Ningbo Brando Hardware Co., Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100000pcs per month |
| Delivery Time | Negotiation |
| Packaging Details | inner boxes,cartons,pallets |
| Port Size | G3 Inch |
| Media | Air |
| Power | Solenoid |
| Structure | Diaphragm |
| Function | Normally Closed |
| Action Type | Pilot Operted |
| Valve Type | Right Angle |
| Connection Type | Threaded |
| Brand Name | Brando |
| Model Number | CA76T |
| Certification | ISO、CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Aluminum SS30 3 / 4 Inch Port Pulse Jet Solenoid Valve Z Type SCG353A043
Normally Close Threaded Ports Pneumatic Pulse Valve Similar As CA45T RCA45T
CA76MM 220V AC 50/60HZ Pneumatic Pulse Valve , Dust Collector Pneumatic
Right Angle Aluminium Pneumatic Pulse Valve CA50T QR DIN43650A SS304 Ferrule
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100000pcs per month |
| Delivery Time | Negotiation | Packaging Details | inner boxes,cartons,pallets |
| Port Size | G3 Inch | Media | Air |
| Power | Solenoid | Structure | Diaphragm |
| Function | Normally Closed | Action Type | Pilot Operted |
| Valve Type | Right Angle | Connection Type | Threaded |
| Brand Name | Brando | Model Number | CA76T |
| Certification | ISO、CE | Place of Origin | China |
| High Light | Goyen Pulse Valve ，Goyen Diaphragm Valve ，Goyen Solenoid Valve | ||
3'' Goyen Type Pneumatic Pulse Valve Right Angle Threaded Type With Aluminum Alloy Body CA76T
CA76T Goyen Type Threaded Valve consist of solenoid coil, armature assembly, diaphragm ,aluminum alloy body and other screws. Pulse valve refers to a diaphragm valve that can be opened and closed by a high pressure gas source in an instant under the control of a pilot valve such as electromagnetic or pneumatic. The pulse valve is the main component of the bag filter, and it can be sprayed more than 1 million times. The pulse valve is based on the airflow through the air resistance,The delay of the air volume makes the long signal input become a pulse signal.
Specification:
| Model No. | CA76T |
| Port Size | G 3 Inch |
| Nornimal Size | Φ76mm |
| Pressure | 0.3~0.8 Mpa |
| Number of Diaphragm | 2 |
| Media | Air |
| Temp | -5℃ ~ 55℃ |
| Relative Humidity | ≤85% |
| Service Life | Over 1000000 times |
| Voltage | DC24V, AC24V, AC110V, AC220V |
Overall Dimension of CA76T solenoid Pulse Valve:
Construction of CA76T Electromagnetic Pulse Valve:
| Part Name | Material |
| Body | Aluminum Alloy (diecast) |
| Ferrule | 305 SS |
| Armature | 430FR SS |
| Seals | Nirtrile or FKM |
| Spring | 304 SS |
| Screws | 302 or 304SS |
| Diaphragm Seat | NBR( common , all available) |
Failure analysis and troubleshooting
1.Does not operate when powered on
1). Poor contact in power wiring → Connect the power cord
2).The power supply voltage is not within the allowable range → the adjustment voltage is within the normal range
3).Coil shorted or burned out → Replace the coil
2. Fluid cannot pass when opening the valve
1). Fluid viscosity or temperature does not match → adjust pressure or working pressure difference or replace suitable product
2). Impurities are mixed around the valve core and the moving iron core → To clean the inside, a filter must be installed before the valve
3).Pre-valve filter or pilot valve hole blocked → Clean filter or pilot valve hole in time
4). The operating frequency is too high or the life has expired during use → change product model or replace with new product
3. The fluid cannot be shut off when the valve is closed
1). Fluid viscosity and temperature do not match → Replace with a suitable product
2). Deformed or expired spring → Add gasket or replace spring
3). Defective or soiled valve seat → wash, grind, or renew
4. Leakage
1). Loose pipe connection → Tighten bolts or pipe threads
2). Damaged seal at pipe connection → Replace seal
5. Noise is too loud when power is applied
1). Loose fastener → tighten
2). Voltage fluctuation, out of allowable range → adjust to normal range
3). Unsuitable fluid pressure or working pressure difference → Adjust pressure or
working pressure difference or replace product
4).Impurities on armature suction surface → Clean in time
Maintenance Kits:
| Nirtrile | FKM | Low Temp–60°C (–76°F) MIN. | Includes |
| K7600 | K7601 | NA | Diaphragm kits include main and secondary diaphragms (where required) and all springs. |
| K0380 | K0384 | NA | O-ring, armature assembly, armature spring, ferrule |
Welcome to your any question and inquiry!
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2008
Total Annual:
8million-9million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr... * Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr...
Get in touch with us
Leave a Message, we will call you back quickly!