Leak-Proof Super Absorbent Polymer (SAP) 9003-04-7 for Efficient Sludge

Product Specification

Product Description

The Leak-Proof Super Absorbent Polymer (SAP), CAS No. 9003-04-7, is a high-performance, cross-linked polyacrylate designed specifically for sludge solidification and water-based liquid immobilization.
This advanced polymer rapidly absorbs free liquid and converts high-moisture sludge into a stable, non-leaking, easy-to-handle solid mass, significantly improving treatment efficiency in industrial, municipal, mining, and environmental applications.

Engineered with superior absorption kinetics and high gel strength, the polymer ensures zero leaching, no secondary pollution, and excellent stability under compression or long-term storage.
It is suitable for a wide range of water-based liquids, including industrial sludge, tailings slurry, drilling waste, and emergency spill fluids.

 Product Advantages

1. Ultra-Fast Absorption & Solidification

• Quickly absorbs hundreds of times its own weight in liquid.

• Forms a solid gel within seconds to minutes.

2. No Leakage, No Re-Release

• High cross-linking network permanently locks water inside the polymer.

• Maintains stability even under pressure or during transportation.

3. High Performance in Complex Sludge Systems

• Effective for high-moisture sludge, fine particle slurry, mining tailings, and alkaline or saline waste liquids.

• Strong gel integrity even in challenging environments.

4. Significant Cost Reduction

• Low dosage required to achieve ideal solidification.

• Reduces transportation weight, disposal costs, and labor time.

5. Environmentally Safe & Non-Hazardous

• Non-toxic, non-corrosive, and compliant with environmental safety standards.

• No heavy metals, no harmful by-products, and no secondary contamination.

6. Easy Application

• Can be directly sprinkled or mixed into sludge.

• Works with both manual and automated dosing systems.

FAQ

Q1: What is the typical dosage for sludge solidificatio?

A: Dosage usually ranges from 0.1% to 1.0% depending on moisture content, sludge type, and the required final strength. Field testing is recommended for optimization.

Q2: Will the solidified material release water again?

A: No. The polymer creates a strong, non-leaching gel structure that retains water permanently and prevents re-release even under compression.

Q3: Can the SAP work in high-salinity or high-pH sludge?

A: Yes. This SAP maintains good performance in saline, alkaline, or chemically complex environments, although the absorption capacity may vary.

Q4: Is this product environmentally friendly?

A: Yes. It is non-toxic, non-corrosive, and classified as non-hazardous. It does not produce harmful gases or heat during absorption.

Q5: Is the gelled mass acceptable for landfill disposal?

A: In most regions, yes. The stabilized gel meets typical landfill requirements. Users should check local regulations for compliance.

Q6: Can this SAP absorb oil-based liquids?

A: No. It is designed for water-based liquids. It does not effectively absorb oils or hydrocarbons.

Q7: Does SAP require special storage or transportation?

A: No special requirements. Store in a cool, dry place away from moisture. The product is stable and easy to handle.