Ningbo Brando Hardware Co., Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100000pcs per month |
| Delivery Time | 7 working days |
| Packaging Details | inner boxes,cartons,pallets |
| Model NO. | 2W160-15 |
| Body Material | Brass |
| Material of Oil Seal | NBR,EPDM or VITON |
| Motion Pttern | Direct Acting |
| Type | Normal Close |
| CV | 4.8m³/h |
| Joint Pipe Bore | 1/2" |
| Operation Fluid Viscosity | 20 CST Below |
| Voltage | 220V |
| Orifice | 16mm |
| Fluid Temperature | -5~80℃ |
| Brand Name | BRANDO |
| Model Number | 2W160-15 |
| Certification | ISO、CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Solenoid Valve For PHILIPS Steam Iron GC8651 GC8616 GC8650
PHILIPS Steam Iron Solenoid Valve 423901709890 292202199016
PHILIPS Steam Generator Iron Solenoid Valve 423901709890 292202199016
PHILIPS Steam Irons Solenoid Valve GC7430 GC8220 GC8225 GC8261
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100000pcs per month |
| Delivery Time | 7 working days | Packaging Details | inner boxes,cartons,pallets |
| Model NO. | 2W160-15 | Body Material | Brass |
| Material of Oil Seal | NBR,EPDM or VITON | Motion Pttern | Direct Acting |
| Type | Normal Close | CV | 4.8m³/h |
| Joint Pipe Bore | 1/2" | Operation Fluid Viscosity | 20 CST Below |
| Voltage | 220V | Orifice | 16mm |
| Fluid Temperature | -5~80℃ | Brand Name | BRANDO |
| Model Number | 2W160-15 | Certification | ISO、CE |
| Place of Origin | China | ||
| High Light | Brass Water Solenoid Valve ，Brass Electric Solenoid Valve ，Brass Liquid Solenoid Valve | ||
2W160-15 Brass Water Solenoid Valve For Water Treatment System DN15
The below is 2 Position 2Way Normally Closed Solenoid Valve 2W160-15 is used for Water Treatment System.This Valve body made of Forged Brass, Direct Drive, and normally closed.Able to be operated directly without pressure.This is a unidirectional valve, therefore the valve will only stop media while closed traveling along the direction of the valve’s arrow; the valve is not intended to be used with media travelling both ways.
Specification of DN15 Port 2W160-15 solenoid water valves
1.2W: Two Position Two Way Solenoid Valve(Direct Drive Type)
2.160: Aperture Of Flow Rate is 16mm
3.15: The Joint Pipe Bore is G1/2"
4.Standard Voltage : 220V Voltage Range : ±10%
5.Working medium : air,water,oil,gas
6.Motion Pattern : Direct Drive Type
7.Cv Value : 4.8
8.Operation Fluid Viscosity : below 20 CST
9.Working Pressure : Oil:0~5kgf/cm² Gas:0~7kgf/cm² Water:0~5kgf/cm² Air:0~7kgf/cm²
10.Max.Pressure Resistance : 10.5 kgf/cm²
11.Operating Temperature Range : -5~80°C
Features of 2 Position 2 Way of 1/2" 2W160-15 Water Diaphrgam Valves
1.Working Medium: Air,Water,Oil and Gas.
2.Motion Pattern: Direct Drive.
3.Type:Normal Close Type.
4.Body material: Brass.It has good wear resistance.
2W160-15 2 Way NC Solenoid Valve Technical Data
| Model | 2W160-15 |
| Working Medium | Air,Water,Oil and Gas |
| Motion Pattern | Direct Drive |
| Type | Normal Close Type |
| Aperture of flow rate(mm) | 16 |
| CV | 4.8m³/h |
| Voltage | 220V |
| Operation Fluid Viscosity | 20 CST Below |
| Pipe Bore | 1/2'' inch |
| Fluid Temperature Range | -5~80℃ |
| Max.Pressure Resistance | 10.5kgf/cm² |
Overall Dimension Drawing of Brass Body Solenoid Valve 2W160-15
| Model | 2W160-15 |
| A | 101.5 |
| B | 57 |
| C | 117 |
| D | 69 |
| K(PT) | 1/2'' |
Product disassembly diagram of AC220V/DC24V voltages brass 2W160-15 solenoid valves
Details Enlargement of 1/2'' inch 2/2 Way Solenoid Valve 2W160-15
About Installation:
1.Before using the solenoid valve for water, pay attention to the product label and read the instruction manual carefully to judge whether the product meets the conditions of use.
2.There is an arrow indicating the direction of flow on the stainless valve body.
3.An inline filter is recommended to keep debris from impeding on the flow and seal.
4.The coil is 220 Volts AC with a tolerance of +/- 10% making it perfect for 220 Volt AC power systems.
Solenoid valve failure and troubleshooting methods:
1.Valves Do Not Open
Power Failure→ reconnect and connect the connector
Uneven Pressure /Wrong Voltage→ adjust to normal position
Dirt Under The Diaphragm→clean the pipe or install a pre-filter
2.Valves Can Not Be Closed
The seal of the main valve core or iron core has been damaged → replace the seal
Impurities into the solenoid valve core or moving iron core → clean
3.
other information:
1. Internal leakage → check whether the sealing ring is damaged and the spring assembly is incorrect;
2. External leakage → loose connection or damaged seal → tighten the screw or replace the seal;
Welcome your any Enquiry of Solenoid Valve, We Produce Many Kinds, We Will Response While We Reeive your Enquiry.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2008
Total Annual:
8million-9million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr... * Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr...
Get in touch with us
Leave a Message, we will call you back quickly!