Ningbo Brando Hardware Co., Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100000pcs per month |
| Delivery Time | Negotiation |
| Packaging Details | inner boxes,cartons,pallets |
| Body Material | Aluminum Alloy |
| Seal Material | NBR, FKM |
| Port Size | G 3/4 Inch |
| Power | Solenoid |
| Application | Dust Collector |
| Orifice Diameter | 20mm |
| Action | Pilot Operated |
| Pressure range | 0.1 MPa~0.8 MPa |
| Temperature range | -25℃ to +80℃ |
| Brand Name | Brando |
| Model Number | DMF-ZM-20 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Aluminum SS30 3 / 4 Inch Port Pulse Jet Solenoid Valve Z Type SCG353A043
Normally Close Threaded Ports Pneumatic Pulse Valve Similar As CA45T RCA45T
CA76MM 220V AC 50/60HZ Pneumatic Pulse Valve , Dust Collector Pneumatic
Right Angle Aluminium Pneumatic Pulse Valve CA50T QR DIN43650A SS304 Ferrule
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100000pcs per month |
| Delivery Time | Negotiation | Packaging Details | inner boxes,cartons,pallets |
| Body Material | Aluminum Alloy | Seal Material | NBR, FKM |
| Port Size | G 3/4 Inch | Power | Solenoid |
| Application | Dust Collector | Orifice Diameter | 20mm |
| Action | Pilot Operated | Pressure range | 0.1 MPa~0.8 MPa |
| Temperature range | -25℃ to +80℃ | Brand Name | Brando |
| Model Number | DMF-ZM-20 | Certification | CE |
| Place of Origin | China | ||
| High Light | BFEC Pulse Valve ，BFEC Diaphragm Valve ，BFEC Solenoid Valve | ||
G 3/4 Inch Right Angle Dust Removal Solenoid Pulse Valve DMF-ZM-20 BFEC Type With Aluminum Alloy Body
DMF-ZM-20 Pulse Jet Valve is Widely Used In Dust CLean System.It's an important part of bag filter.
This Valve is Right Angle Pneumatic Pulse Valve With Aluminum Alloy Body.It is controlled by a pilot valve. It can open and close the diaphragm valve of the high pressure air source to generate the pulse valve at the same time. It is also known as the electromagnetic pulse valve or the pneumatic control pulse valve.
Working Principles
The electromagnetic pulse valve is composed of electromagnetic pilot operator, diaphragm and valve body. Due to difference of pressure acting on two sides of the diaphragm, the diaphragm is pressed closely against the outlet of valve to keep the valve stays in “closed” position.
1)When energized by an electric signal from the controller, the electromagnetic armature will move to open the discharge opening of back cavity. The compressed air in back cavity bursts out to relief pressure and pressurized air in front cavity pushes up the diaphragm to open the main outlet of valve, then the electromagnetic pulse valve opens and starts to blow.
2)When the signal disappears and the spring works immediately to send the pilot operator back to its original position and close the discharging opening. The diaphragm will close the passage by the effect of the pressure in the front cavity and the spring. The pulse valve stops blowing.
3)The orifice in the diaphragm damps the airflow when the armature is lifting up for releasing the pressure. When the discharge hole closed, the pressure gas will fill into the front cavity to close the passage by the diaphragm. The pulse valve stops blowing.
Specification of DMF-ZM-20 Pneumatic Pulse Valve
| Moder Number | DMF-ZM-20 |
| Nominal Size | 20 |
| Port Size | 3/4 Inch |
| Blowing Area | 3.5~6m2 |
| Number Of Diaphgrams | 1 |
| KV | 17.55 |
| CV | 20.48 |
| Pressure | -25℃ to +80℃ |
| Voltage | AC220V, AC110V, AC24V, DC24V |
| Diaphragm Material | NBR(Nitrile) or VITON (NBR for -5~80°C; VITON for -5~230°C) |
Dimension Of DMF-ZM-20 fixed nut pulse valve for bag filter
Details About DMF-ZM-20 Electromagnetic Valve For Dust Collector
Deconstruction Diagram Of DMF-ZM-20
More Details About DMF-ZM-20 Pulse Jet Valve On Youtube
Features Of DMF-ZM Series Pulse Jet Valve
1.We Can provide three specifications of valves from 20, 25, and 40S for the selection of pulse bag dust collectors.
2.The valve body and valve cover are densely die-cast, anti-corrosion performance.
3.The gasket on the diaphragm is made of metal and rubber, which has good rigidity and does not leak.
4.The electromagnetic pilot head has a large suction force and is sensitive and reliable.
5.The performance is stable and reliable, and the service life of the diaphragm reaches more than one million times or three years.
Note
A. The inlet and outlet ends of the nozzle and the injection pipe inserted into the electromagnetic pulse valve should be maintained at a certain depth. 20 valves is not less than 15 mm.
B. The ZM valve body cannot be used to support and fix the air distribution box (air bag) and the blowing pipe. Special measures shall be taken to support and fix it.
Welcome to your any question and inquiry!
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2008
Total Annual:
8million-9million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr... * Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr...
Get in touch with us
Leave a Message, we will call you back quickly!