Ningbo Brando Hardware Co., Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 100000pcs per month |
| Delivery Time | 4-8 day Days |
| Packaging Details | inner boxes,cartons,pallets |
| Size | 3'' |
| Air Hole | With |
| Spring | With |
| Packaging | Individual Sealed |
| Diaphragm Material | Nitrile/Buna |
| Suitable Valve Number | DMF-Z-76S, MF-Z-76S, DMF-Y-76S, MF-Y-76S |
| Diaphragm Outer Distance | 201mm |
| Center distance | 182mm |
| Seat OD | 102mm |
| Brand Name | Brando |
| Model Number | D76 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Pulse Jet Valve Fabric Reinforced Rubber Diaphragms 0.2Mpa - 0.8Mpa Working
Mounted Stainless Steel Orifice Rubber Diaphragm , Valve Replacement Diaphragm
NBR EPDM Solenoid Valve Diaphragm K2016 K2017 Clean Air Working Medium
Square Solenoid Valve Diaphragm K2501 K2503 More Than 1 Million Cycles Working
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 100000pcs per month |
| Delivery Time | 4-8 day Days | Packaging Details | inner boxes,cartons,pallets |
| Size | 3'' | Air Hole | With |
| Spring | With | Packaging | Individual Sealed |
| Diaphragm Material | Nitrile/Buna | Suitable Valve Number | DMF-Z-76S, MF-Z-76S, DMF-Y-76S, MF-Y-76S |
| Diaphragm Outer Distance | 201mm | Center distance | 182mm |
| Seat OD | 102mm | Brand Name | Brando |
| Model Number | D76 | Certification | CE |
| Place of Origin | China | ||
| High Light | SBFEC Type Pulse Jet Valve ，BFEC Membrane Rebuild Kit ，Replacement Dust Collector Diaphragm Kit | ||
3'' DMF/MF Series Black Rubber BFEC Impulse Valve Diaphragm Repair Kit
This is repair kit NBR diaphragm for 2 1/2'' SBFEC DMF-Z-62S MF-Z-62S DMF-Y-62S MF-Y-62S pulse solenoid valves. And Brando has manufactured and exported diaphragm repair kits more than 10 years, almost all of our customers were satisfactory with our quality and credibility.
Available Models of BFEC DMF/MF Series Diaphragm Repair Kit:
| Ordering Code | Fitted Valve Code | Port Size |
| DTY | MF/DMF-T-25S, MF/DMF-T-40S, MF/DMF-T-50S, MF/DMF-T-62S, MF/DMF-ZM-40S, MF/DMF-Y-40S, MF/DMF-Y-50S, MF/DMF-Y-62S, MF/DMF-Y-76S, MF/DMF-YA-76S, MF/DMF-YB-76S, MF/DMF-Y-102S, MF/DMF-Y-102SA, MF/DMF-Y-102SE, MF/DMF-ZF-40S, MF/DMF-Z-40S, MF/DMF-Z-50S, MF/DMF-Z-62S, MF/DMF-Z-76S, MF/DMF-Z-102S | Secondary Diaphragm |
| D20A | DMF-Z-20, MF-Z-20, DMF-ZM-20, MF-ZM-20 | 3/4'' |
| D25 | DMF-Z-25, MF-Z-25, DMF-ZM-25, MF-ZM-25, DMF-ZF-25, MF-ZF-25, DMF-Y-25, MF-Y-25, DMF-T-20, MF-T-20 | 3/4'' & 1'' |
| D40 | DMF-Z-40S, MF-Z-40S, DMF-Y-40S, MF-Y-40S, DMF-ZF-40S, MF-ZF-40S, DMF-ZM-40S, MF-ZM-40S, DMF-T-25S, MF-T-25S | 1'' & 1-1/2'' |
| D50 | DMF-Z-50S, MF-Z-50S, DMF-Y-50S, MF-Y-50S, DMF-T-50S, MF-T-50S | 2'' |
| D62 | DMF-Z-62S, MF-Z-62S, DMF-Y-62S, MF-Y-62S | 2-1/2'' |
| D76 | DMF-Z-76S, MF-Z-76S, DMF-Y-76S, MF-Y-76S | 3'' |
| D102 | DMF-Z-102S, MF-Z-102S, DMF-Y-102S, MF-Y-102S | 4'' |
| D102A | DMF-Y-102SA, MF-Y-102SA | 4'' |
| DZL-20B | DMF-ZL-B, MF-ZL-B | 3/4'' |
Dimension Diagram:
The installment introduction
1. First, Confirm the pulse valve in good condition and then installed
2. Pulse valve will be installed directly the outer wall of flange of gas manifold. The spray pipe across the gas manifold. According to the drawing and manual, the pulse valve matching appropriate spray pipe and installation. To avoid the valve install in the air manifold bottom. If the pulse valve matched trachea and connector, the connector will be used for sealing purpose only. It can not as structural support components. It can not rely on the straight connector fixed spray torch and package. The spray pipe and air manifold must be fixed independent.
3. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. To ensure that provide compressed air clean and dry. The air manifold system provides moderate pressure and check for leaks installation. ( it can brush on soap and water, check whether the interface is bubble). Pressure was carried out on the air bag inflated (pressure of the valve is around 0.03 ~ 0. 86 mpa), recommend for air pressure 0.8 mpa maximum
6. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2008
Total Annual:
8million-9million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr... * Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers fr...
Get in touch with us
Leave a Message, we will call you back quickly!