pulse valve. Its service life will be greatly prolonged.
Company Details
Business Type:
Manufacturer
Year Established:
2000
Employee Number:
51~200
Ecer Certification：
Verified Supplier
FLY Automation Co.,Ltd was founded in 2010. We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, angle seat valve, air preparation un... FLY Automation Co.,Ltd was founded in 2010. We have many years experience in producing pneumatic components . Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, angle seat valve, air preparation un...
Get in touch with us
Leave a Message, we will call you back quickly!