Ningbo Brando Hardware Co., Ltd
| Payment Terms | T/T, PayPal, Western Union |
| Supply Ability | 100000 pcs per month |
| Delivery Time | Negotiation |
| Packaging Details | Individual Boxes, Carton, Pallet |
| Applicable Industrie | Automation |
| Fluid | Air (to be filtered by 40 μm filter element) |
| Port Size | In=Out=1/8'' |
| Valve Type | Double Solenoid 5 Port 2 Position |
| Voltage | 220VAC, 110VAC, 24VDC, 12VDC |
| Connector | Flying Leads |
| Operating pressure | 0.15 to 0.8MPa(21-114psi) |
| Temperature | -20 to +70℃ |
| Max. frequency | 5 cycle/sec |
| Body material | Aluminum alloy |
| Action | Internal pilot |
| Brand Name | Brando |
| Model Number | 4V120-06 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
1/2'' Double Coils 5/2 Way Pneumatic Cylinder Valve 4V420-15 0.15-0.8MPa
Silver Color Lead Wire or Connector type 5/3 Way Pneumatic Air Control Valve
5/2 Way 1/8'' NPT 4V120-06 Internal Pilot Aluminum Alloy Double Solenoid
Cng Injector Rails Solenoid Valve Parts Valve Stems 22g Two Way Type
Product Specification
| Payment Terms | T/T, PayPal, Western Union | Supply Ability | 100000 pcs per month |
| Delivery Time | Negotiation | Packaging Details | Individual Boxes, Carton, Pallet |
| Applicable Industrie | Automation | Fluid | Air (to be filtered by 40 μm filter element) |
| Port Size | In=Out=1/8'' | Valve Type | Double Solenoid 5 Port 2 Position |
| Voltage | 220VAC, 110VAC, 24VDC, 12VDC | Connector | Flying Leads |
| Operating pressure | 0.15 to 0.8MPa(21-114psi) | Temperature | -20 to +70℃ |
| Max. frequency | 5 cycle/sec | Body material | Aluminum alloy |
| Action | Internal pilot | Brand Name | Brando |
| Model Number | 4V120-06 | Certification | CE |
| Place of Origin | China | ||
| High Light | Airtac Solenoid Valve ，5/2 Way Pneumatic Solenoid Valve ，5 Way 2 Position Pneumatic Solenoid Valve | ||
AirTAC Type 5/2 Way 1/8'' Double Coil Pneumatic Solenoid Valve 24VDC 220VAC 4V120-06 With Flying Leads
Two-position three-way solenoid valves are usually used with single-acting pneumatic actuators. Two positions are controllable at two positions: on-off, three-way ventilation is provided by three channels. In general, one channel is connected to the air source, and the other two are connected. One channel is connected to the air inlet of the actuator, and one is connected to the exhaust port of the actuator. The specific working principle can refer to the working principle diagram of the single-acting pneumatic actuator.
4V Series Solenoid Valve Features:
1. Pilot-oriented mode: optional for internal or external;
2. Structure in sliding column mode: good tightness and sensitive reaction;
3. Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life;
4. It is available to form integrated valve group with the base to save installation space;
5. Affiliated manual devices are equipped to facilitate installation and debugging;
6. Several standard voltage grades are optional;
Dimension of 4V120-06 Pneumatic Solenoid Valve:
Specifications of 4V Series Internal Pilot Operated Pneumatic Valve:
Details:
Installation Instructions:
1. Before installing, be sure the valve hasn’t been damaged via transportation.
2. It’s suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.
3. Please notice whether the installation condition accords with technical requirements (such as “voltage”, “actuation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.
4. Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.
5. Take measure to avoid vibration and frozen.
6. Before using the fittings and tubes make sure they are clean. When connecting to fittings, be sure the PTFE Thread Seal Tape is used correctly.
7. To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.
8. After installing, please use the manual override to test valve first.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2008
Total Annual:
8million-9million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr... * Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr...
Get in touch with us
Leave a Message, we will call you back quickly!