SHENZHEN FEIYANG PROTECH CORP.,LTD
| Payment Terms | L/C, T/T |
| Supply Ability | More than 20000 tons per year |
| Delivery Time | 7 days after orders comfirmed |
| Packaging Details | 200kgs net weight in a steel drum |
| Viscosity | 200-500 |
| Relative density | 1.04 |
| Brand Name | Zhuhai Feiyang |
| Model Number | FEC-1361 |
| Certification | ISO 9001-2015, ISO 14001-2015 |
| Place of Origin | Zhuhai, |
View Detail Information
Explore similar products
G-002 Epoxy Curing Agent
YD-5208 Epoxy Curing Agent
Water-based Epoxy Curing Agent YD-8218
Water-based Epoxy Curing Agent YD-8502A
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | More than 20000 tons per year |
| Delivery Time | 7 days after orders comfirmed | Packaging Details | 200kgs net weight in a steel drum |
| Viscosity | 200-500 | Relative density | 1.04 |
| Brand Name | Zhuhai Feiyang | Model Number | FEC-1361 |
| Certification | ISO 9001-2015, ISO 14001-2015 | Place of Origin | Zhuhai, |
PROFILE
FEC-1361(Equivalent to Ancamine 2726) is a mixed amine-modified hardener.
PROPERTY
Corrosion-resistant, low viscosity, high gloss, fast reaction.
APPLICATIONS
Used for floor topcoat.
INDEX
| Appearance | Colorless transparent viscous liquid |
| Viscosity:25℃ | 200-500mPa.s |
| Relative density:25℃ | 1.06 |
| Amine value | 290±20mgKOH/g |
| Relative density(25℃) | 1.04 |
| Active Hydrogen Equivalent Weight (AHEW) | 104 |
| Ratio(For E51 100g) | 100/60 |
| Gel time(25℃, 150g) | 15-30min |
| Drying time(25℃, 3mm) | 1-2h |
| Shore D(3mm, 24h) | ≥80D |
Basic data is based on the E-51 epoxy resin (E-51 is bisphenol A type, with an epoxy equivalent of 180-190).
CURING CHARACTERISTICS
1. Curing exotherm:
FEC-1316 was mixed with Bispheno1-A epoxy resin with an oxygen equivalent of about 190, with a total weight of 150g. The curing exotherm measured at a room temperature of 23℃ is shown in the table below:
| Ratio=Epoxy resin/Hardener | 100/60 |
| Peak generate heat time | 22min |
| Peak generate heat temperature | 122℃ |
| Pot-life | 20-30min |
2. Curing and drying properties:
FEC-1316 was mixed with Bispheno1-A epoxy resin with an oxygen equivalent of about 190 according to a certain ratio. The curing and drying properties were measured using an RCI drying tester at 23°C and 5°C, as shown in the following table: Dry film thickness: 150µm
| Ratio=Epoxy resin/Hardener | 100/60 | |
| 23℃ | Touch drying time | 2.5h |
| Initial drying time | 6h | |
| Complete drying time | 12h | |
| 5℃ | Touch drying time | 7h |
| Initial drying time | 24h | |
| Complete drying time | 38h | |
3. Physical properties after curing:
YD-8252 was mixed with Bispheno1-A epoxy resin with an oxygen equivalent of about 190, and after a 7-day curing period at a room temperature of 23℃, the physical properties measured are as follows.(Based on JIS K6911)
| Ratio=Epoxy resin/Hardener | 100/60 |
| Tensile strength | 540kg/cm2 |
| Bending strength | 620kg/cm2 |
| Compressive strength | 800g/cm2 |
| Elongation | 3.5% |
| Impact strength | 174kg/cm/cm2 |
| Shore D | 83D |
| Heat deflection temperature | 47℃ |
PACKING
25Kgs/Drum(plastic drum), 200Kgs/Drum(carbon steel drum)
SHELF LIFE
Packaged in plastic or carbon steel containers, protected by nitrogen, and stored sealed at room temperature. The shelf life is one year.
STORAGE
Should be sealed in the original packaging container and placed in a dry place at 0-40℃ (the temperature cannot be lower than 0℃). Do not place it in the sun.
NOTICE
Please take safety precautions when using this product and refer to the Product Safety Data Sheet (SDS).
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Other
Year Established:
1992
Total Annual:
80000000-100000000
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Feiyang Protech Corp., Ltd. specializes in researching and producing polyaspartic polyurea resin and other new chemical products. We are recognized as a "National Special New Key Little Giant" and a "State-level High-tech Enterprise", with more than 50 polyaspartic polyurea inven... Feiyang Protech Corp., Ltd. specializes in researching and producing polyaspartic polyurea resin and other new chemical products. We are recognized as a "National Special New Key Little Giant" and a "State-level High-tech Enterprise", with more than 50 polyaspartic polyurea inven...
Get in touch with us
Leave a Message, we will call you back quickly!