2.2mm pitch 5A male and female 4pin magnetic connector with 90 degrees angle

Product Specification

2.2mm pitch 5A male and female 4pin magnetic connector with 90 degrees angle .

UPE – Professional Magnetic Connector & Cable Manufacturer | Custom Solutions

UPE stands as a premier manufacturer at the forefront of connectivity technology. We specialize in the design and production of advanced magnetic connectors and high-performance cable assemblies.

Male magnetic connector:

Materials:
-Insulator: HTN+30% UL94 V-0 black

-Magnet: Neodymium iron boron

Mechanical:

-Contact force:80g±20g at 1.0mm working storke

-Male and female adsorption Life test: 50,000cycle

-Adsorption capacity test:The parent docking adsorption is more than 600G

Electrical:

-Reference voltage:12V,
-Continuous working current: 5.0 A;
-Contact static impedance of the needle:50mΩ Max (PIN).
-High voltage test: AC1000 V0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.

Environmental performance:

-Environmental Test: Salt Spray 48 hours

Product application explaination(not limited to the following):
1. The PCB board can be soldered with a plug-in;
2. After soldering, the board can be molded and coated;
3. The PCB board can be connected with a terminal;
4. The mold can be molding and injection molding;
5. The wire can be directly soldered.

Female magnetic connector

Materials:

-The yellow metal needle part is gold-plated with brass surface;
-The plastic material is HTN+30%UL94 V-0 black, which can withstand high temperatures.
-The magnet adopts high-performance permanent magnet neodymium iron boron;

Electrical properties:
-Reference voltage: 12V,
-Continuous working current: 5.0 A;
-Contact static impedance of the needle:50mΩ Max (PIN).
-High voltage test: AC1000 V 0.5mA 3SEC / DC 1000V 0.5mA 3 SEC.

.Product introduction and explaination:
-The product adopts environmental protection materials, ROHS,REACH;
-The attraction force of the magnetic male and female docking is more than  600G.

Product anti-short-circuit structure design;
-Polarity and electrical direction are clearly identified.
(The magnet can be coated with epoxy resin, and the salt spray test can pass 48hours.)
-The pin feet are fixed on the PCB board, and the pin spacing size is stable.

Product application explaination (not limited to the following):
1. The PCB board can be soldered with a plug-in;
2. Mold molding and injection molding;

4Pin Male Magnetic  Connectors & Female Magnetic Connector Parameter: 

4Pin Male Magnetic  Connector Technical Drawing

4Pin Female Magnetic Connector Technical Drawing

Advantages of Magnetic Connector:

1)Automatic adsorption connected experience; Easy operation;

2)Uses a magnetic interface to remove the device easier. 

3)High life cycle. It supports 50,000-300,000 reattachment life times;

4)It is easy to customized waterproof design, the female can achieve dust-proof and waterproof (IP68);

5)Support a high current (3A-20A), faster recharge;

6)Excellent corrosion rating (48H-120H) meet the harsh environments；

8)Shape customized to meet with product shape matching, improve product selling point;

9)Magnet positioning, use of magnets and structure to dual circuit protection reach distinguish 

the direction( It is user-oriented and user-friendly)

10)Excellent scalability interface,Can be achieved(Power Signal Video Audio Jack Etc);

11)Development time is short, low-cost mold for customization;

12)Provide a reliable high RF signal transmission. Our connector is USB 2.0 

Magnetic connector products application:

Why UPE shall be your partner?

1. Professional customization service
2. Fast sample production capability
3. Strict quality control system
4. Processing with imported components
5. High-precision test equipment
6. Reasonable cost control procedures
7. Product environmental standards

How to Place Your Magnetic Connector Order with UPE

1. Submit Your Requirements

Contact our sales team via:

Email: [union@upetech.net]

Phone: [+86 13434524996]

Online Form: [www.pogopinsconnector.com]

Provide details:

✔ Application (e.g., medical, automotive, consumer electronics)

✔ Connector type (e.g., magnetic pogo pin, charging cable)

✔ Specifications (voltage, current, size, waterproof rating, etc.)

✔ Quantity & lead time

2. Get a Custom Solution (If Needed)

Our engineers will review your needs and propose a custom design (if required).

We’ll share 3D models, samples, or technical drawings for approval.

Payment Term: 

50% Deposit (Paid upfront): Covers production costs (materials, labor).

50% Balance (Paid before shipment): Ensures quality control and commitment from both parties.

Payment method:

T/T (Bank Transfer),PayPal ,OCBC Bank

Recommendation:

Use PayPal for samples (safer).

Use T/T for bulk orders (lower fees).

Sample Lead Time: Inventory sample 2-3Working day/customized sample 5-7Working day

Production Lead Time:10-15Working day

Made For: America,Europe,Asia,South African

Trade Term: EXW

Freight: Air,Sea,Express

Service: High quality with reasonable price, OEM service, any special size, color, designs are acceptable

Shipping